| Characteristic |
Description |
 | |
| Platform | GIGABYTE G292-Z20 Server Platform (rev. A00) |
| Server Board | GIGABYTE Server Board MZ22-G20 Rev. 3.0
One AMD EPYC 7003 (Milan) or 7002 (Rome) processor, max TDP 280W
8 slots for installing DDR4-3200 memory modules
8 SATA ports or 2 PCIe 4.0 x4 ports for NVMe drives, 2 USB 3.0 ports, IPMI
2 x PCIe 4.0 x4 ports for NVMe drives
2 M.2 PCIe 3.0 x2 and x4 slots of 2242/2260/2280/22110 format
Baseboard Management Controller Aspeed AST2500 |
| Form Factor | 2U, rack mountable |
| Processor | 1 x AMD EPYC 7002/7003 processor with max TDP 280W
Processor socket Socket SP3, AMD Zen 2 (Rome) / Zen 3 (Milan) architecture, 7 nm process technology
Up to 64 cores, 128 threads, operating frequency up to 3.7 GHz (maximum 4.1 GHz in Boost mode)
Up to 256MB/768MB L3 cache per CPU, per core: 512KB L2, 64KB (I)+ 32KB (D) L1
Support for Precision Boost technologies, SMT multi-threading
2 x 128-bit FMAC compute units (4 floating point instructions per cycle)
128 PCIe 4.0 lanes per CPU
Supports ECC DDR4-3200 memory, up to 4TB, integrated eight-channel memory controller |
| Chipset | System on Chip (SoC) (the chipset is built into the processor) |
| System Memory | Memory types:
- DDR4 ECC Registered Memory (RDIMM) 1.2V, DDR4 ECC Registered Memory 3DS (RDIMM 3DS) 1.2V
- DDR4 ECC Load Reduced Memory (LRDIMM) 1.2V, DDR4 ECC Load Reduced Memory 3DS (LRDIMM 3DS) 1.2V
Maximum RAM (the processor supports a maximum of 4TB of RAM):
- for RDIMM - 512 GB (8 x 64 GB), for LRDIMM - 1024 GB (8 x 128 GB)
- for RDIMM 3DS - 1024 GB (8 x 128 GB), for LRDIMM 3DS - 2048 GB (8 x 256 GB)
Memory modes: 3200 MT/s
Integrated eight-channel memory controller (IMC) on the processor
Total 8 channels per CPU, one memory module per channel (1 DPC)
Total 8 memory modules per CPU
Memory subsystem bandwidth 204.8 GB/s |
| Network Adapters | Integrated Mellanox ConnectX-4 Lx controller, 2 ports 10Gb Ethernet SFP+
Dedicated 1 Gb Ethernet RJ-45 management port
Additionally:
up to two network adapters in standard PCIe 4.0 expansion slots |
| Expansion Slots | Four riser cards with integrated PCIe lane extender (Microchip PCI Switch) for installing GPU cards:
- 2 internal PCIe 4.0 x16/x16 full height, full length, double width slots
Two riser cards for installing expansion boards:
- 1 PCIe 4.0 x16/x16 Low Profile, Half Length slot |
| Disk Subsystem Controller | Integrated CPU SATA controller, 8 x 6Gb/s ports, 2 x 4-port SFF-8654 SLIMLINE x4 connectors, combined with 2 x PCIe 4.0 x4 ports for NVMe drives.
2 PCIe 4.0 x4 ports for NVMe drives on the motherboard, 2 SFF-8654 SLIMLINE x4 connectors.
1 x M.2 PCIe 4.0 x4 storage slot, 2242/2260/2280/22110 form factor
1 x M.2 PCIe 4.0 x2 storage slot, 2242/2260/2280/22110 form factor
Additionally (selection in the Configurator fields "Disk subsystem controller" and "HBA adapter):
- RAID controller, HBA adapter or Tri-Mode controller for SAS3 and/or SATA drives in PCIe expansion slots.
- Tri-Mode controller for NVMe drives in PCIe expansion slots. |
| Disk Subsystem | Up to 8 hot-swappable 2.5" SAS3/SATA3 HDD/SSD drives in the front panel cage, including up to 2 NVMe drives.
Connectors on the basket for connecting cables:
- 2 SLIMLINE x4 connectors for SATA/SAS3 drives;
- 2 SLIMLINE x4 connectors for NVMe drives.
Storage device connection options:
For SATA drives:
- to the integrated SATA-controller of the CPU with two cables SLIMLINE x4 -> SLIMLINE x4 (connected for 8 drives).
