| Characteristic |
Description |
 | |
| Platform | GIGABYTE R152-Z30 Server Platform (rev. A00) |
| Server Board | GIGABYTE Server Board MZ32-AR0
One AMD EPYC 7003 (Milan) or 7002 (Rome) processor, max TDP 225W, cTDP 240W
2 x M.2 PCIe 3.0 x4 2242/2260/2280
16 slots for installing DDR4-3200 memory modules
8 SATA ports, 5 USB 3.0 ports, 2 COM ports, IPMI
1 x PCIe 4.0 x16 riser card slot, 128 PCIe 4.0 lanes
1 slot for installing a LAN or RAID mezzanine module, OCP 2.0 PCIe 3.0 x16 (Type1, P1, P2, P3, P4)
Baseboard Management Controller Aspeed AST2500 |
| Form Factor | 1U, rack mountable |
| Processor | 1 x AMD EPYC 7002/7003 processor with max TDP 240W/280W
Processor socket Socket SP3, AMD Zen 2 (Rome) / Zen 3 (Milan) architecture, 7 nm process technology
Up to 64 cores, 128 threads, operating frequency up to 3.7 GHz (maximum 4.1 GHz in Boost mode)
Up to 256MB L3 cache per CPU, per core: 512KB L2, 64KB (I)+ 32KB (D) L1
Support for Precision Boost technologies, SMT multi-threading
2 x 128-bit FMAC compute units (4 floating point instructions per cycle)
128 PCIe 4.0 lanes per CPU
Supports ECC DDR4-3200 memory, up to 4TB per CPU, integrated eight-channel memory controller |
| Chipset | System on Chip (SoC) (the chipset is built into the processor) |
| System Memory | Memory types:
- DDR4 ECC Registered Memory (RDIMM) 1.2V, DDR4 ECC Registered Memory 3DS (RDIMM 3DS) 1.2V
- DDR4 ECC Load Reduced Memory (LRDIMM) 1.2V, DDR4 ECC Load Reduced Memory 3DS (LRDIMM 3DS) 1.2V
Maximum RAM (the processor supports a maximum of 4TB of RAM):
- for RDIMM - 1024 GB (16 x 64 GB), for LRDIMM - 2048 GB (16 x 128 GB)
- for RDIMM 3DS - 2048 GB (16 x 128 GB), for LRDIMM 3DS - 4096 GB (16 x 256 GB)
Memory modes: 3200 MT/s (1 DPC) | 2933, 3200* MT/s (2 DPC), depending on the number of memory modules per channel (DPC)
Integrated eight-channel memory controller (IMC) on the processor
Total 8 channels per CPU, two memory modules per channel (2 DPC)
Total 16 memory modules per CPU
Memory subsystem bandwidth from 85.3 GB/s to 204.8 GB/s depending on the processor model
* with appropriate BIOS settings |
| Network Adapters | Integrated network controller Intel Ethernet Controller I350-AM2, 2 ports 1Gb Ethernet RJ-45
Dedicated 1 Gb Ethernet RJ-45 management port
Additionally:
- replaceable network module with installation in a slot on the OCP 2.0 PCIe 3.0 x16 motherboard;
- network adapter in standard PCIe 4.0 x16 expansion slot |
| Expansion Slots | Riser Card #1:
1 x PCIe 4.0 x16/x16 Full Height, Half Length
PCIe 3.0 x16 OCP 2.0 (Type1, P1, P2, P3, P4) slot on the motherboard for installing a network module or SAS module |
| Disk Subsystem Controller | Integrated CPU SATA controller, 8 6Gb/s ports (2 4-port SFF-8654 SLIMLINE x4 connectors).
Additionally (selection in the Configurator fields "Disk subsystem controller" and "HBA adapter):
- GIGABYTE SAS module for SAS3 and/or SATA drives to the OCP2.0 PCIe3.0 x16 slot on the motherboard;
- RAID controller, HBA adapter or Tri-Mode controller for SAS3 and/or SATA drives in a PCIe 4.0 expansion slot |
| Disk Subsystem | Up to 4 hot-swappable 3.5"/2.5" SAS3/SATA3 HDD/SSD drives in a cage on the front panel of the server.
Cable tray connectors: 4 x 7-Pin SATA connectors for SAS3/SATA drives.
Storage device connection options:
For SATA drives:
to the integrated SATA-controller of the CPU with the SLIMLINE x4 -> 4 x 7-Pin SATA cable (4 drives are connected by default).
