| Characteristic |
Description |
 | |
| Platform | Server platform GIGABYTE R183-Z92-AAD3 |
| Server Board | GIGABYTE Server Board MZ93-FS0
One or two AMD EPYC 9004 processors (Genoa/Bergamo), maximum TDP 400W
Interprocessor interface 512 GB/s (64 PCIe 5.0 Lines)
24 slots for installing DDR5-4800 memory modules
16 SATA ports, 4 USB 3.2 Gen1 ports, IPMI, 3 M.2 PCIe 2280/22110 slots
4 PCIe 5.0 x16 slots for installing riser cards, 2 PCIe 5.0 x16 OCP 3.0 slots, 128 PCIe 5.0 lanes when installing two CPUs
4 PCIe 5.0 x4 ports for connecting NVMe drives from CPU#2 (2 Mini Cool Edge IO x8 connectors)
Baseboard Management Controller Aspeed AST2600 |
| Form Factor | 1U, rack mountable |
| Processor | 1 or 2 AMD EPYC 9004 processors with a maximum TDP of 400W each, support for AMD 3D V-Cache Technology
For each processor:
Processor socket Socket SP5 (LGA 6096), AMD Zen 4 (Genoa/Bergamo) architecture, 5 nm process technology
Up to 128 cores, 256 threads, operating frequency up to 4.1 GHz (maximum 4.4 GHz in Boost mode)
Up to 1152 MB L3 cache per CPU, per core: 1024 KB L2, 32 KB (I)+ 32 KB (D) L1
Support for AMD Infinity Guard, AMD Infinity Architecture technologies
128 PCIe 5.0 lanes per CPU, 64 of which are used as interprocessor interface
Supports ECC DDR5-4800 memory, up to 6 TB per CPU (up to 12 TB total), integrated 12-channel memory controller |
| Chipset | System on Chip (SoC) (the chipset is built into the processor) |
| System Memory | Memory types:
- DDR5 ECC Registered Memory (RDIMM) 1.1V, DDR5 ECC Registered Memory 3DS (RDIMM 3DS) 1.1V
Maximum RAM (the processor supports a maximum of 6TB of RAM):
- for RDIMM - 1536 GB (24 x 64 GB)
- for RDIMM 3DS - 6144 GB (24 x 256 GB)
Memory modes: 4800 MT/s (1 DPC)
Integrated 12-channel memory controller (IMC) on the processor
Total 12 channels per CPU, one memory module per channel (1 DPC)
Total 12 memory modules per CPU, 24 memory modules per server
Memory subsystem bandwidth 460.8 GB/s |
| Network Adapters | Integrated network controller Intel Ethernet Controller I350-AM2, 2 ports 1Gb Ethernet RJ-45
Dedicated 1 Gb Ethernet RJ-45 management port
Additionally:
- up to two network modules with installation in the connectors on the OCP 3.0 motherboardPCIe 5.0 x16;
- up to two network adapters in standard expansion slotsPCIe 5.0 x16 |
| Expansion Slots | Riser Card #1:
- 1 slotPCIe 5.0 x16/x16 Full Height, Half Length, Connect toCPU#1
Riser Card #2:
- 1 slotPCIe 5.0 x16/x16 Full Height, Half Length, Connect toCPU#2
(Only works when a second processor is installed!)
SlotPCIe 5.0 x16 OCP 3.0 on the motherboard for installing a network module, connecting toCPU#1
SlotPCIe 5.0 x16 OCP 3.0 on the motherboard for installing a network module, connecting toCPU#2
(Only works when a second processor is installed!) |
| Disk Subsystem Controller | Integrated into CPU#1 SATA controller, 16 ports 6Gb/s (1 SFF-TA-1016 MCIO x8 connector, 2 SFF-TA-1016 MCIO x4 connectors)
4 PCIe 5.0 x4 ports for NVMe drives (2 SFF-TA-1016 MCIO x8 connectors fromCPU#2)
Additionally (selection in the Configurator fields "Disk subsystem controller" and "HBA adapter):
- RAID controller, HBA adapter or Tri-Mode controller in the PCIe 5.0 expansion slot for SAS3 and/or SATA drives;
- up to two OCP modules (each with four PCIe 4.0 x4 ports) for NVMe drives;
- HBA adapter with four PCIe 4.0 x4 ports for NVMe drives;
- Tri-Mode controller for an alternative option for connecting NVMe drives to PCIe 5.0 expansion slots. |
| Disk Subsystem | Up to 12 hot-swappable 2.5" SAS3/SATA3/NVMe Gen4 U.2/U.3 HDD/SSD drives in the front panel cage of the server.
