| Characteristic |
Description |
 | |
| Base Configuration | HPE ProLiant ML110 Gen10
HPE ProLiant ML110 Gen10 8SFF Configure-to-order Server 872309-B21 Base Platform |
| Form Factor | Pedestal (4.5U)
Can be converted to rack (requires mounting kit) |
| CPU | 1 2nd Generation Intel Xeon Scalable processor
Maximum number of processors per server - 1
RAM frequency supported by processor: 2133/2400M/2667/2933 MT/s depending on processor model |
| Chipset | Intel C621 Series Chipset |
| RAM | Pre-installed memory 16GB: no
Supported memory types:
HPE SmartMemory DDR4 Registered DIMM (RDIMM) - up to 6 modules
Maximum RAM 192GB (6x32GB) for RDIMM
Six-channel memory controller integrated into the CPU: 6 slots per server, 1 module per channel
Memory operating frequency 2400MHz (limited by the processor)
Maximum memory subsystem bandwidth 115.2 GB/s per processor
Support for HPE SmartMemory, Advanced ECC, Online Spare technologies |
| Disk subsystem | Up to 8 Hot Plug 2.5" SFF SATA/SAS HDD/SSD hot-swappable drives (additional controller required for SAS)
Maximum of 16 Hot Plug 2.5" SFF SATA/SAS HDD/SSD drives when installing an additional 8-drive cage (additional controller required).
(Additional controller required.)
An optional port expander is required to connect more than 8 drives to the E208i/P408i controller. |
| Disk subsystem controller | Integrated RAID controller HPE Smart Array Embedded Software RAID S100i SR Controller
10 ports SATA 6Gb/s, support for RAID 0/1/10/5
Additional:
HBA-adapter HPE H241 12Gb SAS Smart Host Bus Adapter (RAID 0/1/10/5) 8 Ports External
RAID-controller HPE Smart Array E208e-p SR Gen10 (8 Ext Lanes/No Cache) 12G SAS PCIe Plug-in Controller
RAID-controller HPE Smart Array P408e-p SR Gen10 (8 Ext Lanes/4GB Cache) 12G SAS PCIe Plug-in Controller
RAID-controller HPE Smart Array E208i-p SR Gen10 (8 Int Lanes/No Cache) 12G SAS PCIe Plug-in Controller
RAID controller HPE Smart Array P408i-p SR Gen10 (8 Int Lanes/2GB Cache) 12G SAS PCIe Plug-in Controller
Controller cache protection battery
Port expander for connecting up to 16 drives to Smart Array controllers. |
| Network controller | Integrated Network Adapter HPE 332i 2 ports 1Gb Ethernet RJ45
Additional network cards in expansion slots (5 expansion slots)
Management port 1GbE (Dedicated iLO connector) |
| Expansion slots | 1 slot - PCIe 3.0 x16/x16 Full Height 3/4 Length, CPU
2 slot - PCIe 3.0 x4/x8 Full Height Half Length, CPU
3 slot - PCIe 3.0 x8/x8 Full Height Half Length, CPU
4 slot - PCIe 3.0 x16/x16 Full Height Full Length, CPU
5 slot - PCIe 3.0 x4/x8 Full Height Half Length, PCH |
| Optical storage | Optional:
One HPE 9.5mm SATA DVD-ROM JackBlack Gen9 Optical Drive OR
One HPE 9.5mm SATA DVD-RW JackBlack Gen9 Optical Drive |
| Interfaces | On the front panel: 2 USB 3.0 ports, iLO Service Port
On the rear panel: 2 USB 3.0 ports, 2 USB 2.0 ports, DB-15 video connector, 2 GbE RJ-45 ports, RJ-45 management port, COM-port (optional)
Internal ports: Micro SD Slot, USB 3.0 port, USB 2.0 port |
| Video adapter | Integrated Matrox G200eH2 video standard, 1280 x 1024 (32 bpp), 1920 x 1200 (16 bpp) |
| Power Unit | 1 or 2 HPE 500/800W hot-swap redundant power supplies |
| Cooling | 1 x non-hot-swappable, non-redundant system fan
1 x non-hot-swappable, non-redundant fan for expansion card area
Optional hot-swappable, redundant fan kit. |
| Supported Operating Systems | Microsoft Windows Server
Red Hat Enterprise Linux (RHEL)
SUSE Linux Enterprise Server (SLES)
VMware
ClearOS |
| Rack mount installation | Rack mountable (requires mounting kit) |
| Built-in controls | HPE iLO (HPE Integrated Lights-Out) 4GB NAND, Firmware HPE iLO5 - status monitoring, alerts and reports, remote management
UEFI - secure server configuration and boot in accordance with the industry standard Unified Extensible Firmware Interface (UEFI)
HPE RESTful API - application developer interface
Intelligent Provisioning - a tool for automated deployment of server infrastructure
Embedded Remote Support - built-in remote support tools that provide automatic transmission of information about hardware events to HP service departments |
| BIOS | HPE Server Unified Extensible Firmware Interface (UEFI) |
| Dimensions | Height 44.0 cm, Width 19.5 cm, Depth 48.05 cm |
| Weight | Minimum 13 kg, maximum 25 kg (depending on configuration) |
| Power supply | 100/240 VAC, 6.7/3.3 A, 50/60 Hz |
| Operating Environment | Operating temperature from +10°C to +35°C
Storage temperature from -30°C to +60°C
Humidity no more than 90% |
| Noise level | Idle - 24.8 dBA
Under load - 25.1 dBA |
| Warranty | 1 year warranty, service center |