| Characteristic |
Description |
 | |
| Base Configuration | HPE ProLiant DL385 Gen10, part number 878718-B21 |
| Form Factor | 2U, rack mountable |
| CPU | 1 AMD EPYC - 7301 processor: 16 cores, 64 MB L3 cache, 2.2/2.7 GHz operating frequency, 155/170 W
Maximum number of processors per server - 2
Maximum RAM frequency supported by the processor, 2666 MHz |
| Chipset | System on Chip (SoC) design |
| RAM | Preinstalled 32 GB memory: 2 HPE 16GB (1x16GB) Dual Rank x8 DDR4-2666 CAS-19-19-19 Registered Smart Memory Kit
Supported memory types:
HPE SmartMemory DDR4 Registered DIMM (RDIMM) - up to 32 modules
HPE SmartMemory DDR4 Load Reduced DIMM (LRDIMM) - up to 32 modules
Maximum RAM 4096 GB (32x128 GB) for LRDIMM, 1024 GB (32x32 GB) for RDIMM
Eight-channel memory controller integrated into the CPU: 32 slots per server, 16 slots per CPU, 2 modules per channel
Memory operating frequency 2400 MHz (1 DPC), 2133 MHz (2 DPC) (limited by memory type, DPC - DIMM Per Channel)
Maximum memory subsystem bandwidth of 153.6 GB/s per processor
Support for HPE SmartMemory technology |
| Disk subsystem | Installed cage (Bay-3):
Up to 8 Hot Plug 2.5" SFF SAS/SATA HDD/SSD hot-swap drives, connect to P408i-a SAS controller
Additional cages (optional in Bay-2, possible options):
Cage for 8 Hot Plug 2.5" SFF SAS/SATA HDD/SSD hot-swap drives (RAID controller or port expander required)
Cage for 8 Hot Plug 2.5" SFF SAS/SATA or 6 SAS/SATA + 2 NVMe hot-swap drives (RAID controller or port expander and riser card with 1 NVMe port required)
Cage for 8 Hot Plug 2.5" SFF NVMe hot-swap drives (4-port NVMe riser card, CPU2, High-Perf Fans)
Additional Cage (Bay-1):
2-bay Hot Plug 2.5" SFF SAS/SATA HDD/SSD or NVMe hot-swap cage (requires Universal Media bay and 1-port NVMe riser card)
8-bay Hot Plug 2.5" SFF SAS/SATA HDD/SSD hot-swap cage (requires RAID controller or port expander)
8-bay Hot Plug 2.5" SFF SAS/SATA or 6 SAS/SATA + 2 NVMe hot-swap cage (requires RAID controller or port expander and 1-port NVMe riser card)
8-bay Hot Plug 2.5" SFF NVMe hot-swap cage (requires 4-port NVMe riser card, CPU2, High-Perf Fans)
Additional rear panel cages:
Cage for 2 Hot Plug 2.5" SFF SAS/SATA HDD/SSD drives with hot swap (in Riser Card bays 1, 2 and 3)
Total up to 24 2.5" SFF SAS/SATA drives in the front, including up to 16 NVMe drives.
Additional up to 6 2.5" SFF SAS/SATA drives in rear panel cages.
Installed drives: none |
| Disk subsystem controller | HPE Smart Array P408i-a SR Gen10 RAID Module (8 Int Lanes/2GB Cache) 12G SAS Modular Controller
8 SATA/SAS 12Gb/s ports, RAID 0/1/10/5/50/6/60 support, 2GB Cache Memory, battery included (installed in a slot on the server motherboard)
Integrated S100i controller with support for two M.2 SATA ports
Controller options with installation in a slot on the motherboard:
HPE Smart Array P816i-a SR Gen10 RAID Module (16 Int 4GB Cache+Smart) 12G SAS Modular Controller, RAID 0/1/10/5/50/6/60/JBOD, Smart Cache
Additional in slots PCIe:
HPE Smart Array E208i-p SR Gen10 Raid Controller ( 8 Int Lanes/No Cache) 12G SAS PCIe Plug-in Controller, RAID 0/1/10/5/JBOD
HPE Smart Array E208e-p SR Gen10 Raid Controller ( 8 Ext Lanes/No Cache) 12G SAS PCIe Plug-in Controller, RAID 0/1/10/5/JBOD
HPE Smart Array Raid Controller P408i-p SR Gen10 ( 8 Int Lanes/2GB Cache) 12G SAS PCIe Plug-in Controller, RAID 0/1/10/5/50/6/60/JBOD
HPE Smart Raid Controller Array P408e-p SR Gen10 (8 Ext Lanes/4GB Cache) 12G SAS PCIe Plug-in Controller, RAID 0/1/10/5/50/6/60/JBOD
Raid controller HPE Smart Array P824i-p MR Gen10 (24 Int 4GB C+CacheCade) 12G SAS PCIe Plug-in Controller, RAID 0/1/10/5/50/6/60/JBOD
Port expander for 24 ports 12Gb SAS/SATA with installation in a PCIe slot. |
| Network controller | Integrated network controller HPE Ethernet 1Gb 4-port 331i Adapter
