| Characteristic |
Description |
 | |
| Base Configuration | HPE ProLiant DL360 Gen9, part number 774437-425 |
| Form Factor | 1U, rack mountable |
| CPU | Intel Xeon E5-2620 v3 processor: 6 cores, 15MB L3 cache, 2.4GHz operating frequency, 2 QPI 8.0GT/s channels
Maximum number of processors per server - 2, 24 logical CPUs per system with Intel Hyper-Threading technology
Maximum supported RAM frequency 1866MHz |
| Chipset | Intel C610 Series Chipset |
| RAM | Preinstalled 16 GB memory: 1 HPE 16GB (1x16GB) Dual Rank x4 DDR4-2133 CAS-15-15-15 Registered Memory Kit
Supported memory types: HPE SmartMemory DDR4 Load Reduced DIMM (LRDIMM), DDR4 Registered DIMM (RDIMM)
Maximum RAM 768GB (24x32GB) for LRDIMM, 384GB (24x16GB) for RDIMM
Quad-channel memory controller integrated into the CPU: 24 slots per server, 12 slots per CPU, 3 modules per channel
Memory operating frequency of 1866 MHz (limited by the processor)
Maximum memory subsystem bandwidth of 59.7 GB / s per processor
Support for HPE SmartMemory, Advanced technologies ECC, Online Spare |
| Disk subsystem | Up to 8 Hot Plug 2.5" SFF SAS/SATA HDD/SSD hot swap drives
Additional 2 Hot Plug 2.5" SFF SAS/SATA HDD/SSD drives when installing a drive cage in the Media slot
Installed drives: 2 x HPE 300GB 6G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive |
| Disk subsystem controller | HPE Smart Array P440ar/2GB FBWC 12Gb SAS Controller Modular RAID Controller
8 SAS 12Gb/s ports, RAID 0/1/10/5/50/6/60 (Hardware RAID), 2GB FBWC Memory, HBA Mode support
Additionally:
HPE H241 12Gb SAS Smart Host Bus Adapter (RAID 0/1/10/5) 8 Ports External
HPE Smart Array P441/4GB FBWC 12Gb SAS Controller (RAID 1/10/5/50/6/60) 8 Ports External RAID Controller
HPE Smart Array P840/4GB FBWC 12Gb SAS Controller (RAID 1/10/5/50/6/60) 16 Ports Internal |
| Network controller | Integrated Network Controller HPE Ethernet 1Gb 4-port 331i Adapter
Additional FlexibleLOM Adapter I/O Module
1GbE Management Port (Dedicated iLO connector) |
| Expansion slots | Slot 1 PCIe 3.0 x16/x16 3/4 Length/Full Height Slot connection to CPU1
Slot 2 PCIe 3.0 x8/x8 Low Profile Slot connection to CPU1
Optional:
Slot 3 PCIe 3.0 x16/x16 Low Profile Slot connection to CPU2 OR
Slot 3 PCIe 3.0 x16/x16 3/4 Length/Full Height Slot connection to CPU2 |
| Optical storage | HPE SATA DVD-RW Optical Drive |
| Interfaces | Front: 1 x USB 3.0, optional: VGA port, USB 2.0 port
Rear: 2 x USB 3.0, DB-15 Video Connector, 4 x GbE RJ-45, 1GbE RJ-45 Management Port, Serial Port (optional)
Internal Ports: Micro SD Slot, 2 x USB 3.0 |
| Compliance with industry standards | ACPI 2.0b Compliant
PCIe 3.0 Compliant
PXE Support
WOL Support
Microsoft® Logo certifications
USB 3.0 Support
Energy Star
ASHRAE A3/A4 |
| Video adapter | Integrated Matrox G200 video standard, 1280 x 1024 (32 bpp), 1920 x 1200 (16 bpp)
Up to two HPE NVIDIA Quadro K2200/K4200 Graphics Accelerator GPUs |
| Power Unit | 1 x HPE 500W Hot-Swappable Redundant Platinum-level Power Supply (94%) OR
2 x HPE 500W Hot-Swappable Redundant Platinum-level Power Supplies (94%) |
| Cooling | hot-swappable, redundant, controllable system fans in 1-processor configurations
7 hot-swappable, redundant, controllable system fans in 2-processor configurations
Optional: High-efficiency cooling system for operation above 35°C. |
| Supported Operating Systems | Microsoft Windows Server
Canonical Ubuntu
Red Hat Enterprise Linux (RHEL)
SUSE Linux Enterprise Server (SLES)
Oracle Solaris
VMware
Citrix XenServer |
| Rack mount installation | HPE 1U Small Form Factor Easy Install Rail Kit with Cable Organizer
Optional:
- HPE 1U SFF Ball Bearing G8 Rail Kit
- Cable Organizer for Slide-out Rail Kit
- HP Tamper-Proof Front Bezel |
| Built-in controls | HPE iLO (HPE Integrated Lights-Out) 4GB NAND, Firmware HPE iLO4 2.0 - status monitoring, alerts and reports, remote management
UEFI - secure server configuration and boot in accordance with the industry standard Unified Extensible Firmware Interface (UEFI)
HPE RESTful API - application developer interface
Intelligent Provisioning - a tool for automated deployment of server infrastructure
Embedded Remote Support - built-in remote support tools that provide automatic transmission of information about hardware events to HP service departments |
| Safety | Power-on password
Keyboard password
QuickLock, Network Server Mode
Serial interface control
Administrator's password
iLO 4 (Integrated Lights-Out 4) with 12 customizable user accounts and SSL encryption
iLO 4 disabled mode
iLO Advanced supports directory services integration
TPM 1.2
UEFI |
| BIOS | HPE Server Unified Extensible Firmware Interface (UEFI) / Legacy BIOS Boot Mode |
| Dimensions | Height 4.32 cm, Width 43.47 cm, Depth 69.85 cm |
| Weight | Minimum 12 kg, maximum 15 kg |
| Power supply | 100/240 VAC, 6.7/3.3 A, 50/60 Hz |
| Operating Environment | Operating temperature from +10°C to +35°C
Storage temperature from -30°C to +60°C
Humidity no more than 90% |
| Noise level | Idle - 29 dBa (1P) / 37 dBa (2P)
Under load - 30 dBa (1P) / 46 dBa (2P) |
| Warranty | HP Standard 3-Year 9x5 Onsite Warranty with Next Business Day Response Time |