| Characteristic |
Description |
 | |
| Platform | GIGABYTE R263-Z32-AAC1 Server Platform |
| Server Board | GIGABYTE Server Board MZ33-DC0
One AMD EPYC 9004 processor (Genoa/Bergamo), max TDP 400W (with limitations)
12 slots for installing DDR5-4800 memory modules
16 SATA ports, 4 USB 3.2 Gen1 ports, IPMI, M.2 PCIe 3.0 x4 2280/22110 slot
PCIe 5.0 x16 slots for installing riser cards, 2 PCIe 5.0 x16 OCP 3.0 slots, 124 PCIe 5.0 lanes
8 PCIe 5.0 x4 ports for connecting NVMe drives (4 Mini Cool Edge IO x8 connectors)
Baseboard Management Controller Aspeed AST2600 |
| Form Factor | 2U, rack mountable |
| Processor | 1 AMD EPYC 9004 processor with maximum TDP 400W (with limitations), support for AMD 3D V-Cache Technology
Processor socket Socket SP5 (LGA 6096), AMD Zen 4 (Genoa/Bergamo) architecture, 5 nm process technology
Up to 128 cores, 256 threads, operating frequency up to 4.1 GHz (maximum 4.4 GHz in Boost mode)
Up to 1152 MB L3 cache per CPU, per core: 1024 KB L2, 32 KB (I)+ 32 KB (D) L1
Support for AMD Infinity Guard, AMD Infinity Architecture technologies
128 PCIe 5.0 lanes
Supports ECC DDR5-4800 memory, up to 6 TB per CPU, integrated 12-channel memory controller |
| Chipset | System on Chip (SoC) (the chipset is built into the processor) |
| System Memory | Memory types:
- DDR5 ECC Registered Memory (RDIMM) 1.1V, DDR5 ECC Registered Memory 3DS (RDIMM 3DS) 1.1V
Maximum RAM (the processor supports a maximum of 6TB of RAM):
- for RDIMM - 1536 GB (12 x 128 GB)
- for RDIMM 3DS - 3072 GB (12 x 256 GB)
Memory modes: 4800 MT/s (1 DPC)
Integrated 12-channel memory controller (IMC) on the processor
Total 12 channels per CPU, one memory module per channel (1 DPC)
Total 12 memory modules per CPU, 12 memory modules per server
Memory subsystem bandwidth 460.8 GB/s |
| Network Adapters | Integrated network controller Intel Ethernet Controller I210-AT, 1 port 1Gb Ethernet RJ-45
Dedicated 1 Gb Ethernet RJ-45 management port
Additionally:
- up to two network modules with installation in the connectors on the OCP 3.0 motherboardPCIe 5.0 x16;
- up to four network adapters in standard expansion slotsPCIe |
| Expansion Slots | Riser Card #1:
- 1 slotPCIe 5.0 x16/x16 Full Height, Half Length, Connect toCPU
- 1 slot PCIe 4.0 x8/x16 Full Height, Half Length, Connect toCPU
Riser Card #2:
- 1 slotPCIe 5.0 x16/x16 Full Height, Half Length, Connect toCPU
- 1 slot PCIe 4.0 x8/x16 Full Height, Half Length, Connect toCPU
2 slotsPCIe 5.0 x16 OCP 3.0 on the motherboard for installing a network module, connecting toCPU |
| Disk Subsystem Controller | Integrated CPU SATA controller, 16 ports 6Gb/s (2 SFF-TA-1016 MCIO x8 connectors)
8 PCIe 5.0 x4 ports for NVMe drives (4 SFF-TA-1016 MCIO x8 connectors fromCPU)
Additionally (selection in the Configurator fields "Disk subsystem controller" and "HBA adapter):
- RAID controller, HBA adapter or Tri-Mode controller in the PCIe 5.0 expansion slot for SAS3 and/or SATA drives;
- up to two OCP modules with four PCIe 4.0 x4 ports each for eight additional NVMe drives;
- up to two HBAs with four PCIe 4.0 x4 ports each for eight additional NVMe drives;
- Tri-Mode controller for an alternative option for connecting NVMe drives to PCIe 5.0 expansion slots. |
| Disk Subsystem | Up to 24 hot-swappable 2.5" SAS3/SATA3/NVMe Gen4 U.2/U.3 HDD/SSD drives in a cage on the front panel of the server.
