| Characteristic |
Description |
 | |
| Platform | Server platform ASUS ESC8000A-E11 (manufacturer code 90SF0214-M000V0) |
| Server Board | ASUS Server Board KMPG-D32
One or two AMD EPYC 7003 (Milan) or 7002 (Rome) processors, maximum TDP 280W
Interprocessor interface 256 GB/s (96 PCIe 4.0 Lines)
32 slots for installing DDR4-3200 memory modules
8 SATA ports, 4 USB 3.2 Gen1 ports, IPMI
Baseboard Management Controller Aspeed AST2600 |
| Form Factor | 4U, rack mountable |
| Processor | 1 or 2 AMD EPYC 7002/7003 processors with a maximum TDP of 280W each
For each processor:
Processor socket Socket SP3, AMD Zen 2 (Rome) / Zen 3 (Milan) architecture, 7 nm process technology
Up to 64 cores, 128 threads, operating frequency up to 3.7 GHz (maximum 4.1 GHz in Boost mode)
Up to 768MB L3 cache per CPU, per core: 512KB L2, 64KB (I)+ 32KB (D) L1
Support for Precision Boost technologies, SMT multi-threading
2 x 128-bit FMAC compute units (4 floating point instructions per cycle)
128 PCIe 4.0 lanes per CPU, 64 of which are used as interprocessor interface
Supports ECC DDR4-3200 memory, up to 4TB per CPU (up to 8TB total), integrated eight-channel memory controller |
| Chipset | System on Chip (SoC) (the chipset is built into the processor) |
| System Memory | Memory types:
DDR4 ECC Registered Memory (RDIMM) 1.2V, DDR4 ECC Registered Memory 3DS (RDIMM 3DS) 1.2V
- DDR4 ECC Load Reduced Memory (LRDIMM) 1.2V, DDR4 ECC Load Reduced Memory 3DS (LRDIMM 3DS) 1.2V
Maximum RAM (the processor supports a maximum of 4TB of RAM):
- for RDIMM - 2048 GB (32 x 64 GB), for LRDIMM - 4096 GB (32 x 128 GB)
for RDIMM 3DS - 4096 GB (32 x 128 GB), for LRDIMM 3DS - 8192 GB (32 x 256 GB)
Memory modes: 3200 MT/s (1 DPC) | 2933, 3200* MT/s (2 DPC), depending on the number of memory modules per channel (DPC)
Integrated eight-channel memory controller (IMC) on the processor
Total 8 channels per CPU, two memory modules per channel (2 DPC)
Total 16 memory modules per CPU, 32 memory modules per server
Memory subsystem bandwidth from 85.3 GB/s to 204.8 GB/s depending on the processor model
* with appropriate BIOS settings |
| Network Adapters | Without integrated network controller
Dedicated 1 Gb Ethernet RJ-45 management port
Additionally:
network adapters in standard PCIe 4.0 expansion slots |
| Expansion Slots | 8 PCIe 4.0 x16 slots for full-height, full-length, dual-slot expansion cards
Additional expansion slots via riser cards:
- PCIe 4.0 x8/x16 Full Height, Half Length slot on the front panel
- PCIe 4.0 x16/x16 Full Height, Half Length slot on the rear panel |
| Disk Subsystem Controller | Without integrated SATA controller
SATA/SAS drives require installation of a RAID controller or HBA
4 x PCIe 4.0 x4 ports for NVMe drives (2 x SFF-8654 SLIMLINE x8 connectors, one used for front riser card)
Additionally (selection in the Configurator fields "Disk subsystem controller" and "HBA adapter):
- RAID controller, HBA adapter or Tri-Mode controller in the PCIe 4.0 expansion slot for SAS3 and/or SATA drives;
Tri-Mode controller in PCIe 4.0 expansion slot for connecting NVMe drives. |
| Disk Subsystem | Up to 8 hot-swappable 3.5"/2.5" SAS3/SATA3/NVMe Gen4 (U.2 or U.3) HDD/SSD drives in a cage on the front panel of the server.
Connectors on the basket for connecting cables:
- 2 HD Mini-SAS connectors for 8 SAS3/SATA drives
- 4 SLIMLINE x8 slots for 8 NVMe PCIe 4.0 x4 drives
Storage device connection options:
For SATA and/or SAS drives:
- to SAS RAID controller or HBA with HD Mini-SAS -> HD Mini-SAS cables, up to 8 drives in total, RAID controller or HBA and cables required;
- to the Tri-Mode controller with cables (depending on the controller model) HD Mini-SAS -> HD Mini-SAS or SLIMLINE x8 -> 2 x HD Mini-SAS, up to 8 drives in total, a Tri-Mode controller and cables are required.
For NVMe drives:
- to two PCIe 4.0 x4 ports from CPU#1 with SLIMLINE x8 -> SLIMLINE x8 cable (enabled by default for two drives);
to two PCIe 4.0 x4 ports from CPU#2 with a SLIMLINE x8 -> SLIMLINE x8 cable (when using the front riser card ports,for two drives);
to the Tri-Mode controller or HBA with SLIMLINE x8 -> SLIMLINE x8 cables (an additional cable is required for each pair of drives), for a total of 4 drives. |
| Additional Storage | Up to two M.2 SATA / PCIe 3.0 x4 2280/22110 drives installed on a SAS3408-based expansion card with RAID 0/1 support in a PCIe slot. |
| Optical Storage | Not supported, only external via USB 3.2 Gen1 port. |
| Interfaces | On the front panel: 2 USB 3.2 Gen1 connectors, DB-15 video connector (VGA port), COM port.
On the rear panel: RJ-45 1GbE management port. |
| Video Adapter and GPU | Integrated video controller Aspeed® AST2600 Video Graphic Adapter, 1920x1200@60Hz 32bpp, DDR4 SDRAM
It is possible to install eight additional video cards or GPUs with a power consumption of up to 300 W each. |
| Control Panel | Control buttons: Power, System ID (on the front panel)
Indication: Power LED, ID LED, Message LED, Q-LED (on the front panel), ID LED (on the back panel) |
| Management and Monitoring | Integrated Baseboard Management Controller Aspeed® AST2600, IPMI 2.0 & Redfish
Built-in RJ-45 1GbE remote management port
Fully functional remote control (KVM, Virtual Media over LAN)
ASUS Control Center |
| Supported Operating Systems | Current list |
| Power Unit | 4 x 3000W 80 Plus Titanium PSUs with redundancy and hot swappability
Power subsystem operating modes: 2+2 Redundant Power |
| System Cooling | controlled single-rotor fans 80x80x38 mm with redundancy and hot-swappable capability
1 fan in each power supply
Passive Cooled CPU Heatsinks |
| Dimensions | Height 17.6 cm, width 43.9 cm, depth 79.8 cm |
| Rack Mount Installation | Slide-out rails for rack mounting |
| Power Supply Parameters | 100-240 VAC, 18 A, 50-60 Hz |
| Operating Environment | Operating temperature from +10°C to +35°C (when installing GPU from +10°C to +30°C)
Relative humidity from 8% to 80%
Storage temperature from -40°C to +60°C
Relative humidity during storage from 20% to 90% |
| Warranty | Standard warranty 36 months, 9 x 5, service at the service center |