1GbE management port (Dedicated iLO connector)
Optional FlexibleLOM Adapter replaceable I/O module
Optional network adapters in PCIe slots |
| Expansion slots | Two bays for installing riser cards,
Possible riser card options for the Riser-1 bay (connection to CPU1):
- Riser card for 3 PCIe 3.0 slots: x8 FHHL, x16 FHFL, x8 FHHL, 2 M.2 ports (installed by default);
- Riser card for 3 PCIe 3.0 slots: x8 FHHL, x8 FHHL, x8 FHHL, 1 port for connecting 2 NVMe drives;
- Riser card for 2 PCIe 3.0 slots: x16 FHFL, x16 FHFL (slots 1 and 2);
- Riser card for 2 PCIe 3.0 slots: x16 FHFL, x16 FHFL (slots 2 and 3, for double-width GPUs);
- 4-port riser card for connecting up to 8 NVMe drives in a cage in Box-2;
Possible riser card options for the Riser-2 bay (connection to CPU2, requires a second processor):
- Riser card for 3 PCIe 3.0 slots: x8 FHHL, x16 FHFL, x8 FHHL;
- Riser card for 3 PCIe 3.0 slots: x8 FHHL, x8 FHHL, x8 FHHL, 1 port for connecting 2 NVMe drives in a cage in Universal Media Bay;
- Riser card for 2 PCIe 3.0 slots: x16 FHFL, x16 FHFL (slots 1 and 2);
- Riser card for 2 PCIe 3.0 slots: x16 FHFL, x16 FHFL (slots 2 and 3, for double-width GPUs);
- 4-port riser card for connecting up to 8 NVMe drives in a basket in the Box-1 compartment; |
| Optical storage | DVD-RW or DVD-ROM Drive (optional, requires Universal Media bay)
HPE Mobile USB Non Leaded System DVD RW Drive (optional) |
| Interfaces | On the front panel: 1 USB 3.0 port, iLO Front Service Port. Additionally, when installing Universal Media Bay: Display Port, 2 USB 2.0 connectors.
On the rear panel: 2 USB 3.0 ports, DB-15 video connector, 4 GbE RJ-45 ports, 1GbE RJ-45 management port, serial port (optional).
Internal ports: Micro SD Slot, 2 USB 3.0 ports. |
| Video adapter | Integrated Matrox G200 video standard, 1280 x 1024 (32 bpp), 1920 x 1200 (16 bpp)
Up to 5 additional video cards or graphic accelerators. |
| Power Unit | x 500W Platinum-level power supply (94%)
Additional second power supply for redundancy with hot-swappable capability |
| Cooling | 4 hot-swappable, redundant, managed system fans on 1-socket configurations
6 hot-swappable, redundant, managed system fans on 2-socket configurations
Optional: High-Performance Cooling (required on configurations with NVMe drives or GPUs) |
| Supported Operating Systems | Windows Server 2012 R2 (Most Recent Version)
Windows Server 2016 (Most Recent Version)
VMware ESXi 6.5 and U1 upon release
Red Hat Enterprise Linux (RHEL) 7.4
SUSE Linux Enterprise Server (SLES) 12 SP3 |
| Rack mount installation | HPE 2U Small Form Factor Easy Install Rail Kit with Cable Organizer
Optional:
- HPE 2U LFF Ball Bearing Rail Kit
- Cable Organizer for Slide-out Rails
- Front Bezel Tamper-Proof Cover |
| Built-in controls | HPE iLO (HPE Integrated Lights-Out) 4GB NAND, Firmware HPE iLO5 - status monitoring, alerts and reports, remote management
UEFI - secure server configuration and boot in accordance with the industry standard Unified Extensible Firmware Interface (UEFI)
HPE RESTful API - application developer interface
Intelligent Provisioning - a tool for automated deployment of server infrastructure
Embedded Remote Support - built-in remote support tools that provide automatic transmission of information about hardware events to HP service departments |
| BIOS | HPE Server Unified Extensible Firmware Interface (UEFI) |
| Dimensions | Height 8.73 cm, Width 44.55 cm, Depth 67.94 cm |
| Weight | Minimum 15 kg, maximum 23 kg |
| Power supply | 100/240 VAC, 6.7/3.3 A, 50/60 Hz |
| Operating Environment | Operating temperature from +10°C to +35°C
Storage temperature from -30°C to +60°C
Humidity no more than 90% |
| Noise level | Idle - 31 dBa
Under load - 31 dBa |
| Warranty | HP Standard 3-Year 9x5 Onsite Warranty with Next Business Day Response Time |