Connectors on the basket for connecting cables:
- 3 SLIMLINE x4 connectors for SAS3/SATA drives;
- 12 SLIMLINE x4 slots for NVMe PCIe 4.0 x4 drives (U.2 or U.3)
Storage device connection options:
For SATA drives:
- to the integrated SATA controller CPU#1 with cables MCIO x8 -> 2 x SLIMLINE x4 and MCIO x4 -> SLIMLINE x4 (enabled by default for 12 drives).
For SATA and/or SAS drives:
- to a SAS RAID controller or HBA using HD Mini-SAS -> SLIMLINE x4 cables (up to 12 drives, an additional cable is required for every four drives);
to the Tri-Mode controller with cables 2 x HD Mini-SAS -> 2 x SLIMLINE x4 or SLIMLINE x8 -> 2 x SLIMLINE x4 (depending on the controller model, up to 12 drives, additional cables are required).
For NVMe drives:
- to four PCIe 5.0 x4 ports fromCPU#2on the motherboard with two cables MCIO x8 -> 2 x SLIMLINE x4 (additional cables required);
- to eight PCIe 4.0 x4 OCP modules ports fromCPU#1 AndCPU#2 SLIMLINE x4 -> SLIMLINE x4 cables (up to eight drives, each drive requires an additional cable).
- to four PCIe 4.0 x4 ports of the HBA adapter using SLIMLINE x4 -> SLIMLINE x4 cables (up to 4 drives per adapter, an additional cable is required for each drive).
- to the Tri-Mode controller using cables 2 x HD Mini-SAS -> 2 x SLIMLINE x4 or SLIMLINE x8 -> 2 x SLIMLINE x4 (depending on the controller model, up to four drives, an additional cable is required for each pair of drives). |
| Additional Storage | Up to three M.2 2280/22110 drives installed in a slot on the motherboard:
- PCIe 3.0 x4 from CPU#1
- PCIe 3.0 x4 from CPU#2
- PCIe 3.0 x2 from CPU#2
Up to two or four M.2 PCIe 3.0 x4 2280/22110 drives installed on an expansion card in a PCIe slot.
Up to two M.2 SATA / PCIe 4.0 x4 2280/22110 drives installed on a SAS3808-based expansion card with RAID 0/1 support in a PCIe slot. |
| Optical Storage | Not supported, only external via USB 3.2 port. |
| Interfaces | Front panel: 1 USB 3.2 Gen1
On the rear panel: Mini-DP video connector (D-Sub adapter included), RJ-45 1GbE management port, 2 1GbE RJ-45 network ports, 2 USB 3.2 Gen1 ports |
| Video Adapter and GPU | Integrated video controller Aspeed? AST2600 Video Graphic Adapter, 1920x1200@60Hz 32bpp, DDR4 SDRAM
It is possible to install an additional video card |
| Control Panel | On the front panel:
- control buttons: Power, Reset, System ID
indication: Power LED, ID LED, System Status LED, Drive activity LED, LAN Activity LED
On the back panel:
- indication: ID LED |
| Management and Monitoring | Integrated Baseboard Management Controller Aspeed? AST2600, IPMI 2.0 & Redfish
Built-in RJ-45 1GbE remote management port
Fully functional remote control (KVM, Virtual Media over LAN)
GIGABYTE Management Console
GIGABYTE Server Management (GSM) |
| Supported Operating Systems | Current list |
| Power Unit | x 1600W 80 Plus Platinum PSUs with redundancy and hot swappability
Power subsystem operating modes: 1+1 Redundant Power, 2+0 Combined Power
Supported technologies:
Cold Redundancy - at a power consumption level of up to 40% of the maximum, only one power supply is used, which increases energy efficiency by approximately 10%.
Smart Crises Management and Protection (SCMP) GIGABYTE patented technology for high-load systems. When the power consumption level is more than 50% of the maximum, in the event of a power supply failure, the system switches to a low-power mode to prevent unplanned shutdown.
Smart Ride Through (SmaRT) - a technology that prevents the system from shutting down during a short-term (up to 10-20 ms) power failure by reducing energy consumption (throttling). |
| System Cooling | 8 controlled dual-rotor fans 40x40x56 mm with redundancy and hot-swappable capability, 32'000 RPM
1 fan in each power supply
Passive Cooled CPU Heatsinks |
| Dimensions | Height 4.35 cm, width 43.8 cm, depth 81.5 cm |
| Rack Mount Installation | Slide-out rails for rack mounting |
| Power Supply Parameters | 100-240 VAC, 12-10 A, 50-60 Hz |
| Operating Environment | Operating temperature from +10?C to +35?C
Relative humidity from 8% to 80%
Storage temperature from -40?C to +60?C
Relative humidity during storage from 20% to 95% |
| Warranty | Standard warranty 36 months, 9 x 5, service at the service center |