| Characteristic |
Description |
 | |
| Platform | GIGABYTE R162-Z11 Server Platform (rev. A00) |
| Server Board | GIGABYTE Server Board MZ12-HD2 Rev. 3.0
One AMD EPYC 7003 (Milan) or 7002 (Rome) processor, max TDP 225W, cTDP 240W
1 slot M.2 PCIe 4.0 x4 2242/2260/2280/22110
8 slots for installing DDR4-3200 memory modules
6 SATA ports, 3 USB 3.0 ports, IPMI
2 PCIe 3.0 x16 slots and 1 PCIe 4.0 x16 slot for riser cards, 128 PCIe 4.0 lanes
1 slot for installing a LAN or RAID mezzanine module, OCP 2.0 PCIe 3.0 x16 (Type1, P1, P2, P3, P4)
Baseboard Management Controller Aspeed AST2500 |
| Form Factor | 1U, rack mountable |
| Processor | 1 x AMD EPYC 7002/7003 processor with max TDP 240W/280W
Processor socket Socket SP3, AMD Zen 2 (Rome) / Zen 3 (Milan) architecture, 7 nm process technology
Up to 64 cores, 128 threads, operating frequency up to 3.7 GHz (maximum 4.1 GHz in Boost mode)
Up to 256MB L3 cache per CPU, per core: 512KB L2, 64KB (I)+ 32KB (D) L1
Support for Precision Boost technologies, SMT multi-threading
2 x 128-bit FMAC compute units (4 floating point instructions per cycle)
128 PCIe 4.0 lanes per CPU
Supports ECC DDR4-3200 memory, up to 4TB per CPU, integrated eight-channel memory controller |
| Chipset | System on Chip (SoC) (the chipset is built into the processor) |
| System Memory | Memory types:
- DDR4 ECC Registered Memory (RDIMM) 1.2V, DDR4 ECC Registered Memory 3DS (RDIMM 3DS) 1.2V
- DDR4 ECC Load Reduced Memory (LRDIMM) 1.2V, DDR4 ECC Load Reduced Memory 3DS (LRDIMM 3DS) 1.2V
Maximum RAM (the processor supports a maximum of 4TB of RAM):
- for RDIMM - 512 GB (8 x 64 GB), for LRDIMM - 1024 GB (8 x 128 GB)
- for RDIMM 3DS - 1024 GB (8 x 128 GB), for LRDIMM 3DS - 2048 GB (8 x 256 GB)
Memory modes: 3200 MT/s
Integrated eight-channel memory controller (IMC) on the processor
Total 8 channels per CPU, one memory module per channel (1 DPC)
Total 8 memory modules per CPU
Memory subsystem bandwidth from 85.3 GB/s to 204.8 GB/s depending on the processor model |
| Network Adapters | Integrated network controller Intel Ethernet Controller I350-AM2, 2 ports 1Gb Ethernet RJ-45
Dedicated 1 Gb Ethernet RJ-45 management port
Additionally:
- replaceable network module with installation in a slot on the OCP 2.0 PCIe 3.0 x16 motherboard;
- up to three network adapters in standard PCIe x16 expansion slots |
| Expansion Slots | Riser Card #1:
- 1 PCIe 4.0 x16/x16 Low Profile, Half Length slot
Riser Card #2:
2 PCIe 3.0 x16/x16 Low Profile, Half Length slots
PCIe 3.0 x16 OCP 2.0 (Type1, P1, P2, P3, P4) slot on motherboard |
| Disk Subsystem Controller | Integrated CPU SATA controller, 6 ports 6Gb/s (1 SFF-8654 SLIMLINE x4 connector);
PCIe 3.0 x4 ports for NVMe drives from CPU via additional riser card (2 SFF-8654 SLIMLINE x8 connectors).
Additionally (selection in the Configurator fields "Disk subsystem controller" and "HBA adapter):
RAID controller, HBA adapter or Tri-Mode controller for SAS3/SATA/NVMe drives in PCIe expansion slots |
| Disk Subsystem | Up to 10 hot-swappable 2.5" SAS3/SATA3 HDD/SSD drives in the front panel cage, including up to 4 U.2 NVMe Gen3 (PCIe 3.0 x4) drives
Cable tray connectors: 3 SLIMLINE x4 connectors for SATA/SAS3 drives, 10 SLIMLINE x4 connectors for NVMe PCIe 3.0 x4 drives.
