| Characteristic |
Description |
 | |
| Platform | GIGABYTE H262-PC0 Server Platform |
| Server Board | GIGABYTE Server Board MH62-HD0 (for each node)
One or two 3rd Generation Intel? Xeon? Scalable processors, maximum TDP 270W
Interprocessor interface 11.2 GT/s (3 links)
16 slots for installing DDR4-3200 memory modules
3 SATA ports, 2 PCIe 4.0 x4 ports for NVMe drives, 2 USB 3.0 ports, COM port, IPMI, Dual BIOS
PCIe 4.0 x16 slots for installing riser cards, 128 PCIe 4.0 lanes when installing two CPUs
slot for installing a LAN or RAID mezzanine module: OCP 2.0 Type1 PCIe 3.0 x8
Baseboard Management Controller Aspeed AST2500
Integrated network adapter: 2 ports 10Gb BASE-T Ethernet based on Intel X710-AT2 |
| Form Factor | 2U, rack mountable |
| Processor | 1 or 2 3rd Generation Intel? Xeon? Scalable Processors (per node)
Maximum Thermal Design Power (TDP) -270W per processor (all Xeon Scalable Gen3 dual-socket processors)
Supported processors: Intel Xeon Silver 4300, Gold 5300, Gold 6300, Platinum 8300, except processors with indexes (H), (L), (U), (Q)
Processor socket Socket-P4 LGA4189, Intel Ice Lake architecture,10nm process technology
From 8 to 40 cores and 80 threads per processor, operating frequency from 2.0 GHz to 3.6 GHz
Up to 160 logical CPUs per server with Intel Hyper-Threading Technology
Up to 60 MB L3 cache per processor (1.5 MB per core), 1.25 MB L2 cache per core, 32 KB + 48 KB L1 cache per core
Maximum amount of RAM supported by the processor6TB
DDR4-2667/2933/3200 MT/s memory support (depending on processor model), 4 dual-channel memory controllers (IMC)
Support for Registered and Load reduced ECC memory, including 3DS
Support for Intel? Optane? Persistent Memory 200 Series (Xeon Gold and Platinum only) in Memory Mode and APP Direct Mode
Interprocessor interface UPI 10.4 (2 links) or 11.2 GT/s (3 links),64 PCIe 4.0 lanes (4GB/s per lane), DMI 3.0 (4 lines) |
| Chipset | Intel C621A Chipset, 20 PCIe 3.0 lanes, 14 SATA ports, 14 USB 2.0, 10 USB 3.0 (for each node) |
| System Memory | Memory types:
- DDR4 ECC Registered Memory (RDIMM) 1.2V, DDR4 ECC Registered Memory 3DS (RDIMM 3DS) 1.2V
- DDR4 ECC Load Reduced Memory (LRDIMM) 1.2V, DDR4 ECC Load Reduced Memory 3DS (LRDIMM 3DS) 1.2V
- Intel? Optane? Persistent Memory 200 Series (PMEM), 128GB, 256GB, 512GB modules
Maximum RAM (the processor supports a maximum of 6TB of RAM),for each node:
- for RDIMM - 1024 GB (16 x 64 GB), for LRDIMM - 2048 GB (16 x 128 GB)
- for RDIMM 3DS -2048 GB (16 x 128 GB), for LRDIMM 3DS - 4096 GB (16 x 256 GB)
- for PMEM - 4096 GB in Memory Mode, 6 TB in APP Direct Mode (8 x 256 GB DDR4 + 8 x 512 GB PMEM)
Memory operating modes: 2666/2933/3200 MT/s (depending on processor model)
4 dual-channel memory controllers (IMC) integrated into the processor
Total 8 channels per CPU, one memory module per channel (1 DPC)
Total 8 memory modules per CPU, 16 memory modules per node
Memory subsystem bandwidth 171/188/205 GB/s (2667/2933/3200 MT/s) per CPU (depending on CPU model) |
| Network Adapters | Integrated network controller Intel Ethernet Controller X710-AT2, 2 ports 10Gb BASE-T Ethernet RJ-45 (for each node)
Dedicated 1 Gb Ethernet RJ-45 management port (for each node)
Common management port (CMC global management port)
Additionally (for each node):
up to two network adapters in standard PCIe 4.0 expansion slots |
| Expansion Slots | For each node:
Riser card #1, connection toCPU#1:
1 PCIe 4.0 x16/x16 low profile, half length slot;
Riser card #2, connection toCPU#1:
1 PCIe 4.0 x16/x16 low profile, half length slot;
PCIe 3.0 x8 OCP 2.0 Type1 slot on motherboard |
| Disk Subsystem Controller | For each node:
Integrated chipset SATA controller, 2 x 6Gb/s ports (SFF-8654 SLIMLINE x4 connector):
- VROC 7.5 RAID 0/1 support
Integrated chipset sSATA controller, 1 x 6Gb/s port (1 x 7-Pin SATA connector with SATA DOM support)
2 PCIe 4.0 x4 ports for connecting NVMe drives (direct connection to server interface card):
- support for Intel VMD 2.0, Intel VROC 7.5 RAID 0/1 (RAID requires Intel VROC Key) |
| Disk Subsystem | Up to 8 hot-swappable 2.5" SATA3/NVMe Gen4 HDD/SSD drives in a cage on the front panel of the server:
- 2 SATA and/or NVMe drivesfor each node.
