| Characteristic |
Description |
 | |
| Platform | GIGABYTE R264-S30-AAV1 Server Platform |
| Server Board | GIGABYTE Server Board MS34-DC0
One Intel? Xeon? 6 processor (6700E), maximum TDP 350W
16 slots for installing DDR5-6400 RDIMM RAM modules
2 PCIe 5.0 x2 slots for M.2 drives, 4 USB 3.2 Gen1 ports, IPMI, Dual BIOS, Dual BMC Firmware
4 PCIe 5.0 x16 slots for installing riser cards(2) and OCP modules(2), 88 PCIe 5.0 lanes
PCIe 5.0 x4 ports for connecting NVMe drives (2 MCIO x8 connectors from the processor)
Baseboard Management Controller Aspeed AST2600 |
| Form Factor | 2U, rack mountable |
| Processor | Intel? Xeon? 6 Processor family (6700E CPU with E-Cores)
Maximum Thermal Design Power (TDP) -350W on the processor
Supported Processors: Intel Xeon 6 Processors with E-Cores (6700E Series)
Processor socket FCLGA4710 (E2), Intel Sierra Forest architecture, Intel process technology 3
From 64 to 144 cores/144 threads per processor, operating frequency from 1.8 GHz to 2.4 GHz
Up to 144 logical CPUs per server
Up to 108 MB L3 cache per processor
Maximum amount of RAM supported by the processor4 TB
Supports DDR5-6400 RDIMM memory
8-channel memory controller (IMC)
88 PCIe 5.0 lanes per processor (8 GB/s per lane) |
| Chipset | System on Chip (SoC) (the chipset is built into the processor) |
| System Memory | Memory types:
- DDR5 ECC Registered Memory (RDIMM) 1.1V
Supported module types: 32GB, 64GB, 96GB, 128GB
(32GB modules can only be installed one per channel)
Maximum server RAM (processor supports maximum 4 TB of RAM):
- for RDIMM - 2048 GB (16 x 128 GB)
Memory operating modes: maximum 6400 MT/s (1 DPC) / 5200 MT/s (2 DPC), depends on the processor model
Integrated 8-channel memory controller (IMC) on the processor
Total 8 channels per CPU, one or two memory modules per channel (1 DPC/2 DPC)
Total 16 memory modules per CPU, 16 memory modules per server
Memory subsystem bandwidth 410 (1 DPC) / 333 (2 DPC) GB/s |
| Network Adapters | Integrated network controller Intel Ethernet Controller I210-AT, 1 port 1Gb Ethernet RJ-45
Dedicated 1 Gb Ethernet RJ-45 management port
Additionally:
- network module with installation in a slot on the motherboard OCP 3.0 PCIe 5.0 x16;
- network adapter in a standard PCIe 5.0 x16 expansion slot |
| Expansion Slots | Riser Card #1:
- 1 x PCIe 5.0 x16/x16 Full Height, Half Length
PCIe 5.0 x16 OCP 3.0 slot on the motherboard for installing a network module |
| Disk Subsystem Controller | Integrated SATA controller, 12 ports 6Gb/s (3 SLIMLINE x4 connectors), no RAID support, combined with M.2 drive connector
12 PCIe 5.0 x4 ports for connecting NVMe drives (2 SFF-TA-1016 MCIO x8 connectors, PCIe 5.0 x16 connector for riser card, PCIe 5.0 x16 connector for OCP 3.0 module)
- support for Intel VMD, Intel VROC 8.0 RAID 0/1/10/5 (RAID requires Intel VROC Key)
PCIe 5.0 x2 slots from CPU for M.2 2280/22110 drives (the second one is only functional when the SATA controller is disabled)
- support for Intel VMD, Intel VROC 8.0 RAID 0/1 (RAID requires Intel VROC Key)
Additionally (selection in the Configurator fields "Disk subsystem controller" and "HBA adapter):
- RAID controller, HBA adapter or Tri-Mode controller for SAS4 and/or SATA drives in PCIe 5.0 expansion slots;
- Tri-Mode controller for an alternative option for connecting NVMe drives to PCIe 5.0 expansion slots. |
| Disk Subsystem | Up to 12 hot-swappable 3.5"/2.5" drivesSAS4/SATA3/NVMe Gen5 U.2/U.3HDD/SSD into the basket on the front panel of the server.
