| Characteristic |
Description |
 | |
| Platform | GIGABYTE R161-340 Server Platform |
| Server Board | GIGABYTE Server Board MR51-CE0
One or two 2nd Generation Intel? Xeon? Scalable processors, maximum TDP 125W
Interprocessor interface 10.4 GT/s (2 links)
16 slots for installing DDR4-2933 memory modules
14 SATA ports, 4 USB 3.0 ports, COM port, IPMI
2 PCIe 3.0 x24 slots and 1 PCIe 3.0 x16 slot for installing riser cards, 96 PCIe 3.0 lanes when installing two CPUs
Baseboard Management Controller Aspeed AST2500 |
| Form Factor | 1U, rack mountable |
| Processor | 1 or 2 2nd Generation Intel? Xeon? Scalable Processors
Maximum Thermal Design Power (TDP) -125W on the processor
Supported processors: Intel Xeon Bronze 3000, Silver 4000, Gold 5000, Gold 6000, Platinum 8000
Processor socket FCLGA3647 (Socket P), Intel Skylake (Gen1) / Cascade Lake (Gen2) architecture, 14nm process technology
Supports DDR4-2133/2400/2666/2933 Registered and Load reduced ECC memory, including 3DS
Up to 28 cores and 56 threads per processor, up to 38.5MB L3 cache per processor
Support for Intel Hyper-Threading, Intel Turbo Boost, Intel AVX-512 technologies
Support for processors with integrated Intel Omni-Path HFI 100 Gb/s network ports
Up to 112 logical CPUs per server with Intel Hyper-Threading Technology
Maximum amount of RAM supported by the processor:
- for Xeon Scalable Gen1: 768GB for all models
- for Xeon Scalable Gen2: 4.5TB for models with the "L" index, 1TB for all other models.
Interprocessor interface UPI 10.4 (2 links), 48 PCIe 3.0 lanes (2GB/s per lane), DMI 3.0 (4 lanes) |
| Chipset | Intel C621 Chipset |
| System Memory | Memory types:
- DDR4 ECC Registered Memory (RDIMM) 1.2V, DDR4 ECC Registered Memory 3DS (RDIMM 3DS) 1.2V
- DDR4 ECC Load Reduced Memory (LRDIMM) 1.2V, DDR4 ECC Load Reduced Memory 3DS (LRDIMM 3DS) 1.2V
Maximum RAM:
- for RDIMM - 1024 GB (16 x 64 GB), for LRDIMM - 2048 GB (16 x 128 GB)
for RDIMM 3DS - 2048 GB (16 x 128 GB), for LRDIMM 3DS - 2048 GB (16 x 128 GB)
Memory operating modes: 2133/2400/2666/2933 MT/s (depending on processor model)
Two integrated triple-channel memory controllers (IMC) on each processor
Total 6 channels per CPU, one (1 DPC) or two memory modules per channel (2 DPC, for channels A and D only)
Total 8 memory modules per CPU, 16 memory modules per server
Memory subsystem bandwidth 102/115/128/141 GB/s (2133/2400/2667/2933 MT/s) per CPU |
| Network Adapters | Integrated network controller Intel Ethernet Controller I210-AT, 2 ports 1Gb Ethernet RJ-45
Dedicated 1 Gb Ethernet RJ-45 management port
Additionally:
- up to two network adapters in standard PCIe 3.0 expansion slots |
| Expansion Slots | Riser Card #1:
1 x PCIe 3.0 x16/x16 Full Height, Half Length slot, connects toCPU#1
Riser Card #2:
- 1 x PCIe 3.0 x16/x16 Full Height, Half Length slot, connects toCPU#2
(Only works when a second processor is installed!) |
| Disk Subsystem Controller | Integrated chipset SATA controller, 8 6Gb/s ports (2 4-port SFF-8654 SLIMLINE x4 connectors):
- support VROC 7.5 RAID 0/1/10/5
Integrated chipset sSATA controller, 6 ports 6Gb/s (1 4-port SFF-8654 SLIMLINE x4 connector, 2 7-Pin SATA connectors with SATA DOM support):
- support VROC 7.5 RAID 0/1/10/5
2 x PCIe 3.0 x4 ports for connecting NVMe drives (2 x SFF-8654 SLIMLINE x4 connectors from CPU#2)
- support for Intel VMD, Intel VROC 7.5 RAID 0/1/10/5 (RAID requires Intel VROC Key)
Additionally (selection in the Configurator fields "Disk subsystem controller" and "HBA adapter):
- RAID controller, HBA adapter or Tri-Mode controller for SAS3 and/or SATA drives in PCIe 3.0 expansion slots; |
| Disk Subsystem | Up to 4 hot-swappable 3.5"/2.5" SAS3/SATA3 HDD/SSD drives in a cage on the front panel of the server.
