| Characteristic |
Description |
 | |
| Platform | GIGABYTE R133-X10-AAA2 Server Platform |
| Server Board | GIGABYTE Server Board MX14-BL1
1 processor of the Intel Xeon E-2400 family with TDP up to 95W
4 slots for installing DDR5-4400 memory modules
8 SATA ports, 4 USB 3.2 Gen1 ports, IPMI
PCIe slots for riser cards, 16 PCIe 5.0 lanes from the CPU, 4 PCIe 4.0 lanes from the CPU, 4 PCIe 4.0 lanes from the chipset
Baseboard Management Controller Aspeed AST2600 |
| Form Factor | 1U, rack mountable |
| Processor | 1 Intel Xeon family processorE-2400 with TDP up to 95W or Intel Pentium 12th generation
Processor socket V0 (FCLGA-1700), Intel Raptor Lake architecture, 10nm process technology
Supports DDR5-4800 ECC-Unbuffered Memory (2 channels), maximum RAM capacity 128 GB
4, 6 or 8 physical cores, 12MB, 16MB or 24MB Intel Smart Cache
Support for Intel Turbo Boost, Intel Hyper-Threading technologies (not all processor models)
Power consumption 65-95W (depending on the processor model)
Without integrated graphics
16 PCIe 5.0 lanes, 4 PCIe 4.0 lanes, 8 DMI4 lanes |
| Chipset | Intel C262 Chipset, 8 SATA ports, 20 PCIe 4.0 lanes, 8 PCIe 3.0 lanes, 8 DMI4 lanes |
| System Memory | DDR5-4800 ECC Unbuffered (UDIMM), dual-channel memory controller
Maximum capacity 128GB (4 x 32GB UDIMM), 4 DIMM slots, 2 slots per channel
Supported memory operating modes 4400 MT/s (1DPC), 4000/3600 MT/s (2DPC, depending on memory type (SR/DR)
Memory subsystem bandwidth 70.4 Gb/s |
| Network Adapters | Integrated network controller, 2 ports 1Gb Ethernet RJ-45
based on Intel i210AT Dual Port Gigabit Ethernet Controller
Dedicated 1GbE RJ-45 management port
It is possible to install additional network adapters in PCIe 5.0/4.0 expansion slots (see the corresponding field in the Configurator) |
| Expansion Slots | Riser Card #1:
1 PCIe 5.0 x16/x16 Full Height, Full Length slot, CPU connection, occupied by 2-port PCIe 4.0 x4 NVMe HBA adapter for NVMe drives (the second slot is disabled)
or
- 2 PCIe 5.0 x8/x16 Full Height, Full Length slots, CPU connection (option without NVMe HBA adapter support in the first slot)
Riser Card #2:
- 1 PCIe 4.0 x4/x16 Full Height, Half Length slot, chipset connection |
| Disk Subsystem Controller | Integrated chipset SATA controller, 8 6Gb/s ports (2 4-port SFF-8654 SLIMLINE x4 connectors):
- support RSTe RAID 0/1/10/5
2 x PCIe 4.0 x4 ports for connecting NVMe drives via HBA adapter (upper riser card slot #1, 2 x SFF-8654 SLIMLINE x4 connectorsLP from CPU)
- Intel VMD technology is not supported in this processor family
Additionally (selection in the Configurator fields "Disk subsystem controller" and "HBA adapter):
- RAID controller, HBA adapter or Tri-Mode controller for SAS3 and/or SATA drives in a PCIe 5.0 expansion slot;
- Tri-Mode controller for an alternative option for connecting NVMe drives to the PCIe 5.0 expansion slot. |
| Disk Subsystem | Up to 4 hot-swappable 3.5"/2.5" SAS3/SATA3/NVMe Gen4 U.2/U.3 HDD/SSD drives in the front panel cage of the server.
Connectors on the basket for connecting cables:
- 4 7-Pin SATA connectors for SAS3/SATA drives;
4 SLIMLINE x4 connectors for NVMe PCIe 4.0 x4 drives (U.2 or U.3)
Storage device connection options:
For SATA drives:
- to the integrated SATA controller of the motherboard with the SLIMLINE x4 -> 4 x 7-Pin SATA with Side-Band cable (enabled by default for four drives).