Connectors on the basket for connecting cables:
- 3 SLIMLINE x4 connectors for storage devicesSAS4/SATA;
- 12 MCIO x4 slots for storage devicesNVMe Gen5 PCIe 5.0 x4 (U.2 or U.3)
Storage device connection options:
For SATA drives:
to the integrated SATA controller of the motherboard with cables SLIMLINE x4 -> SLIMLINE x4 (enabled by default for 12 drives).
For SATA and/or SAS4 drives:
- to a SAS RAID controller or HBA using HD Mini-SAS -> SLIMLINE x4 cables (up to 12 drives, an additional cable is required for every four drives);
- to the Tri-Mode controller using cables HD Mini-SAS -> SLIMLINE x4 or SLIMLINE x8 -> 2 x SLIMLINE x4 (depending on the controller model, up to 12 drives, additional cables required).
For NVMe drives:
- to 4 PCIe 5.0 x4 ports from the CPU via the riser card connector with two cables MCIO x8 -> 2 x MCIO x4 (connected by default for 4 drives, bays 1-4);
to 4 PCIe 5.0 x4 ports from the CPU on the motherboard with two cables MCIO x8 -> 2 x MCIO x4 (connected by default for 4 drives, bays 5-8);
- to 4 PCIe 5.0 x4 ports from the CPU via the OCP module connector with two cables MCIO x8 -> 2 x MCIO x4 (connected by default for 4 drives, bays 9-12);
- to the Tri-Mode controller using SLIMLINE x8 -> 2 x MCIO x4 cables (up to four drives per controller, an additional cable is required for each pair of drives). |
| Additional Storage | One M.2 PCIe 5.0 x2 2280/22110 drive installed in a slot on the motherboard
One M.2 PCIe 5.0 x2 2280/22110 drive installed in a slot on the motherboard with the SATA controller disabled
Up to two or four M.2 PCIe 3.0 x4 2280/22110 drives installed on an expansion card in a PCIe slot, RAID 0/1/10/5 support (VROC key required)
Up to two M.2 SATA / PCIe 4.0 x4 2280/22110 drives installed on a SAS3808-based expansion card with RAID 0/1 support in a PCIe slot |
| Optical Storage | Not supported, only external via USB 3.2 port. |
| Interfaces | Front panel: 2 USB 3.2 Gen1 ports
On the rear panel: Mini-DP video connector (D-Sub adapter included), RJ-45 1GbE management port, 1 1GbE RJ-45 network port, 2 USB 3.2 Gen1 ports |
| Video Adapter and GPU | Integrated video controller Aspeed? AST2600 Video Graphic Adapter, 1920x1200@60Hz 32bpp, DDR4 SDRAM.
Installation of additional video cards is possible. |
| Control Panel | On the front panel:
- control buttons: Power, Reset, System ID, NMI
indication: Power LED, ID LED, System Status LED, Drive activity LED, LAN Activity LED
On the back panel:
- indication: ID LED |
| Management and Monitoring | Integrated Baseboard Management Controller Aspeed? AST2600, IPMI 2.0 & Redfish
Built-in RJ-45 1GbE remote management port
Fully functional remote control (KVM, Virtual Media over LAN)
GIGABYTE Management Console
GIGABYTE Server Management (GSM) |
| Supported Operating Systems | Current list |
| Power Unit | 2 x 1600W 80 Plus Titanium PSUs with redundancy and hot swappability
Power subsystem operating modes: 1+1 Redundant Power, 2+0 Combined Power
Supported technologies:
Cold Redundancy - at a power consumption level of up to 40% of the maximum, only one power supply is used, which increases energy efficiency by approximately 10%.
Smart Crises Management and Protection (SCMP) GIGABYTE patented technology for high-load systems. When the power consumption level is more than 50% of the maximum, in the event of a power supply failure, the system switches to a low-power mode to prevent unplanned shutdown.
Smart Ride Through (SmaRT) - a technology that prevents the system from shutting down during a short-term (up to 10-20 ms) power failure by reducing energy consumption (throttling). |
| System Cooling | 4 controlled single-rotor fans 80x80x38 mm with redundancy and hot-swappable capability, 18'300 RPM
1 fan in each power supply
Passive Cooled CPU Heatsinks |
| Dimensions | Height 8.75 cm, width 43.8 cm, depth 71.0 cm |
| Rack Mount Installation | Slide-out rails for rack mounting |
| Power Supply Parameters | 100-240 VAC, 12-10 A, 50-60 Hz |
| Operating Environment | Operating temperature from +10?C to +35?C
Relative humidity from 8% to 80%
Storage temperature from -40?C to +60?C
Relative humidity during storage from 20% to 95% |
| Warranty | Standard warranty 36 months, 9 x 5, service at the service center |