| Characteristic |
Description |
 | |
| Base Configuration | HPE ProLiant DL160 Gen9, part number N1W97A |
| Form Factor | 1U, rack mountable |
| CPU | Intel Xeon E5-2620 v3 processor: 6 cores, 15MB L3 cache, 2.4GHz operating frequency, 2 QPI 8.0GT/s channels
Maximum number of processors per server - 2, 24 logical CPUs per system with Intel Hyper-Threading technology
Maximum supported RAM frequency 1866MHz |
| Chipset | Intel C610 Series Chipset |
| RAM | Preinstalled 64 GB memory: 4 modules HPE 16GB (1x16GB) Dual Rank x4 DDR4-2133 CAS-15-15-15 Registered Memory Kit
Supported memory types: HPE SmartMemory DDR4 Load Reduced DIMM (LRDIMM), DDR4 Registered DIMM (RDIMM)
Maximum RAM 512 GB (16x32 GB) for LRDIMM, 256 GB (16x16 GB) for RDIMM
Quad-channel memory controller integrated into the CPU: 16 slots per server, 8 slots per CPU, 2 modules per channel
Memory operating frequency of 1866 MHz (limited by the processor)
Maximum memory subsystem bandwidth of 59.7 GB / s per processor
Support for HPE SmartMemory, Advanced technologies ECC, Online Spare |
| Disk subsystem | Up to 4 Hot Plug 3.5" LFF SAS/SATA HDD/SSD hot swappable drives
Installed drives: 2 x HPE 2TB 6G SATA 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive |
| Disk subsystem controller | RAID controller HPE Smart Array P440/4GB FBWC 12Gb SAS Controller (RAID 1/10/5/50/6/60) 8 Ports Internal
8 ports SAS 12Gb/s, support for RAID 0/1/10/5/50/6/60 (Hardware RAID), 4GB FBWC Memory, HBA support Mode
Additional:
HPE H241 12Gb SAS Smart Host Bus Adapter (RAID 0/1/10/5) 8 Ports External
HPE Smart Array P441/4GB FBWC 12Gb SAS Controller (RAID 1/10/5/50/6/60) 8 Ports External |
| Network controller | Integrated network controller HPE Ethernet 1Gb 2-port i350 Adapter
Optional 1GbE management port (Dedicated iLO connector)
Additional network cards in expansion slots
Optional FlexibleLOM Adapter replaceable I/O module (requires replacement of Riser Card CPU#1) |
| Expansion slots | CPU#1 PCIe riser Card:
Slot 1 PCIe 3.0 x16/x16 Half Length/Full Height Slot connection to CPU1
Slot 2 PCIe 3.0 x8/x8 Low Profile Slot connection to CPU1
CPU#1 FlexibleLOM riser Card (optional):
Slot 1 PCIe 3.0 x8/x8 Flexible LOM connection to CPU1
Slot 2 PCIe 3.0 x8/x8 Low Profile Slot connection to CPU1
CPU#2 PCIe riser Card (optional):
Slot 3 PCIe 3.0 x16/x16 Low Profile Slot connection to CPU2 |
| Optical storage | HPE 9.5mm SATA DVD-RW JackBlack Gen9 Optical Drive |
| Interfaces | Rear Panel: 2 x USB 3.0, DB-15 Video Connector, 2 x GbE RJ-45, 1GbE RJ-45 Management Port (Optional)
Internal Ports: Micro SD Slot, USB 3.0 Port |
| Compliance with industry standards | ACPI 2.0b Compliant
PCIe 3.0 Compliant
PXE Support
WOL Support
Microsoft® Logo certifications
USB 3.0 Support
ASHRAE A3/A4 |
| Video adapter | Integrated Matrox G200eH2 video standard, 1280 x 1024 (32 bpp), 1920 x 1200 (16 bpp) |
| Power Unit | 2 x HPE 900W Hot-swap Redundant Power Supplies |
| Cooling | 4 hot-swappable, redundant, controllable system fans |
| Supported Operating Systems | Microsoft Windows Server
Red Hat Enterprise Linux (RHEL)
SUSE Linux Enterprise Server (SLES)
Oracle Solaris
VMware |
| Rack mount installation | HPE 1U Small Form Factor Easy Install Rail Kit
Optional:
- HPE 1U Cable Management Arm for Easy Install Rail Kit
- HPE 1U Security Bezel Kit
(requires HPE DL160 Gen9 Quick Release Ear FIO Kit) |
| Built-in controls | HPE iLO (HPE Integrated Lights-Out) 2GB NAND, Firmware HPE iLO4 2.0 - status monitoring, alerts and reports, remote management
UEFI - secure server configuration and boot in accordance with the industry standard Unified Extensible Firmware Interface (UEFI)
HPE RESTful API - application developer interface
Intelligent Provisioning - a tool for automated deployment of server infrastructure
Embedded Remote Support - built-in remote support tools that provide automatic transmission of information about hardware events to HP service departments |
| Safety | Power-on password
Serial interface control
Administrator's password
TPM 1.2
UEFI |
| BIOS | HPE Server Unified Extensible Firmware Interface (UEFI) / Legacy BIOS Boot Mode |
| Dimensions | Height 4.4 cm, Width 43.5 cm, Depth 60.8 cm |
| Weight | Minimum 10 kg, maximum 15 kg |
| Power supply | 100/240 VAC, 6.7/3.3 A, 50/60 Hz |
| Operating Environment | Operating temperature from +10°C to +35°C
Storage temperature from -30°C to +60°C
Humidity no more than 90% |
| Noise level | Idle - 34 dBa
Under load - 36 dBa |
| Warranty | HP 3-year 9x5 Standard Warranty with First Year Onsite Service, Next Business Day Response Time |