| Characteristic |
Description |
 | |
| Platform | GIGABYTE R262-ZA0 Server Platform (rev. A00) |
| Server Board | GIGABYTE Server Board MZA2-CE0 Rev. 3.0
One AMD EPYC 7003 (Milan) or 7002 (Rome) processor, max cTDP 240W
16 slots for installing DDR4-3200 memory modules
8 SATA ports or 2 PCIe 4.0 x4 ports for NVMe drives, 4 USB 3.0 ports, COM port, IPMI
4 PCIe 4.0 slots, 128 PCIe 4.0 lanes
slots for installing mezzanine modules OCP 3.0 PCIe 4.0 x16 and OCP 2.0 PCIe 3.0 x8
Baseboard Management Controller Aspeed AST2500 |
| Form Factor | 2U, rack mountable |
| Processor | x AMD EPYC 7002/7003 processor with max cTDP 245W
Processor socket Socket SP3, AMD Zen 2 (Rome) / Zen 3 (Milan) architecture, 7 nm process technology
Up to 64 cores, 128 threads, operating frequency up to 3.7 GHz (maximum 4.1 GHz in Boost mode)
Up to 256MB L3 cache per CPU, per core: 512KB L2, 64KB (I)+ 32KB (D) L1
Support for Precision Boost technologies, SMT multi-threading
2 x 128-bit FMAC compute units (4 floating point instructions per cycle)
128 PCIe 4.0 lanes per CPU
Supports ECC DDR4-3200 memory, up to 4TB, integrated eight-channel memory controller |
| Chipset | System on Chip (SoC) (the chipset is built into the processor) |
| System Memory | Memory types:
- DDR4 ECC Registered Memory (RDIMM) 1.2V, DDR4 ECC Registered Memory 3DS (RDIMM 3DS) 1.2V
- DDR4 ECC Load Reduced Memory (LRDIMM) 1.2V, DDR4 ECC Load Reduced Memory 3DS (LRDIMM 3DS) 1.2V
Maximum RAM (the processor supports a maximum of 4TB of RAM):
- for RDIMM - 1024 GB (16 x 64 GB), for LRDIMM - 2048 GB (16 x 128 GB)
- for RDIMM 3DS - 2048 GB (16 x 128 GB), for LRDIMM 3DS - 4096 GB (16 x 256 GB)
Memory operating modes: 2933 (2 DPC) /3200 (1 DPC) MT/s (depending on the number of memory modules per channel (DPC))
Integrated eight-channel memory controller (IMC) on the processor
Total 8 channels per CPU, two memory modules per channel (2 DPC)
Total 16 memory modules per server
Memory subsystem bandwidth from 85.3 GB/s to 204.8 GB/s depending on the processor model |
| Network Adapters | Integrated network controller Intel Ethernet Controller I350-AM2, 2 ports 1Gb Ethernet RJ-45
Dedicated 1 Gb Ethernet RJ-45 management port
Additionally:
- replaceable network module with installation in the slot on the OCP3.0 PCIe 4.0 x16 motherboard;
- replaceable network module with installation in a slot on the OCP2.0 PCIe 3.0 x8 motherboard;
- network adapter in a standard PCIe 4.0 expansion slot |
| Expansion Slots | Riser Card #1:
- 1 PCIe 4.0 x16/x16 Full Height, Half Length slot;
Riser Card #2:
- 1 PCIe 4.0 x16/x16 Full Height, Half Length slot, shares 8 PCIe lanes with OCP 2.0 connector;
PCIe 4.0 x16 OCP 3.0 slot on motherboard;
PCIe 3.0 x8 OCP 2.0 Type1 slot on motherboard, shares 8 PCIe lanes with Riser Card #2.
Important: One of the expansion slots must have a RAID controller, HBA adapter, or Tri-Mode controller installed to connect to the port expander. |
| Disk Subsystem Controller | 2 PCIe 4.0 x4 ports for NVMe drives, 2 SFF-8654 SLIMLINE x4 connectors.
Broadcom SAS35x48 Expander, 48 SAS3 12 Gb/s ports, 8 incoming ports, 40 outgoing ports (12 SLIMLINE x4 connectors).
Additionally (selection in the Configurator fields "Disk subsystem controller" and "HBA adapter):
- GIGABYTE SAS module for SAS3 and/or SATA drives (via expander) to the OCP2.0 PCIe 3.0 x16 slot on the motherboard;
- RAID controller, HBA adapter or Tri-Mode controller for SAS3 and/or SATA drives (via expander) in PCIe 4.0 expansion slot
Requires installation of a RAID controller with connection to a port expander to use SATA and/or SAS drives.