Connectors on the basket for connecting cables:
- 6 SLIMLINE x4 connectors for SAS3/SATA drives;
- 24 SLIMLINE x4 slots for NVMe PCIe 4.0 x4 drives (U.2 or U.3)
Storage device connection options:
For SATA drives:
- to the integrated SATA-controller of the CPU with two cables MCIO x8 -> 2 x SLIMLINE x4 (connected by default for 16 drives, bays 1-16).
For SATA and/or SAS drives:
- to a SAS RAID controller or HBA using HD Mini-SAS -> SLIMLINE x4 cables (up to 24 drives, an additional cable is required for every four drives);
to the Tri-Mode controller using cables 2 x HD Mini-SAS -> 2 x SLIMLINE x4 or SLIMLINE x8 -> 2 x SLIMLINE x4 (depending on the controller model, up to 24 drives, additional cables required).
For NVMe drives:
- to 8 PCIe 5.0 x4 ports fromCPUon the motherboard with four cables MCIO x8 -> 2 x SLIMLINE x4 (connected by default for 8 drives, bays 17-24);
- to eight PCIe 4.0 x4 OCP modules ports fromCPU SLIMLINE x4 -> SLIMLINE x4 cables (up to eight additional drives, four per module, each drive requires an additional cable).
- to eight PCIe 4.0 x4 HBA ports fromCPU SLIMLINE x8 -> 2 x SLIMLINE x4 cables (up to eight additional drives, four per HBA, each pair of drives requires an additional cable).
to the Tri-Mode controller using cables 2 x HD Mini-SAS -> 2 x SLIMLINE x4 or SLIMLINE x8 -> 2 x SLIMLINE x4 (depending on the controller model, up to four drives per controller, an additional cable is required for each pair of drives). |
| Additional Storage | One M.2 PCIe 3.0 x4 drive from a 2280/22110 format CPU installed in a slot on the motherboard.
Up to two or four M.2 PCIe 3.0 x4 2280/22110 drives installed on an expansion card in a PCIe slot.
Up to two M.2 SATA / PCIe 4.0 x4 2280/22110 drives installed on a SAS3808-based expansion card with RAID 0/1 support in a PCIe slot. |
| Optical Storage | Not supported, only external via USB 3.2 port |
| Interfaces | Front panel: 2 USB 3.2 Gen1 ports
On the rear panel: Mini-DP video connector (D-Sub adapter included), RJ-45 1GbE control port, 1GbE RJ-45 network port, 2 USB 3.2 Gen1 ports |
| Video Adapter and GPU | Integrated video controller Aspeed? AST2600 Video Graphic Adapter, 1920x1200@60Hz 32bpp, DDR4 SDRAM
It is possible to install an additional video card |
| Control Panel | On the front panel:
- control buttons: Power, Reset, System ID, NMI
indication: Power LED, ID LED, System Status LED, Drive activity LED, LAN Activity LED
On the back panel:
- control buttons: System ID
- indication: ID LED |
| Management and Monitoring | Integrated Baseboard Management Controller Aspeed? AST2600, IPMI 2.0 & Redfish
Built-in RJ-45 1GbE remote management port
Fully functional remote control (KVM, Virtual Media over LAN)
GIGABYTE Management Console
GIGABYTE Server Management (GSM) |
| Supported Operating Systems | Current list |
| Power Unit | 2 x 1300W 80 Plus Platinum redundant hot-swappable power supplies
Power subsystem operating modes: 1+1 Redundant Power, 2+0 Combined Power
Supported technologies:
Cold Redundancy - at a power consumption level of up to 40% of the maximum, only one power supply is used, which increases energy efficiency by approximately 10%.
Smart Crises Management and Protection (SCMP) GIGABYTE patented technology for high-load systems. When the power consumption level is more than 50% of the maximum, in the event of a power supply failure, the system switches to a low-power mode to prevent unplanned shutdown.
Smart Ride Through (SmaRT) - a technology that prevents the system from shutting down during a short-term (up to 10-20 ms) power failure by reducing energy consumption (throttling). |
| System Cooling | 4 controlled single-rotor fans 80x80x38 mm with redundancy and hot-swappable capability, 18'300 RPM
1 fan in each power supply
CPU radiator with passive cooling |
| Dimensions | Height 8.75 cm, width 43.8 cm, depth 71.0 cm |
| Rack Mount Installation | Slide-out rails for rack mounting |
| Power Supply Parameters | 100-240 VAC, 10 A, 50-60 Hz |
| Operating Environment | Operating temperature from +10?C to +35?C
Relative humidity from 8% to 80%
Storage temperature from -40?C to +60?C
Relative humidity during storage from 20% to 95% |
| Warranty | Standard warranty 36 months, 9 x 5, service at the service center |