| Characteristic |
Description |
 | |
| Base Configuration | HPE ProLiant DL325 Gen10, part number P04649-B21 |
| Form Factor | 1U, rack mountable |
| CPU | AMD EPYC 7251 processor, operating frequency 2.1-2.9GHz, 8 cores, L3 cache 32MB, 120W
Maximum number of processors per server - 1
Maximum effective frequency of RAM supported by the processor, 2400MHz |
| Chipset | System on Chip (SoC) design |
| RAM | Preinstalled 16 GB memory: 1 HPE 16GB (1x16GB) Dual Rank x8 DDR4-2666 CAS-19-19-19 Registered Smart Memory Kit
Supported memory types:
HPE SmartMemory DDR4 Registered DIMM (RDIMM) - up to 16 modules
HPE SmartMemory DDR4 Load Reduced DIMM (LRDIMM) - up to 16 modules
Maximum RAM 2048 GB (16x128 GB) for LRDIMM, 512 GB (16x32 GB) for RDIMM
Eight-channel memory controller integrated into the CPU: 16 slots per server, 16 slots per CPU, 2 modules per channel
Memory operating frequency 2400 MHz (1 DPC), 2133 MHz (2 DPC) (limited by processor, DPC - DIMM Per Channel)
Maximum memory subsystem bandwidth 153.6 GB/s
Support for HPE SmartMemory technology |
| Disk subsystem | Up to 8 Hot Plug 2.5" SFF SAS/SATA HDD/SSD hot swap drives
Optional:
- Up to 2 Hot Plug 2.5" SFF SAS/SATA HDD/SSD hot swap drives in front panel cage (optional) OR
- Up to 2 Hot Plug 2.5" SFF NVMe SSD hot swap drives in front panel cage (optional)
- 2 M.2 SATA drives in cage in expansion slot
- Internal MicroSD drive in slot on system board
- Internal USB drive in slot on system board
- PCIe SSD in expansion slot |
| Disk subsystem controller | HPE Smart Array P408i-a SR Gen10 RAID Module (8 Int Lanes/2GB Cache) 12G SAS Modular Controller
Additional:
HPE Smart Array P816i-a SR Gen10 RAID Module (16 Int 4GB Cache+Smart) 12G SAS Modular Controller, RAID 0/1/10/5/50/6/60/JBOD, Smart Cache
RAID controller HPE Smart Array E208e-p 12Gb SAS Controller (RAID 1/10/5/HBA) 8 Ports External, Smart Path (opt)
RAID controller HPE Smart Array P408e-p 12Gb SAS Controller (RAID 1/10/5/50/6/60/HBA) 8 Ports Externel, Smart Path, 4GB Cache, Smart Cache (opt) |
| Network controller | Integrated HPE Ethernet Network Controller 4 ports 1Gb RJ-45
Additional FlexibleLOM Adapter I/O module
Additional network adapters in expansion slots
1GbE management port (Dedicated iLO connector) |
| Expansion slots | Riser Card 1:
Slot 1 PCIe 3.0 x16/x16 Full Length/Full Height Slot
Slot 2 PCIe 3.0 x8/x8 Low Profile Slot
Riser Card 2, optional:
Slot 3 PCIe 3.0 x16/x16 Low Profile Slot (not compatible with installed RAID module) |
| Optical storage | HPE SATA DVD-RW Optical Drive (optional)
Installation kit required |
| Interfaces | Front: 1 x USB 3.0, iLO Service Port
Rear: 2 x USB 3.0, DB-15 Video, 4 x GbE RJ-45, 1GbE RJ-45 Management, Serial (optional)
Internal Ports: Micro SD Slot, USB 3.0 |
| Video adapter | Integrated video adapter, 16MB video memory, 1920 x 1200@60Hz (32 bpp) |
| Power Unit | x 500W Platinum-level (94%) power supplies with redundancy and hot swappability
It is possible to install higher power power supplies. |
| Cooling | 5 hot-swappable, redundant, controllable system fans (dual-rotor) |
| Supported Operating Systems | Windows Server 2012 R2
Windows Server 2016
VMware ESXi 6.0 U3
VMware ESXi 6.5 and U1 upon release
Red Hat Enterprise Linux (RHEL) 6.9 and 7.3
SUSE Linux Enterprise Server (SLES) 11 SP4 and 12 SP2
ClearOS |
| Rack mount installation | HPE 1U Small Form Factor Easy Install Rail Kit
Additional:
- Cable management
- Front panel overlay with locking capability
- Chassis intrusion switch |
| Built-in controls | HPE iLO (HPE Integrated Lights-Out), Firmware HPE iLO5 - status monitoring, alerts and reports, remote management
UEFI - secure server configuration and boot in accordance with the industry standard Unified Extensible Firmware Interface (UEFI)
HPE RESTful API - application developer interface
Intelligent Provisioning - a tool for automated deployment of server infrastructure
Embedded Remote Support - built-in remote support tools that provide automatic transmission of information about hardware events to HP service departments |
| BIOS | HPE Server Unified Extensible Firmware Interface (UEFI) |
| Dimensions | Height 4.29 cm, Width 43.46 cm, Depth 61.5 cm |
| Weight | Minimum 10 kg, maximum 16 kg |
| Power supply | 100/240 VAC, 6.7/3.3 A, 50/60 Hz |
| Operating Environment | Operating temperature from +10°C to +35°C
Storage temperature from -30°C to +60°C
Humidity no more than 90% |
| Noise level | Idle - 35 dBa
Under load - 38 dBa |
| Warranty | HP Standard 3-Year 9x5 Onsite Warranty with Next Business Day Response Time |