1 slot on the motherboard for M.2 PCIe 4.0 x4 storage, form factor 2280/22110. |
| Disk Subsystem | Up to 24 hot-swappable 2.5" SAS3/SATA3 SSDs in front panel cage (6 x SLIMLINE x4 slots)
Up to 8 hot-swappable 2.5" SAS3/SATA3 SSDs in a cage on the rear panel of the server (2 SLIMLINE x4 slots)
Up to 8 hot-swappable 2.5" SAS3/SATA3 SSDs in internal cage (2 x SLIMLINE x4 slots)
Connecting drives to a port expander, enabled by default for 40 drives.
Up to 2 hot-swap 2.5" NVMe PCIe 4.0 x4 drives in a cage on the rear of the server.
Connecting drives to the processor's PCIe 4.0 x4 ports, enabled by default for 2 drives. |
| Additional Storage | One M.2 PCIe 4.0 x4 2280/22110 drive installed in a slot on the motherboard.
Up to two or four M.2 PCIe 3.0 x4 2280/22110 drives installed on an expansion card in a PCIe slot.
Up to two M.2 SATA / PCIe 3.0 x4 2280/22110 drives installed on a SAS3408-based expansion card with RAID 0/1 support in a PCIe slot. |
| Optical Storage | Not supported, only external via USB 3.0 port. |
| Interfaces | Front panel: 2 USB 3.0 ports
On the rear panel: DB-15 video connector, RJ-45 1GbE management port, 2 USB 3.0 ports, 2 1GbE RJ-45 network ports, ID Button with LED
Internal ports: COM port |
| Video Adapter and GPU | Integrated video controller Aspeed? AST2500 Video Graphic Adapter, 1920x1200@60Hz 32bpp, DDR4 SDRAM |
| Control Panel | Control buttons: Power, Reset, System ID, NMI
Indication: Power LED, ID LED, System Status LED, Drive activity LED, LAN 1/2 Activity LED |
| Management and Monitoring | Integrated Baseboard Management Controller Aspeed? AST2500, IPMI 2.0 & Redfish
Built-in RJ-45 1GbE remote management port
Fully functional remote control (KVM, Virtual Media over LAN)
GIGABYTE Management Console
GIGABYTE Server Management (GSM) |
| Supported Operating Systems | Windows Server 2016 (X2APIC/256T not supported)
Windows Server 2019
Windows Server 2022
Red Hat Enterprise Linux 8.3 (x64) or later
Red Hat Enterprise Linux 9 (x64) or later
SUSE Linux Enterprise Server 12 SP5 (x64) or later
SUSE Linux Enterprise Server 15 SP2 (x64) or later
Ubuntu 18.04.5 LTS (x64) or later
Ubuntu 20.04 LTS (x64) or later
Ubuntu 22.04 LTS (x64) or later
VMware ESXi 6.7 Update3 P03 or later
VMware ESXi 7.0 Update1 or later
Citrix Hypervisor 8.2.0 or later |
| Power Unit | 2 x 1200W 80 Plus Platinum redundant hot-swappable power supplies
Power subsystem operating modes: 1+1 Redundant Power, 2+0 Combined Power
Supported technologies:
Cold Redundancy - at a power consumption level of up to 40% of the maximum, only one power supply is used, which increases energy efficiency by approximately 10%.
Smart Crises Management and Protection (SCMP) GIGABYTE patented technology for high-load systems. When the power consumption level is more than 50% of the maximum, in the event of a power supply failure, the system switches to a low-power mode to prevent unplanned shutdown.
Smart Ride Through (SmaRT) - a technology that prevents the system from shutting down during a short-term (up to 10-20 ms) power failure by reducing energy consumption (throttling). |
| System Cooling | 4 controlled single-rotor fans 80x80x38 mm with redundancy and hot-swappable capability, 16'300 RPM
1 fan in each power supply
CPU radiator with passive cooling |
| Dimensions | Height 8.75 cm, width 43.8 cm, depth 73.0 cm |
| Rack Mount Installation | Slide-out rails for rack mounting |
| Power Supply Parameters | 100-240 VAC, 12 - 7 A, 50-60 Hz |
| Operating Environment | Operating temperature from +10?C to +35?C
Relative humidity from 8% to 80%
Storage temperature from -40?C to +60?C
Relative humidity during storage from 20% to 95% |
| Warranty | Standard warranty 36 months, 9 x 5, service at the service center |