| Characteristic |
Description |
 | |
| Platform | AIC Server Platform CB401-AG Family, Model XP1-C401AGXX |
| Server Board | AIC Server Board Auriga
One AMD EPYC 7002 (Rome) or 7001 (Naples) processor, max TDP 200W
slots for installing DDR4-3200 memory modules
2 SATA ports, 4 USB 3.0 ports, IPMI
2 slots M.2 PCIe 3.0 x2 or SATA format 2260/2280/22110
Baseboard Management Controller Aspeed AST2500 |
| Form Factor | 4U, rack mountable |
| Processor | 1 x AMD EPYC 7002/7001 processor with max TDP 200W
Processor socket Socket SP3, AMD Zen 2 (Rome) / Zen 1 (Naples) architecture, 7 nm process technology
Up to 64 cores, 128 threads, operating frequency up to 3.7 GHz (maximum 4.1 GHz in Boost mode)
Up to 256MB L3 cache per CPU, per core: 512KB L2, 64KB (I)+ 32KB (D) L1
Support for Precision Boost technologies, SMT multi-threading
2 x 128-bit FMAC compute units (4 floating point instructions per cycle)
128 PCIe 4.0 lanes per CPU
Supports ECC DDR4-3200 memory, up to 4TB, integrated eight-channel memory controller |
| Chipset | System on Chip (SoC) (the chipset is built into the processor) |
| System Memory | Memory types:
- DDR4 ECC Registered Memory (RDIMM) 1.2V, DDR4 ECC Registered Memory 3DS (RDIMM 3DS) 1.2V
- DDR4 ECC Load Reduced Memory (LRDIMM) 1.2V, DDR4 ECC Load Reduced Memory 3DS (LRDIMM 3DS) 1.2V
Maximum RAM (the processor supports a maximum of 4TB of RAM):
- for RDIMM - 512 GB (8 x 64 GB), for LRDIMM - 1024 GB (8 x 128 GB)
- for RDIMM 3DS - 1024 GB (8 x 128 GB), for LRDIMM 3DS - 2048 GB (8 x 256 GB)
Memory modes: 3200 MT/s
Integrated eight-channel memory controller (IMC) on the processor
Total 8 channels per CPU, one memory module per channel (1 DPC)
Total 8 memory modules per CPU
Memory subsystem bandwidth 204.8 GB/s |
| Network Adapters | Dedicated 1Gb Ethernet RJ-45 management port based on Realtek RTL8211E
Replaceable I/O module in OCP 2.0 bay (connection to CPU) via motherboard connector (QSFP+, QSFP28 ports)
Up to 4 network adapters in standard PCIe 3.0 slots |
| Expansion Slots | Two PCIe 3.0 x16 low-profile half-length (LP) slots, CPU-connected
Two PCIe 3.0 x16 full-height half-length (FHHL) slots, CPU connection
Ten PCIe 3.0 x16 (or 20 x8) full-height, full-length, double-wide (FHFLDW) slots, connected to the CPU via two PCIe bus extenders |
| Disk Subsystem Controller | Integrated SATA controller, 2 ports 6Gb/s:
- 2 x 7-pin SATA connectors with SATA DOM support
Two slots for installing M.2 PCIe 3.0 x2 or SATA drives, format 2280/22110
Additionally, HBA adapters and/or SAS/SATA RAID controllers in expansion slots |
| Disk Subsystem | Up to 6 hot-swappable 3.5"/2.5" SAS3/SATA3 HDD/SSD drives in a cage on the rear panel of the server.
Connectors on the basket for connecting cables:
- 2 HD Mini-SAS connectors for SATA/SAS3 drives;
Storage device connection options:
For SATA and/or SAS drives:
to a SAS RAID controller or HBA using HD Mini-SAS -> HD Mini-SAS cables (up to 6 drives, additional cables required);
to the Tri-Mode controller with a 2 x HD Mini-SAS -> 2 x HD Mini-SAS or SLIMLINE x8 -> 2 x HD Mini-SAS cable (depending on the controller model, up to 6 drives, additional cable required).
Up to 2 hot-swappable 2.5" SATA3/SAS HDD/SSD drives in a cage on the rear panel of the server.
Cable tray connectors: 2 x 7-Pin SATA connectors for SATA/SAS3 drives.
Storage device connection options:
For SATA drives:
- to the integrated SATA controller with two 7-Pin SATA cables (enabled by default for two drives).
For SATA and/or SAS drives:
- to SAS RAID controller or HBA with HD Mini-SAS -> 4 x 7-Pin SATA cable (for 2 drives, additional cable required);
- to the Tri-Mode controller with a cable HD Mini-SAS -> 4 x 7-Pin SATA or SLIMLINE x8 -> 8 x 7-Pin SATA (depending on the controller model, for 2 drives, an additional cable is required). |
| Additional Storage | Up to two internal SATA DOM drives with connection to integrated SATA controller
Up to two internal M.2 2280/22110 PCIe 3.0 x2 or SATA drives in M.2 slots on motherboard
Up to two internal M.2 PCIe 3.0 x4 or SATA drives when installing the LSI3408 RAID adapter in the expansion slot (Boot RAID 0/1)
Up to two internal M.2 PCIe 3.0 x4 2280/22110 drives with installation on an expansion card in a PCIe slot
Up to two HHHL PCIe SSDs in standard expansion slots |
| Optical Storage | External only via USB port |
| Interfaces | Front panel: 2 USB 3.0 ports
On the rear panel: DB-15 video connector, RJ-45 1GbE management port |
| Video Adapter and GPU | Integrated 2D video controller, Aspeed AST2500 Advanced PCIe Graphics, 1920x1200@60Hz 32bpp |
| Control Panel | Control buttons: Power, Reset, System ID
Indication: Power LED, System Status LED, UID LED |
| Management and Monitoring | Aspeed AST2500 Advanced PCIe Graphics & Remote Management Processor, IPMI 2.0
Built-in RJ-45 1GbE remote management port
Fully featured remote management (iKVM, Media Redirection, IPMI over LAN, Serial over LAN, SMASH Support, HTML5, Redfish)
Monitoring voltages, temperatures, fan speeds |
| Supported Operating Systems | Ubuntu Desktop 16.04.6
Ubuntu Desktop 18.04
Ubuntu Desktop 20.04.1
Ubuntu Server 20.04.1 (64 bit)
Microsoft Windows Server 2016 x64
Microsoft Windows Server 2019 x64 |
| Power Unit | x 2000W 80 Plus Platinum hot-swappable redundant power supplies |
| System Cooling | 3 x 120x25mm redundant, hot-swappable system fans
x 120x38mm redundant, hot-swappable system fans
10 x 40x56mm redundant, hot-swappable system fans
1 fan in each power supply |
| Dimensions | Height 17.45 cm, width 43.5 cm, depth 83.0 cm |
| Rack Mount Installation | Sliding rails for installing the server in a rack (included) |
| Power Supply Parameters | 200-240 VAC, 10A, 50-60 Hz |
| Operating Environment | Operating temperature from 0°C to +35°C
Storage temperature from -10°C to +60°C
Relative humidity during storage from 5% to 95% |
| Warranty | Standard 36 months warranty, on-site service |