| Characteristic |
Description |
 | |
| Base Configuration | HPE ProLiant ML350 Gen9, part number K8K00A |
| Form Factor | Pedestal, convertible for rack mounting (5U height) |
| CPU | Intel Xeon E5-2620 v3 processor: 6 cores, 15MB L3 cache, 2.4GHz operating frequency, 2 QPI 8.0GT/s channels
Maximum number of processors per server - 2, 24 logical CPUs per system with Intel Hyper-Threading technology
Maximum supported RAM frequency 1866MHz |
| Chipset | Intel C610 Series Chipset |
| RAM | Preinstalled memory 16 GB: 2 modules HPE 8GB (1x 8GB) Single Rank x4 DDR4-2133 CAS-15-15-15 Registered Memory Kit
Supported memory types: HPE SmartMemory DDR4 Load Reduced DIMM (LRDIMM), DDR4 Registered DIMM (RDIMM)
Maximum RAM 768 GB (24x32 GB) for LRDIMM, 384 GB (24x16 GB) for RDIMM
Quad-channel memory controller integrated into the CPU: 24 slots per server, 12 slots per CPU, 3 modules per channel
Memory operating frequency 1866 MHz (limited by the processor, when installing three modules in a 1600 MHz channel)
Maximum memory subsystem bandwidth 59.7 GB / s at processor
Support for HPE SmartMemory, Advanced ECC, Online Spare technologies |
| Disk subsystem | Up to 8 Hot Plug 2.5" SFF SAS/SATA hot-swap HDD/SSDs
Installed Drives: 3 x HPE 300GB 6G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive
Optional:
5 cages with 8 Hot Plug 2.5" SFF SAS/SATA hot-swap HDD/SSDs each
Maximum 48 Hot Plug 2.5" SFF drives per server |
| Disk subsystem controller | RAID-controller HPE Smart Array P440ar/2GB FBWC 12Gb SAS Controller
8 ports (2 x 4) SAS 12 Gb/s, support for RAID 0/1/10/5/50/6/60 (Hardware RAID), 2GB FBWC, support for HBA Mode
Additionally:
HBA-adapter HPE H240 12Gb SAS Smart Host Bus Adapter (RAID 0/1/10/5) 8 Ports Internal
HBA-adapter HPE H241 12Gb SAS Smart Host Bus Adapter (RAID 0/1/10/5) 8 Ports External
RAID-controller HPE Smart Array P440/4GB FBWC 12Gb SAS Controller (RAID 1/10/5/50/6/60) 8 Ports Internal
RAID-controller HPE Smart Array P441/4GB FBWC 12Gb SAS Controller (RAID 1/10/5/50/6/60) 8 Ports External
RAID Controller HPE Smart Array P840/4GB FBWC 12Gb SAS Controller (RAID 1/10/5/50/6/60) 16 Ports Internal |
| Network controller | Integrated Network Controller HPE Ethernet 1Gb 4-port 331i Adapter
Management port 1GbE (Dedicated iLO connector) |
| Expansion slots | Slot 1 PCIe 3.0 x8/x16 Full Length/Full Height Slot connection to CPU1
Slot 2 PCIe 3.0 x4/x8 Full Length/Full Height Slot connection to CPU1
Slot 3 PCIe 3.0 x16/x16 Full Length/Full Height Slot connection to CPU1
Slot 4 PCIe 3.0 x4/x8 Full Length/Full Height Slot connection to CPU1
Slot 5 PCIe 2.0 x4/x8 Half Length/Full Height Slot connection to CPU2
Slot 6 PCIe 3.0 x16/x16 Full Length/Full Height Slot connection to CPU2
Slot 7 PCIe 3.0 x4/x8 Full Length/Full Height Slot connection to CPU2
Slot 8 PCIe 3.0 x16/x16 Full Length/Full Height Slot connection to CPU2
Slot 9 PCIe 3.0 x4/x8 Full Length/Full Height Slot connection to CPU2 |
| Optical storage | DVD-RW optical drive |
| Interfaces | Front: 2 x USB 2.0
Rear: 2 x USB 3.0, 2 x USB 2.0, DB-15 Video, 4 x GbE RJ-45, 1 x GbE RJ-45 Management, Serial (optional)
Internal Ports: Micro SD Slot, 1 x USB 3.0, 1 x USB 2.0 |
| Compliance with industry standards | ACPI 2.0b Compliant
PCIe 3.0 Compliant
PXE Support
WOL Support
Novell Certified
IPMI 2.0, SMASH CLP, DCMI 1.0 compliant
Microsoft® Logo certifications
USB 3.0 Support
SMBIOS 2.7.1
ASHRAE A3/A4
Energy Star |
| Video adapter | Integrated Matrox G200 video standard, 1280 x 1024 (32 bpp), 1600 x 1200 (16 bpp)
Up to four HPE NVIDIA Quadro Graphics Accelerator GPUs |
| Power Unit | 2 x HPE 500W Hot-Swappable Redundant Power Supplies, Platinum-level (94%)
Up to four 500W Hot-Swappable Redundant Power Supplies can be installed |
| Cooling | hot-swappable, non-redundant, managed system fans on 1-CPU configurations
4 hot-swappable, non-redundant, managed system fans on 2-CPU configurations
Additional 4 fans for redundancy (optional) |
| Supported Operating Systems | Microsoft Windows Server
Canonical Ubuntu
Red Hat Enterprise Linux (RHEL)
SUSE Linux Enterprise Server (SLES)
VMware
Citrix XenServer |
| Rack mount installation | Rack Mount Kit (Optional)
Front Panel Tamper-Proof Cover (Optional, Rack Mount Version) |
| Built-in controls | HPE iLO (HPE Integrated Lights-Out) 4GB NAND, Firmware HPE iLO4 2.0 - status monitoring, alerts and reports, remote management
UEFI - secure server configuration and boot in accordance with the industry standard Unified Extensible Firmware Interface (UEFI)
HPE RESTful API - application developer interface
Intelligent Provisioning - a tool for automated deployment of server infrastructure
Embedded Remote Support - built-in remote support tools that provide automatic transmission of information about hardware events to HP service departments |
| Safety | Power-on password
Keyboard password
QuickLock, Network Server Mode
Serial interface control
Administrator's password
iLO 4 (Integrated Lights-Out 4) with 12 customizable user accounts and SSL encryption
iLO 4 disabled mode
iLO Advanced supports directory services integration
TPM 1.2
UEFI |
| BIOS | HPE Server Unified Extensible Firmware Interface (UEFI) / Legacy BIOS Boot Mode |
| Dimensions | Height 46.4 cm, Width 21.9 cm, Depth 76.9 cm (Pedestal)
Height 21.8 cm, Width 44.5 cm, Depth 74.6 cm (When installed in a rack) |
| Weight | Minimum 26 kg, maximum 55 kg |
| Power supply | 100/240 VAC, 6.7/3.3 A, 50/60 Hz |
| Operating Environment | Operating temperature from +10°C to +35°C
Storage temperature from -30°C to +60°C
Humidity no more than 90% |
| Noise level | Idle - 21 dBa
Under load - 22 dBa |
| Warranty | HP Standard 3-Year 9x5 Onsite Warranty with Next Business Day Response Time |