Cable tray connectors: 4 x 7-Pin SATA connectors for SAS3/SATA drives.
Storage device connection options:
For SATA drives:
- to the integrated SATA controller of the motherboard with a SLIMLINE x4 -> 4 x 7-Pin SATA cable (enabled by default).
For SATA and/or SAS drives:
- to SAS RAID controller or HBA with HD Mini-SAS -> 4 x 7-Pin SATA cable;
- to the Tri-Mode controller using the HD Mini-SAS -> 4 x 7-Pin SATA or SLIMLINE x8 -> 4 x 7-Pin SATA cable (depending on the controller model).
One drive with fixed installation of 2.5" SATA3 SSD in the internal cage.
Drive connection options:
- to the 7-Pin SATA connector of the integrated motherboard controller (additional cable required)
- to SAS RAID controller or HBA with HD Mini-SAS -> 4 x 7-PIN SATA cable (additional cable required)
to the Tri-Mode controller using the HD Mini-SAS -> 4 x 7-Pin SATA or SLIMLINE x8 -> 4 x 7-Pin SATA cable (depending on the controller model, an additional cable is required). |
| Additional Storage | Up to two internal SATA DOM drives installed in the 7-Pin SATA connectors of the integrated sSATA controller on the motherboard.
Support Boot RAID 0/1, Intel VROC 7.5
Up to two or four M.2 PCIe 3.0 x4 2280/22110 drives installed on an expansion card in a PCIe slot.
Up to two M.2 SATA / PCIe 3.0 x4 2280/22110 drives installed on a SAS3408-based expansion card with RAID 0/1 support in a PCIe slot.
Up to two M.2 PCIe 3.0 x4 2260/2280 drives installed in slots on the motherboard. |
| Optical Storage | Optional, installation kit required |
| Interfaces | Front panel: 2 USB 3.0 ports
On the rear panel: DB-15 video connector, RJ-45 1GbE management port, 2 USB 3.0 ports, 2 1GbE RJ-45 network ports, ID Button with LED
Internal ports: Serial Port |
| Video Adapter and GPU | Integrated video controller Aspeed? AST2500 Video Graphic Adapter, 1920x1200@60Hz 32bpp, DDR4 SDRAM
It is possible to install an additional video card |
| Control Panel | Control buttons: Power, Reset, System ID, NMI
Indication: Power LED, ID LED, System Status LED, Drive activity LED, LAN 1/2 Activity LEDs |
| Management and Monitoring | Integrated Baseboard Management Controller Aspeed? AST2500, IPMI 2.0 & Redfish
Built-in RJ-45 1GbE remote management port
Fully functional remote control (KVM, Virtual Media over LAN)
GIGABYTE Management Console
GIGABYTE Server Management (GSM) |
| Supported Operating Systems | Windows Server 2012 R2 with Update
Windows Server 2016
Windows Server 2019
Red Hat Enterprise Linux 7.6 (x64) or later
Red Hat Enterprise Linux 8.0 (x64) or later
SUSE Linux Enterprise Server 12.3 (x64) or later
SUSE Linux Enterprise Server 15 (x64) or later
Ubuntu 18.04 LTS (x64) or later
Ubuntu 20.04 LTS (x64) or later
VMware ESXi 6.0 Update3 or later
VMware ESXi 6.5 Update2 or later
VMware ESXi 6.7 Update1 or later
VMware ESXi 7.0 or later
Citrix Xenserver 7.1.0 CU2 or later
Citrix Xenserver 7.5.0 or later
Citrix Hypervisor 8.0.0 or later |
| Power Unit | x 550W 80 Plus Platinum redundant hot-swappable power supplies |
| System Cooling | 7 controlled single-rotor fans 40x40x28 mm with redundancy and hot-swappable capability, 18'000 RPM
1 fan in the power supply
Passive Cooled CPU Heatsinks |
| Dimensions | Height 4.35 cm, width 43.8 cm, depth 73.0 cm |
| Rack Mount Installation | Slide-out rails for rack mounting |
| Power Supply Parameters | 100-240 VAC, 8-4 A, 50-60 Hz |
| Operating Environment | Operating temperature from +10?C to +35?C
Relative humidity from 8% to 80%
Storage temperature from -40?C to +60?C
Relative humidity during storage from 20% to 95% |
| Warranty | Standard warranty 36 months, 9 x 5, service at the service center |