| Characteristic |
Description |
 | |
| Base Configuration | HPE ProLiant ML350 Gen10, part number 877620-421 |
| Form Factor | Pedestal, convertible for rack mounting (5U height) |
| CPU | Intel Xeon Bronze 3106 processor: 8 cores, 11MB L3 cache, 1.7GHz operating frequency, 2 UPI channels 9.6GT/s
Maximum number of processors per server - 2, 16 logical CPUs per system (Hyper-Threading technology is not supported)
Maximum RAM frequency supported by the processor is 2133MHz |
| Chipset | Intel C621 Series Chipset |
| RAM | Preinstalled 16GB memory: 1 HPE 16GB Single Rank x4 DDR4-2666 CAS-19-19-19 Registered Memory Kit
Supported memory types:
HPE SmartMemory DDR4 Registered DIMM (RDIMM) - up to 24 modules
HPE SmartMemory DDR4 Load Reduced DIMM (LRDIMM) - up to 24 modules
Maximum RAM 1536GB (24x64GB) for LRDIMM, 768GB (24x32GB) for RDIMM
Six-channel memory controller integrated into the CPU: 24 slots per server, 12 slots per CPU, 2 slots per channel
Memory operating frequency 2133MHz (limited by the processor)
Maximum memory subsystem bandwidth 102.4 GB/s per processor
Support for HPE SmartMemory, Advanced ECC, Online Spare technologies |
| Disk subsystem | Up to 4 Hot Plug 3.5" LFF SATA/SAS HDD/SSD hot-swap drives (SAS requires additional controller)
Optional:
1 or 2 x 4 Hot Plug 3.5" LFF SATA/SAS HDD/SSD cages each
Maximum 12 Hot Plug 3.5" LFF SATA/SAS HDD/SSD hot-swap drives per server
Additional Storage:
- Up to two fixed-install M.2 SATA Flash drives (requires HPE Universal SATA HHHL 3yr Wty M.2 Kit)
- Fixed-install MicroSD Flash drive
- Fixed-install internal USB drive
- PCIe SSD accelerators
Pre-installed Storage: None |
| Disk subsystem controller | Integrated RAID controller HPE Smart Array Embedded Software RAID S100i SR Controller
14 SATA 6Gb/s ports, RAID 0/1/10/5 support (Software RAID), Zero Memory, 2 ports are used for M.2 drives in the Riser card (optional)
Additionally in the connector on the motherboard:
RAID module HPE Smart Array E208i-a SR Gen10 ( 8 Int Lanes/No Cache) 12G SAS Modular Controller, RAID 0/1/10/5/JBOD
RAID module HPE Smart Array P408i-a SR Gen10 ( 8 Int Lanes/2GB Cache) 12G SAS Modular Controller, RAID 0/1/10/5/50/6/60/JBOD
RAID-module HPE Smart Array P816i-a SR Gen10 (16 Int 4GB Cache+Smart) 12G SAS Modular Controller, RAID 0/1/10/5/50/6/60/JBOD, Smart Cache
Additionally in PCIe slots:
Raid-controller HPE Smart Array E208i-p SR Gen10 (8 Int Lanes/No Cache) 12G SAS PCIe Plug-in Controller, RAID 0/1/10/5/JBOD
Raid-controller HPE Smart Array E208e-p SR Gen10 (8 Ext Lanes/No Cache) 12G SAS PCIe Plug-in Controller, RAID 0/1/10/5/JBOD
HPE Smart Array Raid Controller P408i-p SR Gen10 ( 8 Int Lanes/2GB Cache) 12G SAS PCIe Plug-in Controller, RAID 0/1/10/5/50/6/60/JBOD
HPE Smart Raid Controller Array P408e-p SR Gen10 (8 Ext Lanes/4GB Cache) 12G SAS PCIe Plug-in Controller, RAID 0/1/10/5/50/6/60/JBOD |
| Network controller | Integrated Network Controller HPE Ethernet 1Gb 4-port 369i Adapter
Management port 1GbE (Dedicated iLO connector) |
| Expansion slots | With one processor:
- Slot 1 PCIe 3.0 x16/x16 Full Length/Full Height Slot connection to CPU1
- Slot 2 PCIe 3.0 x4/x8 Full Length/Full Height Slot connection to CPU1
