| Characteristic |
Description |
 | |
| Platform | Server platform ASUS RS700A-E12-RS12U (manufacturer code 90SF02D1-M001A0) |
| Server Board | ASUS Server Board K14PP-D24
One or two AMD EPYC 9004 processors (Genoa/Bergamo), maximum TDP 400W
Interprocessor interface 512 GB/s (64 PCIe 5.0 Lines)
24 slots for installing DDR5-4800 memory modules
12 SATA ports, 4 USB 3.2 Gen1 ports, IPMI
4 PCIe 5.0 slots for installing riser cards, 128 PCIe 5.0 lanes when installing two CPUs
8 PCIe 5.0 x4 ports for connecting NVMe drives (4 Mini Cool Edge IO x8 connectors)
Baseboard Management Controller Aspeed AST2600 |
| Form Factor | 1U, rack mountable |
| Processor | 1 or 2 AMD EPYC 9004 processors with a maximum TDP of 400W each, support for AMD 3D V-Cache Technology
For each processor:
Processor socket Socket SP5 (LGA 6096), AMD Zen 4 (Genoa/Bergamo) architecture, 5 nm process technology
Up to 128 cores, 256 threads, operating frequency up to 4.1 GHz (maximum 4.4 GHz in Boost mode)
Up to 1152 MB L3 cache per CPU, per core: 1024 KB L2, 32 KB (I)+ 32 KB (D) L1
Support for AMD Infinity Guard, AMD Infinity Architecture technologies
128 PCIe 5.0 lanes per CPU, 64 of which are used as interprocessor interface
Supports ECC DDR5-4800 memory, up to 6 TB per CPU (up to 12 TB total), integrated 12-channel memory controller |
| Chipset | System on Chip (SoC) (the chipset is built into the processor) |
| System Memory | Memory types:
- DDR5 ECC Registered Memory (RDIMM) 1.1V, DDR5 ECC Registered Memory 3DS (RDIMM 3DS) 1.1V
Maximum RAM (the processor supports a maximum of 6TB of RAM):
- for RDIMM - 1536 GB (24 x 64 GB)
- for RDIMM 3DS - 3072 GB (24 x 128 GB)
Memory modes: 4800 MT/s (1 DPC)
Integrated 12-channel memory controller (IMC) on the processor
Total 12 channels per CPU, one memory module per channel (1 DPC)
Total 12 memory modules per CPU, 24 memory modules per server
Memory subsystem bandwidth 460.8 GB/s |
| Network Adapters | Integrated network controller Intel Ethernet Controller I350-AT2, 4 ports 1Gb Ethernet RJ-45, connection to CPU1
Dedicated 1 Gb Ethernet RJ-45 management port
Additionally:
- replaceable network module OCP3.0 PCIe 4.0 x16 with installation in the expansion slot of Riser card #1 via an adapter, connection to CPU1;
up to three network adapters in standard PCIe 5.0 expansion slots (up to two when installing a network module) |
| Expansion Slots | Riser Card #1:
- 1 slot (top) PCIe 5.0 x16/x16 full height, full length (Full Height, Full Length), connection toCPU#1
- 1 slot (lower) PCIe 5.0 x16/x16 full height, full length (Full Height, Full Length), connection toCPU#1 (slot for installing OCP 3.0 adapter)
Riser Card #2:
- 1 PCIe 5.0 x16/x16 Low Profile slot, connection toCPU#2 (only works when a second processor is installed)
- 1 PCIe 4.0 x8/x8 low-profile internal slot (Low Profile, Internal), connection toCPU#1, combined with a SLIMLINE x8 connector for SATA drives, designed for installing a SAS controller |
| Disk Subsystem Controller | Integrated into CPU1 SATA controller, 8 ports 6Gb/s (SFF-8654 SLIMLINE x8 connector)
Integrated into CPU2 SATA controller, 8 ports 6Gb/s (SFF-TA-1016 MCIO x8 connector)
4 x PCIe 5.0 x4 ports for NVMe drives from CPU#1 (2 x SFF-TA-1016 MCIO x8 connectors from CPU#1)
8 PCIe 5.0 x4 ports for NVMe drives from CPU#2 (2 GENZPCIE x16 connectors)
Additionally (selection in the Configurator fields "Disk subsystem controller" and "HBA adapter):
- RAID controller, HBA adapter or Tri-Mode controller in the PCIe 5.0 expansion slot for SAS3 and/or SATA drives;
Tri-Mode controller in PCIe 5.0 expansion slot for NVMe drives (alternative connection option). |
| Disk Subsystem | Up to 12 hot-swappable 2.5" SAS3/SATA3/NVMe Gen5 (U.2 or U.3) HDD/SSD drives in a cage on the front panel of the server.