Storage device connection options:
For NVMe drives:
- to 4 PCIe 3.0 x4 CPU ports via riser card connectors with SLIMLINE x8 -> 2 x SLIMLINE x4 cables (connected for 4 drives);
- to the Tri-Mode controller using cables 2 x HD Mini-SAS -> 2 x SLIMLINE x4 or SLIMLINE x8 -> 2 x SLIMLINE x4 (depending on the controller model, up to 4 drives, alternative connection option, additional cables required).
For SATA drives:
- to the integrated SATA-controller of the CPU with cables SLIMLINE x4 -> SLIMLINE x4/x2 (connected for 6 drives).
For SATA and/or SAS drives:
- to SAS RAID controller or HBA with HD Mini-SAS -> SLIMLINE x4 cables (up to 10 drives, additional cables required);
- to the Tri-Mode controller with cables 2 x HD Mini-SAS -> 2 x SLIMLINE x4 or SLIMLINE x8 -> 2 x SLIMLINE x4 (depending on the controller model, up to 10 drives, additional cables required). |
| Additional Storage | One M.2 PCIe 4.0 x4 drive of format 2242/2260/2280/22110 installed in a slot on the motherboard.
Up to two or four M.2 PCIe 3.0 x4 2280/22110 drives installed on an expansion card in a PCIe slot.
Up to two M.2 SATA or PCIe 3.0 x4 2280/22110 drives installed on a SAS3408-based expansion card with RAID 0/1 support in a PCIe slot. |
| Optical Storage | Not supported, only external via USB 3.0 port. |
| Interfaces | Front panel: 1 USB 3.0 connector
On the rear panel: DB-15 video connector, RJ-45 1GbE management port, 2 USB 3.0 ports, 2 1GbE RJ-45 network ports
Internal ports: 1 x M.2 PCIe 3.0 x4 storage slot |
| Video Adapter and GPU | Integrated video controller Aspeed? AST2500 Video Graphic Adapter, 1920x1200@60Hz 32bpp, DDR4 SDRAM
It is possible to install up to three NVIDIA Tesla T4 graphics accelerators or additional video cards. |
| Control Panel | Control buttons: Power, Reset, System ID, NMI
Indication: Power LED, ID LED, System Status LED, Drive activity LED, LAN 1/2 Activity LED |
| Management and Monitoring | Integrated Baseboard Management Controller Aspeed? AST2500, IPMI 2.0 & Redfish
Built-in RJ-45 1GbE remote management port
Fully functional remote control (KVM, Virtual Media over LAN)
GIGABYTE Management Console
GIGABYTE Server Management (GSM) |
| Supported Operating Systems | Windows Server 2016 (X2APIC/256T not supported)
Windows Server 2019
Windows Server 2022
Red Hat Enterprise Linux 8.3 (x64) or later
Red Hat Enterprise Linux 9.0 (x64) or later
SUSE Linux Enterprise Server 12 SP5 (x64) or later
SUSE Linux Enterprise Server 15 SP2 (x64) or later
Ubuntu 18.04.5 LTS (x64) or later
Ubuntu 20.04 LTS (x64) or later
Ubuntu 22.04 LTS (x64) or later
VMware ESXi 6.7 Update3 P03 or later
VMware ESXi 7.0 Update1 or later
VMware ESXi 8.0 or later
Citrix Hypervisor 8.2.0 or later |
| Power Unit | 2 x 1200W 80 Plus Platinum redundant hot-swappable power supplies
Power subsystem operating modes: 1+1 Redundant Power, 2+0 Combined Power |
| System Cooling | 5 controlled dual-rotor fans 40x40x56 mm with redundancy and hot-swappable capability, 23'000 RPM
x 40x40x28mm hot-swappable, redundant, single-motor fans, 18,000 RPM
1 fan in each power supply
CPU heatsink with passive cooling, low profile. |
| Dimensions | Height 4.35 cm, width 43.8 cm, depth 73.0 cm |
| Rack Mount Installation | Slide-out rails for rack mounting |
| Power Supply Parameters | 100-240 VAC, 7 A, 50-60 Hz |
| Operating Environment | Operating temperature from +10?C to +35?C
Relative humidity from 8% to 80%
Storage temperature from -40?C to +60?C
Relative humidity during storage from 20% to 95% |
| Warranty | Standard warranty 36 months, 9 x 5, service at the service center |