| Characteristic |
Description |
 | |
| Platform | GIGABYTE S451-Z30 Server Platform (rev. B00) |
| Server Board | GIGABYTE Server Board MZ31-AR0 Rev. 3.0
One AMD EPYC 7003 (Milan) or 7002 (Rome) processor, max TDP 155W
16 slots for installing DDR4-3200 memory modules
16 SATA ports, 4 USB 3.0 ports, 2 USB 2.0 ports, 2 COM ports, IPMI
7 PCIe 3.0 slots, 128 PCIe 3.0 lanes
1 x M.2 PCIe 3.0 x4 2242/2260/2280 port
Baseboard Management Controller Aspeed AST2500 |
| Form Factor | 4U, rack mountable |
| Processor | 1 x AMD EPYC 7002/7003 processor with max TDP 155W
Processor socket Socket SP3, AMD Zen 2 (Rome) / Zen 3 (Milan) architecture, 7 nm process technology
Up to 64 cores, 128 threads, operating frequency up to 3.7 GHz (maximum 4.1 GHz in Boost mode)
Up to 256MB L3 cache per CPU, per core: 512KB L2, 64KB (I)+ 32KB (D) L1
Support for Precision Boost technologies, SMT multi-threading
2 x 128-bit FMAC compute units (4 floating point instructions per cycle)
128 PCIe 4.0 lanes per CPU
Supports ECC DDR4-3200 memory, up to 4TB per CPU, integrated eight-channel memory controller |
| Chipset | System on Chip (SoC) (the chipset is built into the processor) |
| System Memory | Memory types:
- DDR4 ECC Registered Memory (RDIMM) 1.2V, DDR4 ECC Registered Memory 3DS (RDIMM 3DS) 1.2V
- DDR4 ECC Load Reduced Memory (LRDIMM) 1.2V, DDR4 ECC Load Reduced Memory 3DS (LRDIMM 3DS) 1.2V
Maximum RAM (the processor supports a maximum of 4TB of RAM):
- for RDIMM - 1024 GB (16 x 64 GB), for LRDIMM - 2048 GB (16 x 128 GB)
- for RDIMM 3DS - 2048 GB (16 x 128 GB), for LRDIMM 3DS - 4096 GB (16 x 256 GB)
Memory modes: 3200 MT/s (1 DPC) | 2933, 3200* MT/s (2 DPC), depending on the number of memory modules per channel (DPC)
Integrated eight-channel memory controller (IMC) on the processor
Total 8 channels per CPU, two memory modules per channel (2 DPC)
Total 16 memory modules per CPU
Memory subsystem bandwidth from 85.3 GB/s to 204.8 GB/s depending on the processor model
* with appropriate BIOS settings |
| Network Adapters | Integrated network controller Broadcom BCM 57810S Ethernet Controller, 2 ports 10Gb Ethernet SFP+
Dedicated 1 Gb Ethernet RJ-45 management port
Additionally:
- up to seven network adapters in standard PCIe 3.0 expansion slots |
| Expansion Slots | Seven low-profile expansion slots:
- 4 PCIe 3.0 x16/x16 slots
- 1 PCIe 3.0 x8/x16 slot
- 2 PCIe 3.0 x8/x8 slots |
| Disk Subsystem Controller | Integrated CPU SATA controller, 16 6Gb/s ports (4 SFF-8654 SLIMLINE x4 connectors);
(Cannot be used with port expander)
Disk cages with Broadcom SAS35x36R Expander ports.
Requires installation of a RAID controller or HBA with connection to port expanders to use SATA and/or SAS drives.
Additionally (selection in the Configurator fields "Disk subsystem controller" and "HBA adapter):
RAID controller, HBA adapter or Tri-Mode controller for SAS3 and/or SATA drives (via expander) in PCIe 3.0 expansion slots; |
| Disk Subsystem | Up to 36 hot-swappable 3.5/2.5" SAS3/SATA3 HDD drives in the front and rear cages (with port expanders) of the server.
Options for connecting SATA and/or SAS drives (via Broadcom SAS3x36R port expanders):
- to a RAID controller or HBA using HD Mini-SAS -> SLIMLINE x4 cables (for 36 drives, cables included in the delivery package);
- to the Tri-Mode controller or HBA with cables 2 x HD Mini-SAS -> 2 x SLIMLINE x4 or SLIMLINE x8 -> 2 x SLIMLINE x4 (depending on the controller model, for 36 drives, an additional cable is required).