Connectors on the basket for connecting cables:
- 3 SLIMLINE x4 connectors for 12 SAS3/SATA drives
- 6 SFF-TA-1016 MCIO x8 connectors for 12 NVMe PCIe 5.0 x4 drives
Storage device connection options:
For SATA drives:
to the integrated SATA controller CPU1 with cable SLIMLINE x8 -> 2 x SLIMLINE x4 (enabled by default for 8 drives, basket slots 1-8).
- to the integrated SATA controller CPU2 with the cable MCIO x8 -> SLIMLINE x4 (connected by default for 4 drives, basket slots 9-12).
For SATA and/or SAS drives:
to the SAS RAID controller or HBA with HD Mini-SAS -> SLIMLINE x4 cables, up to 12 drives in total, basket slots from 1st to 12th, additional cables required;
to the Tri-Mode controller with cables (depending on the controller model) HD Mini-SAS -> SLIMLINE x4 or SLIMLINE x8 -> 2 x SLIMLINE x4, up to 12 drives in total, basket slots 1 through 12, additional cables required.
For NVMe drives:
- to four PCIe 5.0 x4 CPU1 ports on the motherboard with two MCIO x8 -> MCIO x8 cables (connected by default for four drives, basket slots 1-4);
- to eight PCIe 5.0 x4 CPU2 ports on the motherboard with two cables GENZPCIE x16 -> 2 x MCIO x8 (connected by default for eight drives, basket slots 5-12);
- to Tri-Mode controllers using SLIMLINE x8 -> MCIO x8 cables (alternative connection option, up to 8 drives, an additional cable is required for each pair of drives). |
| Additional Storage | Up to two M.2 SATA/PCIe 4.0 x4 2242/2260/2280 drives installed in motherboard slots (connection to CPU#1).
Up to two M.2 SATA / PCIe 3.0 x4 2280/22110 drives installed on a SAS3408-based expansion card with RAID 0/1 support in a PCIe slot. |
| Optical Storage | Not supported, only external via USB 3.2 Gen1 port. |
| Interfaces | On the front panel: no
On the rear panel: 2 x 10GbE RJ-45 ports, DB-15 video connector (VGA port), RJ-45 1GbE management port, 2 x USB 3.2 Gen1 ports, ID Button with LED |
| Video Adapter and GPU | Integrated video controller Aspeed® AST2600 Video Graphic Adapter, 1920x1200@60Hz 32bpp, DDR4 SDRAM
It is possible to install an additional video card or GPU |
| Control Panel | On the front panel:
- control buttons: Power, Reset, System ID
- indication: Power LED, ID LED, Message LED, Drive activity LED, LAN Activity LED
On the back panel:
- control buttons: Power, System ID
- indication: Power LED, ID LED, Port 80 Q-Code LED. |
| Management and Monitoring | Integrated Baseboard Management Controller Aspeed® AST2600, IPMI 2.0 & Redfish
Built-in RJ-45 1GbE remote management port
Fully functional remote control (KVM, Virtual Media over LAN)
ASUS Control Center |
| Supported Operating Systems | Current list |
| Power Unit | 2 x 2600W 80 Plus Platinum redundant hot-swappable power supplies
Power subsystem operating modes: 1+1 Redundant Power, 2+0 Combined Power |
| System Cooling | 8 controlled dual-rotor fans 40x40x56 mm with redundancy
1 fan in each power supply
Passive Cooled CPU Heatsinks |
| Dimensions | Height 4.4 cm, width 44.9 cm, depth 84.3 cm |
| Rack Mount Installation | Slide-out rails for rack mounting |
| Power Supply Parameters | 100-240 VAC, 10 A, 50-60 Hz |
| Operating Environment | Operating temperature from +10°C to +35°C (when installing GPU from +10°C to +30°C)
Relative humidity from 8% to 80%
Storage temperature from -40°C to +60°C
Relative humidity during storage from 20% to 90% |
| Warranty | Standard warranty 36 months, 9 x 5, service at the service center |