Connecting storage devices (for each node):
For SATA drives:
to the integrated SATA controller of the motherboard via the chassis interface board (connected for 2 drives)
For NVMe drives:
- to two PCIe 4.0 x4 portsCPU#2 via the chassis interface board (enabled by default for 2 drives);
Using NVMe drives is only possible for dual-processor node configurations! |
| Additional Storage | For each node:
One internal SATA DOM drive installed in the 7-Pin SATA connector of the integrated sSATA controller on the motherboard.
Up to two or four M.2 PCIe 3.0 x4 2280/22110 drives installed on an expansion card in a PCIe slot.
Up to two M.2 SATA / PCIe 3.0 x4 2280/22110 drives installed on a SAS3408-based expansion card with RAID 0/1 support in a PCIe slot. |
| Optical Storage | Not supported, only external via USB 3.0 port. |
| Interfaces | For each node:
On the front panel: no
On the rear panel: DB-15 video connector, RJ-45 1GbE management port, 2 USB 3.0 ports, 2 10GbE RJ-45 network ports, ID LED
Internal ports: Serial Port, VROC key slot |
| Video Adapter and GPU | For each node:
Integrated video controller Aspeed? AST2500 Video Graphic Adapter, 1920x1200@60Hz 32bpp, DDR4 SDRAM
It is possible to install an additional video card |
| Control Panel | For each node (on the front panel):
Control buttons: Power, Reset, System ID
Indication: Power LED, ID LED, System Status LED |
| Management and Monitoring | For each node:
Integrated Baseboard Management Controller Aspeed? AST2500, IPMI 2.0 & Redfish
Built-in RJ-45 1GbE remote management port
Fully functional remote control (KVM, Virtual Media over LAN)
GIGABYTE Management Console
GIGABYTE Server Management (GSM)
Each node can be accessed via the CMC global management port |
| Supported Operating Systems | Windows Server 2016
Windows Server 2019
Windows Server 2022
Red Hat Enterprise Linux 7.9 (x64) or later
Red Hat Enterprise Linux 8.2 (x64) or later
Red Hat Enterprise Linux 9.0 (x64) or later
SUSE Linux Enterprise Server 12 SP5 (x64) or later
SUSE Linux Enterprise Server 15 SP2 (x64) or later
Ubuntu 20.04 LTS (x64) or later
Ubuntu 22.04 LTS (x64) or later
VMware ESXi 6.7 Update3 P03 or later
VMware ESXi 7.0 Update2 or later
VMware ESXi 8.0 or later
Citrix Hypervisor 8.2.0 or later |
| Power Unit | 2 x 2200W 80 Plus Platinum redundant hot-swappable power supplies
Power subsystem operating modes: 1+1 Redundant Power, 2+0 Combined Power
Supported technologies:
Cold Redundancy - at a power consumption level of up to 40% of the maximum, only one power supply is used, which increases energy efficiency by approximately 10%.
Smart Crises Management and Protection (SCMP) GIGABYTE patented technology for high-load systems. When the power consumption level is more than 50% of the maximum, in the event of a power supply failure, the system switches to a low-power mode to prevent unplanned shutdown.
Smart Ride Through (SmaRT) - a technology that prevents the system from shutting down during a short-term (up to 10-20 ms) power failure by reducing energy consumption (throttling). |
| System Cooling | controlled single-rotor fans 80x80x38 mm with redundancy and hot-swappable capability, 16'300 RPM
1 fan in each power supply
Passive Cooled CPU Heatsinks |
| Dimensions | Height 8.75 cm, width 44.0 cm, depth 84.0 cm |
| Rack Mount Installation | Slide-out rails for rack mounting |
| Power Supply Parameters | 100-240 VAC, 14-12.6 A, 50-60 Hz |
| Operating Environment | Operating temperature from +10?C to +35?C
Relative humidity from 8% to 80%
Storage temperature from -40?C to +60?C
Relative humidity during storage from 20% to 95% |
| Warranty | Standard warranty 36 months, 9 x 5, service at the service center |