- Slot 3 PCIe 3.0 x16/x16 Full Length/Full Height Slot connection to CPU1
- Slot 4 PCIe 3.0 x4/x8 Full Length/Full Height Slot connection to CPU1
When installing a second processor:
- Slot 5 PCIe 3.0 x16/x16 Full Length/Full Height Slot connection to CPU2
- Slot 6 PCIe 3.0 x8/x8 Full Length/Full Height Slot connection to CPU2
- Slot 7 PCIe 3.0 x16/x16 Full Length/Full Height Slot connection to CPU2
- Slot 8 PCIe 3.0 x8/x8 Full Length/Full Height Slot connection to CPU2 |
| Optical storage | DVD-RW or DVD-ROM Drive (optional)
When installing an optical drive, adding a 3rd drive cage to Box-1 is not possible
HPE Mobile USB Non Leaded System DVD RW Drive (optional) |
| Interfaces | Front: 2 x USB 3.0, iLO Service Port
Rear: 2 x USB 3.0, DB-15 Video, Display Port, 4 x GbE RJ-45, 1GbE RJ-45 Management Port, Serial Port
Internal Ports: Micro SD Slot, 1 x USB 3.0, 1 x USB 2.0 |
| Video adapter | Integrated Matrox G200 video standard, 1280 x 1024 (32 bpp), 1600 x 1200 (16 bpp)
Up to four HPE NVIDIA Quadro Graphics Accelerator GPUs |
| Power Unit | x HPE 500W Hot-Swappable Power Supply, Platinum (94%)
Optional for a second 500W hot-swappable power supply with redundancy |
| Cooling | non-redundant managed system fans
Requires installation of a hot-swap fan kit (HPE ML350 Gen10 Redundant Fan Cage Kit with 4 Fan Modules)
in the following cases:
- when installing three drive cages;
- when installing NVMe drives;
- when installing two drive cages and any additional devices in Box-1;
- when installing a second processor;
- when installing SAS 10K or larger drives;
- when installing M.2 drives;
- when installing HPE Ethernet 10Gb 2-port 521T Adapter or 25 Gigabit Ethernet adapters;
- when installing graphics accelerators;
- when installing the server in a rack. |
| Supported Operating Systems | Windows Server 2012 R2 (Most Recent Version)
Windows Server 2016 (Most Recent Version)
VMware ESXi 6.0 U3
VMware ESXi 6.5 and U1 upon release
Red Hat Enterprise Linux (RHEL) 6.9 and 7.3
SUSE Linux Enterprise Server (SLES) 11 SP4 and 12 SP2
ClearOS |
| Rack mount installation | Rack Mount Kit with Slide-out Rails and Cable Management (Optional) |
| Built-in controls | HPE iLO (HPE Integrated Lights-Out) 4GB NAND, Firmware HPE iLO5 - status monitoring, alerts and reports, remote management
UEFI - secure server configuration and boot in accordance with the industry standard Unified Extensible Firmware Interface (UEFI)
HPE RESTful API - application developer interface
Intelligent Provisioning - a tool for automated deployment of server infrastructure
Embedded Remote Support - built-in remote support tools that provide automatic transmission of information about hardware events to HP service departments |
| BIOS | HPE Server Unified Extensible Firmware Interface (UEFI) |
| Dimensions | Height 46.25 cm, Width 17.4 cm, Depth 64.8 cm (Pedestal)
Height 21.85 cm, Width 44.5 cm, Depth 64.8 cm (When installed in a rack) |
| Weight | Minimum 21 kg, maximum 42 kg |
| Power supply | 100/240 VAC, 6.7/3.3 A, 50/60 Hz |
| Operating Environment | Operating temperature from +10°C to +35°C
Storage temperature from -30°C to +60°C
Humidity no more than 90% |
| Noise level | Idle - 28 dBA
Under load - 29 dBA |
| Warranty | 1 year warranty, service center |