For SATA and/or SAS drives:
- to SAS RAID controller or HBA with HD Mini-SAS -> SLIMLINE x4 cables (up to 8 drives, additional cables required);
- to the Tri-Mode controller via cable 2 x HD Mini-SAS -> 2 x SLIMLINE x4 or SLIMLINE x8 -> 2 x SLIMLINE x4 (depending on the controller model, up to 8 drives, additional cable required).
For NVMe drives:
- to two PCIe 4.0 x4 ports of the motherboard with SLIMLINE x4 -> SLIMLINE x4 cables (enabled by default for two drives);
- to the Tri-Mode controller or HBA with a cable 2 x HD Mini-SAS -> 2 x SLIMLINE x4 or SLIMLINE x8 -> 2 x SLIMLINE x4 (depending on the controller (HBA) model, for 2 drives, an additional cable is required). |
| Additional Storage | Up to two M.2 PCIe 4.0 x4 drives of format 2242/2260/2280/22110 with installation in slots on the motherboard.
Up to two or four M.2 PCIe 3.0 x4 2280/22110 drives installed on an expansion card in a PCIe slot.
Up to two M.2 SATA / PCIe 3.0 x4 2280/22110 drives installed on a SAS3408-based expansion card with RAID 0/1 support in a PCIe slot. |
| Optical Storage | Not supported, only external via USB 3.0 port. |
| Interfaces | On the front panel: no
On the rear panel: DB-15 video connector, RJ-45 1GbE management port, 2 USB 3.0 ports, 2 10GbE SFP+ network ports, ID Button with LED |
| Video Adapter and GPU | Integrated video controller Aspeed? AST2500 Video Graphic Adapter, 1920x1200@60Hz 32bpp, DDR4 SDRAM
It is possible to install up to eight full-size, double-width graphics accelerators with a power consumption of up to 300W each. |
| Control Panel | Control buttons: Power, Reset, System ID, NMI
Indication: Power LED, ID LED, System Status LED, Drive activity LED, LAN 1/2 Activity LED |
| Management and Monitoring | Integrated Baseboard Management Controller Aspeed? AST2500, IPMI 2.0 & Redfish
Built-in RJ-45 1GbE remote management port
Fully functional remote control (KVM, Virtual Media over LAN)
GIGABYTE Management Console
GIGABYTE Server Management (GSM) |
| Supported Operating Systems | Windows Server 2016 (X2APIC/256T not supported)
Windows Server 2019
Windows Server 2022
Red Hat Enterprise Linux 8.3 (x64) or later
Red Hat Enterprise Linux 9.0 (x64) or later
SUSE Linux Enterprise Server 12 SP5 (x64) or later
SUSE Linux Enterprise Server 15 SP2 (x64) or later
Ubuntu 18.04.5 LTS (x64) or later
Ubuntu 20.04 LTS (x64) or later
Ubuntu 22.04 LTS (x64) or later
VMware ESXi 6.7 Update3 P03 or later
VMware ESXi 7.0 Update1 or later
VMware ESXi 8.0 or later
Citrix Hypervisor 8.2.0 or later |
| Power Unit | 2 x 2200W 80 Plus Platinum redundant hot-swappable power supplies
Power subsystem operating modes: 1+1 Redundant Power, 2+0 Combined Power
Supported technologies:
Cold Redundancy - at a power consumption level of up to 40% of the maximum, only one power supply is used, which increases energy efficiency by approximately 10%.
Smart Crises Management and Protection (SCMP) GIGABYTE patented technology for high-load systems. When the power consumption level is more than 50% of the maximum, in the event of a power supply failure, the system switches to a low-power mode to prevent unplanned shutdown.
Smart Ride Through (SmaRT) - a technology that prevents the system from shutting down during a short-term (up to 10-20 ms) power failure by reducing energy consumption (throttling). |
| System Cooling | controlled single-rotor fans 80x80x38 mm with redundancy and hot-swappable capability, 16'300 RPM
1 fan in each power supply
CPU heatsink with passive cooling, low profile. |
| Dimensions | Height 8.75 cm, width 44.8 cm, depth 80.0 cm |
| Rack Mount Installation | Slide-out rails for rack mounting |
| Power Supply Parameters | 100-240 VAC, 12.6 A, 50-60 Hz |
| Operating Environment | Operating temperature from +10?C to +35?C
Relative humidity from 8% to 80%
Storage temperature from -40?C to +60?C
Relative humidity during storage from 20% to 95% |
| Warranty | Standard warranty 36 months, 9 x 5, service at the service center |