For SATA and/or SAS drives:
- to SAS RAID controller or HBA with HD Mini-SAS -> 4 x 7-Pin SATA w/SB cable (additional cable required);
- to the Tri-Mode controller using the HD Mini-SAS -> 4 x 7-Pin SATA w/SB or SLIMLINE x8 -> 4 x 7-Pin SATA cable (depending on the controller model, an additional cable is required).
For NVMe drives:
- to two PCIe 4.0 x4 ports of the HBA adapter with two SLIMLINE x4 cablesLP -> SLIMLINE x4 (connected by default for two drives, the second slot of the riser card #1 is not working);
to the Tri-Mode controller using cables 2 x HD Mini-SAS -> 2 x SLIMLINE x4 or SLIMLINE x8 -> 2 x SLIMLINE x4 (depending on the controller model, an additional cable is required for each pair of drives). |
| Additional Storage | Up to two M.2 PCIe 3.0 x4 2280/22110 drives installed on an expansion card in a PCIe slot.
Up to two M.2 SATA or PCIe 4.0 x4 2280/22110 drives installed on a SAS3808-based expansion card with RAID 0/1 support in a PCIe slot.
One M.2 PCIe 4.0 x4 2280/22110 drive in a slot on the motherboard, connected to the CPU |
| Optical Storage | Not supported, only external via USB 3.2 port. |
| Interfaces | Front panel: 2 USB 3.2 Gen1 ports
On the rear panel: Mini-DP video connector (D-Sub adapter included), RJ-45 1GbE management port, 2 1GbE RJ-45 network ports, 2 USB 3.2 Gen1 ports |
| Video Adapter and GPU | Integrated video controller Aspeed? AST2600 Video Graphic Adapter, 1920x1200@60Hz 32bpp, DDR4 SDRAM
It is possible to install a full-size, double-width graphics accelerator. |
| Control Panel | On the front panel:
- control buttons: Power, Reset, System ID, NMI
indication: Power LED, ID LED, System Status LED, Drive activity LED, LAN Activity LED
On the back panel:
- control buttons: System ID
- indication: ID LED |
| Management and Monitoring | Integrated Baseboard Management Controller Aspeed? AST2600, IPMI 2.0 & Redfish
Built-in RJ-45 1GbE remote management port
Fully functional remote control (KVM, Virtual Media over LAN)
GIGABYTE Management Console
GIGABYTE Server Management (GSM) |
| Supported Operating Systems | Current list |
| Power Unit | x 550W 80 Plus Platinum redundant hot-swappable power supplies
Power subsystem operating modes: 1+1 Redundant Power, 2+0 Combined Power
Supported technologies:
Cold Redundancy - at a power consumption level of up to 40% of the maximum, only one power supply is used, which increases energy efficiency by approximately 10%.
Smart Crises Management and Protection (SCMP) GIGABYTE patented technology for high-load systems. When the power consumption level is more than 50% of the maximum, in the event of a power supply failure, the system switches to a low-power mode to prevent unplanned shutdown.
Smart Ride Through (SmaRT) - a technology that prevents the system from shutting down during a short-term (up to 10-20 ms) power failure by reducing energy consumption (throttling). |
| System Cooling | x 40x40x56mm dual-rotor fans with redundancy and hot-swappable capability, 29'700 RPM
2 x 40x40x28mm hot-swappable, redundant, single-rotor fans, 32,000 RPM
1 fan in each power supply
CPU radiator with passive cooling |
| Dimensions | Height 4.35 cm, width 43.8 cm, depth 71.0 cm |
| Rack Mount Installation | Slide-out rails for rack mounting |
| Power Supply Parameters | 100-240 VAC, 10-4 A, 50-60 Hz |
| Operating Environment | Operating temperature from +10?C to +35?C
Relative humidity from 8% to 80%
Storage temperature from -40?C to +60?C
Relative humidity during storage from 20% to 95% |
| Warranty | Standard warranty 36 months, 9 x 5, service at the service center |