| Characteristic |
Description |
 | |
| Base Configuration | HPE ProLiant DL580 Gen9, part number 816817-B21 |
| Form Factor | 4U, rack mountable |
| CPU | 2 Intel Xeon E7-4809 v4 processors: 8 cores, 25MB L3 cache, 2.1GHz operating frequency, 3 QPI 6.4GT/s channels
Maximum number of processors per server - 4, up to 64 logical CPUs per system with Intel Hyper-Threading technology
Maximum supported RAM frequency 1866 MHz (limited by processor) |
| Chipset | Intel C602J Chipset |
| RAM | Preinstalled 64 GB memory: 4 x HPE 16 GB (1x16 GB) Single Rank x4 DDR4-2400 CAS-17-17-17 Registered Memory Kit
Two memory cartridges (one cartridge per processor, two memory modules per cartridge)
Supported memory types: HPE SmartMemory DDR4 Load Reduced DIMM (LRDIMM), DDR4 Registered DIMM (RDIMM)
Maximum RAM: 6,144 GB (96 x 64 GB) for LRDIMM, 3,072 GB (96 x 32 GB) for RDIMM (for 4 CPUs)
Quad-channel memory controller integrated into CPU: 96 slots per server, 24 slots per CPU, 6 modules per channel
Maximum: 2 memory cartridges per CPU, 12 memory modules per cartridge, 8 cartridges total, 96 memory modules
Minimum: 2 CPUs, one cartridge per CPU, 2 memory modules per cartridge, 2 cartridges total, 4 memory modules
Memory operating frequency 1866 MHz (limited by the processor)
Maximum memory subsystem bandwidth 102.4 GB/s per processor
Support for HPE SmartMemory, Advanced ECC, Online Spare technologies |
| Disk subsystem | Up to 5 Hot Plug 2.5" SFF SAS/SATA HDD/SSD hot swap drives
Optional:
5 Hot Plug 2.5" SFF SAS/SATA HDD/SSD hot swap drive cage (10 drives total)
OR
5 2.5" SFF NVMe SSD drive cage (10 drives total)
Installed drives: none |
| Disk subsystem controller | Integrated RAID-controller HPE Smart Array P830i/2GB FBWC 12Gb SAS Controller (RAID 1/10/5/50/6/60) 16 Ports Internal
16 ports SAS 12Gb/s, support for RAID 0/1/10/5/50/6/60 (Hardware RAID), 2GB FBWC Memory, support for HBA Mode
Controller cache protection battery
Additional:
HBA-adapter HPE H241 12Gb SAS Smart Host Bus Adapter (RAID 0/1/10/5) 8 Ports External
RAID-controller HPE Smart Array P441/4GB FBWC 12Gb SAS Controller (RAID 1/10/5/50/6/60) 8 Ports External
RAID-controller HPE Smart Array P841/4GB FBWC 12Gb SAS Controller (RAID 1/10/5/50/6/60) 16 Ports External |
| Network controller | HPE FlexFabric FlexibleLOM Adapter 1 GbE 4-port 331FLR I/O Module
1GbE management port (Dedicated iLO connector)
Additional up to 9 network cards in expansion slots |
| Expansion slots | Slot 1 PCIe 3.0 x16/x16 Full Length / Full Height connection to CPU4 (Double Width)
Slot 2 PCIe 3.0 x16/x16 Full Length / Full Height connection to CPU4 (Double Width)
Slot 3 PCIe 3.0 x16/x16 Full Length / Full Height connection to CPU3
Slot 4 PCIe 3.0 x8/x16 Full Length / Full Height connection to CPU3
Slot 5 PCIe 3.0 x8/x16 Full Length / Full Height connection to CPU3
Slot 6 PCIe 3.0 x16/x16 Full Length / Full Height connection to CPU2
Slot 7 PCIe 3.0 x8/x16 Full Length / Full Height connection to CPU2
Slot 8 PCIe 3.0 x8/x16 Full Length / Full Height connection to CPU2
Slot 9 PCIe 3.0 x16/x16 Full Length / Full Height connection to CPU1 |
| Optical storage | External USB optical drive DVD-RW (optional) |
| Interfaces | Front: 2 x USB 2.0, DB-15 video
Rear: 4 x USB 2.0, DB-15 video, 4 x 1GbE RJ-45, 1GbE RJ-45 management, serial
Internal Ports: Micro SD Slot, 2 x USB 2.0 |
| Compliance with industry standards | ACPI 2.0. Compliant
PCIE 3.0 Compliant
PXE Support
WOL Support
Physical Address Extension (PAE) Support
Microsoft® Logo certifications
USB 2.0 Support
ASHRAE A3/A4 |
| Video adapter | Integrated Matrox G200 video standard, 1280 x 1024 (32 bpp), 1920 x 1200 (16 bpp)
HPE NVIDIA Quadro M6000 Graphics Accelerator (up to 4 cards)
HPE NVIDIA Tesla K40C 12GB Computational Accelerator (up to 4 cards) |
| Power Unit | 2 x HPE 1200W Hot-Swap Redundant Platinum Plus (94%)
Maximum of 4 x 1200W PSUs |
| Cooling | 4 dual-rotor hot-swappable, redundant system fans |
| Supported Operating Systems | Microsoft Windows Server
Red Hat Enterprise Linux (RHEL)
SUSE Linux Enterprise Server (SLES)
VMware
CentOS
Oracle Linux |
| Rack mount installation | Slide-out rail kit
Cable organizer |
| Built-in controls | HPE iLO Advanced (HPE Integrated Lights-Out) 4GB NAND, Firmware HPE iLO4 2.3 - status monitoring, alerts and reports, remote management
UEFI - secure server configuration and boot in accordance with the industry standard Unified Extensible Firmware Interface (UEFI)
HPE RESTful API - application developer interface
Intelligent Provisioning - a tool for automated deployment of server infrastructure
Embedded Remote Support - built-in remote support tools that provide automatic transmission of information about hardware events to HP service departments |
| Safety | Power-on password
Keyboard password
External USB port enable/disable
Network Server Mode
Serial interface control
Administrator's password
Trusted Platform Module (TPM)
Intel® Secure Key
HPE Secure Encryption (Smart Array Controller)
HPE Advanced Data Guard (Smart Array Controller) |
| BIOS | HPE Server Unified Extensible Firmware Interface (UEFI) |
| Dimensions | Height 17.5 cm, Width 44.4 cm, Depth 73.6 cm |
| Weight | Minimum 32 kg, maximum 53 kg |
| Power supply | 100/240 VAC, 8.3/6.6A, 50/60 Hz |
| Operating Environment | Operating temperature from +10°C to +35°C
Storage temperature from -30°C to +60°C
Humidity no more than 90% |
| Noise level | Idle - 68 dBa
Under load - 69 dBa |
| Warranty | HP Standard 3-Year 9x5 Onsite Warranty with Next Business Day Response Time |