For SATA and/or SAS drives:
- to the GIGABYTE SAS RAID module with a SLIMLINE x4 -> 4 x 7-Pin SATA cable (you can use the existing cable);
- to SAS RAID controller or HBA with HD Mini-SAS -> 4 x 7-Pin SATA cable (additional cable required);
to the Tri-Mode controller using the HD Mini-SAS -> 4 x 7-Pin SATA or SLIMLINE x8 -> 4 x 7-Pin SATA cable (depending on the controller model, an additional cable is required).
1x 2.5" SATA3 SSD fixed mount drive in internal cage.
Drive connection options:
For SATA drive:
to the integrated SATA controller of the CPU with the SLIMLINE x4 -> 4 x 7-Pin SATA cable (additional cable required);
- to the GIGABYTE SAS RAID module with a SLIMLINE x4 -> 4 x 7-Pin SATA cable (additional cable required);
- to SAS RAID controller or HBA with HD Mini-SAS -> 4 x 7-Pin SATA cable (additional cable required);
to the Tri-Mode controller using the HD Mini-SAS -> 4 x 7-Pin SATA or SLIMLINE x8 -> 4 x 7-Pin SATA cable (depending on the controller model, an additional cable is required). |
| Additional Storage | up to two M.2 PCIe 3.0 x4 drives of 2242/2260/2280 format installed in a slot on the motherboard.
Up to two or four M.2 PCIe 3.0 x4 2280/22110 drives installed on an expansion card in a PCIe slot.
Up to two M.2 SATA or PCIe 3.0 x4 2280/22110 drives installed on a SAS3408-based expansion card with RAID 0/1 support in a PCIe slot. |
| Optical Storage | Optional (instead of an additional storage device with a fixed installation of a 2.5" SATA3 SSD in the internal cage). |
| Interfaces | Front panel: 2 USB 3.0 ports
On the rear panel: DB-15 video connector, RJ-45 1GbE control port, 3 USB 3.0 ports, 2 1GbE RJ-45 network ports, COM port, ID Button with LED
Internal ports: Serial Port |
| Video Adapter and GPU | Integrated video controller Aspeed? AST2500 Video Graphic Adapter, 1920x1200@60Hz 32bpp, DDR4 SDRAM
It is possible to install one graphics accelerator or an additional video card. |
| Control Panel | Control buttons: Power, Reset, System ID, NMI
Indication: Power LED, ID LED, System Status LED, Drive activity LED, LAN 1/2 Activity LED |
| Management and Monitoring | Integrated Baseboard Management Controller Aspeed? AST2500, IPMI 2.0 & Redfish
Built-in RJ-45 1GbE remote management port
Fully functional remote control (KVM, Virtual Media over LAN)
GIGABYTE Management Console
GIGABYTE Server Management (GSM) |
| Supported Operating Systems | Windows Server 2016 (X2APIC/256T not supported)
Windows Server 2019
Windows Server 2022
Red Hat Enterprise Linux 8.3 (x64) or later
Red Hat Enterprise Linux 9 (x64) or later
SUSE Linux Enterprise Server 12 SP5 (x64) or later
SUSE Linux Enterprise Server 15 SP2 (x64) or later
Ubuntu 18.04.5 LTS (x64) or later
Ubuntu 20.04 LTS (x64) or later
Ubuntu 22.04 LTS (x64) or later
VMware ESXi 6.7 Update3 P03 or later
VMware ESXi 7.0 Update1 or later
Citrix Hypervisor 8.2.0 or later |
| Power Unit | 2 x 650W 80 Plus Platinum PSUs with redundancy and hot swappability
Power subsystem operating modes: 1+1 Redundant Power, 2+0 Combined Power |
| System Cooling | 5 controlled dual-rotor fans 40x40x56 mm with redundancy and hot-swappable capability, 25'000 RPM
1 fan in each power supply
CPU heatsink with passive cooling, low profile. |
| Dimensions | Height 4.35 cm, width 43.8 cm, depth 66.0 cm |
| Rack Mount Installation | Slide-out rails for rack mounting |
| Power Supply Parameters | 100-240 VAC, 10 -5 A, 50-60 Hz |
| Operating Environment | Operating temperature from +10?C to +35?C
Relative humidity from 8% to 80%
Storage temperature from -40?C to +60?C
Relative humidity during storage from 20% to 95% |
| Warranty | Standard warranty 36 months, 9 x 5, service at the service center |