Up to 2 hot-swappable 2.5" SATA3/SAS SSD drives in a cage on the rear of the server.
Cable tray connectors: 2 x 7-Pin SATA connectors for SATA/SAS3 drives.
Storage device connection options:
For SATA drives:
- to the integrated SATA-controller of the CPU with the SLIMLINE x4 -> 2 x 7-Pin SATA cable (enabled by default for 2 drives).
For SATA and/or SAS drives:
- to SAS RAID controller or HBA with HD Mini-SAS -> 4 x 7-Pin SATA cable (for 2 drives, additional cable required);
- to the Tri-Mode controller with a cable HD Mini-SAS -> 4 x 7-Pin SATA or SLIMLINE x8 -> 4 x 7-Pin SATA (depending on the controller model, for 2 drives, an additional cable is required). |
| Additional Storage | One M.2 PCIe 3.0 x4 2242/2260/2280 drive installed in a slot on the motherboard.
Up to two or four M.2 PCIe 3.0 x4 2280/22110 drives installed on an expansion card in a PCIe slot.
Up to two M.2 SATA or PCIe 3.0 x4 2280/22110 drives installed on a SAS3408-based expansion card with RAID 0/1 support in a PCIe slot. |
| Optical Storage | Not supported, only external via USB 3.0 port. |
| Interfaces | Front panel: 2 USB 3.0 ports
On the rear panel: DB-15 video connector, RJ-45 1GbE management port, 2 USB 3.0 ports, 2 USB 2.0 ports, 2 10GbE SFP+ network ports, COM port, ID Button with LED
Internal ports: Serial Port |
| Video Adapter and GPU | Integrated video controller Aspeed? AST2500 Video Graphic Adapter, 1920x1200@60Hz 32bpp, DDR4 SDRAM
It is possible to install a graphics accelerator or an additional video card. |
| Control Panel | Control buttons: Power, Reset, System ID, NMI
Indication: Power LED, ID LED, System Status LED, Drive activity LED, LAN 1/2 Activity LED |
| Management and Monitoring | Integrated Baseboard Management Controller Aspeed? AST2500, IPMI 2.0 & Redfish
Built-in RJ-45 1GbE remote management port
Fully functional remote control (KVM, Virtual Media over LAN)
GIGABYTE Management Console
GIGABYTE Server Management (GSM) |
| Supported Operating Systems | Windows Server 2016 (X2APIC/256T not supported)
Windows Server 2019
Windows Server 2022
Red Hat Enterprise Linux 8.3 (x64) or later
Red Hat Enterprise Linux 9.0 (x64) or later
SUSE Linux Enterprise Server 12 SP5 (x64) or later
SUSE Linux Enterprise Server 15 SP2 (x64) or later
Ubuntu 18.04.5 LTS (x64) or later
Ubuntu 20.04 LTS (x64) or later
Ubuntu 22.04 LTS (x64) or later
VMware ESXi 6.7 Update3 P03 or later
VMware ESXi 7.0 Update1 or later
VMware ESXi 8.0 or later
Citrix Hypervisor 8.2.0 or later |
| Power Unit | 2 x 1200W 80 Plus Platinum redundant hot-swappable power supplies
Power subsystem operating modes: 1+1 Redundant Power, 2+0 Combined Power |
| System Cooling | 7 x 80x80x38mm hot-swappable, redundant, controlled fans, 9,400 RPM
1 fan in each power supply
CPU heatsink with passive cooling, low profile. |
| Dimensions | Height 17.7 cm, width 48.3 cm, depth 62.5 cm |
| Rack Mount Installation | Slide-out rails for rack mounting |
| Power Supply Parameters | 100-240 VAC, 12 - 7 A, 50-60 Hz |
| Operating Environment | Operating temperature from +10?C to +35?C
Relative humidity from 8% to 80%
Storage temperature from -40?C to +60?C
Relative humidity during storage from 20% to 95% |
| Warranty | Standard warranty 36 months, 9 x 5, service at the service center |