| Characteristic |
Description |
 | |
| Base Configuration | HPE ProLiant DL360 Gen10, part number P06455-B21 |
| Form Factor | 1U, rack mountable |
| CPU | 1 Intel Xeon Gold 6130 processor: 16 cores, 22 MB L3 cache, 2.1 GHz operating frequency, 2 UPI 10.4 GT/s channels (for Dual Socket)
Maximum number of processors per server - 2, 64 logical CPUs per system (in Hyper-Threading mode)
Maximum RAM frequency supported by the processor, 2666 MHz |
| Chipset | Intel C621 Series Chipset |
| RAM | Preinstalled 64 GB memory: 2 x HPE 32GB Dual Rank x4 DDR4-2666 CAS-19-19-19 Registered Memory Kit
Supported memory types:
HPE SmartMemory DDR4 Registered DIMM (RDIMM) - up to 24 modules
HPE SmartMemory DDR4 Load Reduced DIMM (LRDIMM) - up to 24 modules
Maximum RAM 1536 GB (24x64 GB) for LRDIMM, 768 GB (24x32 GB) for RDIMM
Six-channel memory controller integrated into the CPU: 24 slots per server, 12 slots per CPU, 2 modules per channel
Memory operating frequency 2666 MHz
Maximum memory subsystem bandwidth 128 GB/s per processor
Support for HPE SmartMemory, Advanced ECC, Online Spare technologies |
| Disk subsystem | Up to 8 Hot Plug 2.5" SFF SAS/SATA HDD/SSD hot-swap drives
Additional in Universal Media Bay on the front panel (one of the following):
- 2 hot-swap SAS/SATA SFF HDD/SSD drives
- 2 hot-swap NVMe SFF drives
- 4 hot-swap M.2 SATA UFF drive cartridges
- DVD-RW or DVD-ROM + Display port & USB 2.0
- Display port + USB 2.0
Additional in bay on the rear panel in place of 1st Riser1 slot (one of the following):
- 1 hot-swap SAS/SATA SFF HDD/SSD drive
- 2 hot-swap M.2 SATA UFF drive cartridges
Optional 10-drive PCIe x4 NVMe cage |
| Disk subsystem controller | RAID module HPE Smart Array P408i-a 12Gb SAS Controller (RAID 1/10/5/50/6/60/HBA) 8 Ports Internal, Smart Path, 2GB Cache, Smart Cache
Additional:
RAID controller HPE Smart Array E208e-p 12Gb SAS Controller (RAID 1/10/5/HBA) 8 Ports External, Smart Path
RAID controller HPE Smart Array P408e-p 12Gb SAS Controller (RAID 1/10/5/50/6/60/HBA) 8 Ports External, Smart Path, 4GB Cache, Smart Cache (opt) |
| Network controller | Integrated HPE Ethernet Network Controller 4 ports 1Gb RJ-45
Additional FlexibleLOM Adapter I/O module
1GbE management port (Dedicated iLO connector) |
| Expansion slots | Riser Card 1 (CPU1):
Slot 1 PCIe 3.0 x16/x16 3/4 Length/Full Height Slot connection to CPU1
Slot 2 PCIe 3.0 x8/x8 Low Profile Slot connection to CPU1
Optional Riser Card 1 with 2 M.2 2280 SATA ports:
Slot 1 PCIe 3.0 x16/x16 3/4 Length/Full Height Slot connection to CPU1
Slot 2 PCIe 3.0 x8/x8 Low Profile Slot connection to CPU1
Optional Riser Card 1 with 2 PCIe x4 NVMe ports (comes with a cage for 2 NVMe drives):
Slot 1 PCIe 3.0 x16/x16 3/4 Length/Full Height Slot connection to CPU1
Slot 2 PCIe 3.0 x8/x8 Low Profile Slot connection to CPU1
Riser Card 2, (CPU2), Slot 2 Riser Card 1 is not supported:
Slot 3 PCIe 3.0 x16/x16 3/4 Length/Full Height Slot connection to CPU2
Riser Card 2, optional (CPU2):
Slot 3 PCIe 3.0 x16/x16 Low Profile Slot connection to CPU2
When installing a cage for 10 PCIe x4 NVMe drives, installation of Riser Card 2 is not supported |
| Optical storage | HPE SATA DVD-RW Optical Drive (optional)
Requires installation of DVD-RW or DVD-ROM + Display port & USB 2.0 cage in the Universal Media Bay on the front panel |
| Interfaces | Front: 1 x USB 3.0, iLO Service Port, optional: Display Port, USB 2.0 port
Rear: 2 x USB 3.0, DB-15 Video Connector, 4 x GbE RJ-45, 1GbE RJ-45 Management Port, Serial Port (optional)
Internal Ports: Micro SD Slot, 2 x USB 3.0 |
| Video adapter | Integrated Matrox G200 video standard, 1280 x 1024 (32 bpp), 1920 x 1200 (16 bpp)
Up to two HPE NVIDIA Graphics Accelerator GPUs |
| Power Unit | x HPE 800W Hot-swappable Redundant Power Supplies, Platinum-level (94%) |
| Cooling | hot-swappable, redundant, controllable system fans in 1-processor configurations
7 hot-swappable, redundant, controllable system fans in 2-processor configurations
Optional: High-efficiency cooling system for operation above 35°C. |
| Supported Operating Systems | Windows Server 2012 R2
Windows Server 2016
VMware ESXi 6.0 U3
VMware ESXi 6.5 and U1 upon release
Red Hat Enterprise Linux (RHEL) 6.9 and 7.3
SUSE Linux Enterprise Server (SLES) 11 SP4 and 12 SP2
ClearOS |
| Rack mount installation | HPE 1U Small Form Factor Easy Install Rail Kit
Additional:
- Cable Organizer
- Front Panel Overlay with Locking Capability |
| Built-in controls | HPE iLO (HPE Integrated Lights-Out) 4GB NAND, Firmware HPE iLO5 - status monitoring, alerts and reports, remote management
UEFI - secure server configuration and boot in accordance with the industry standard Unified Extensible Firmware Interface (UEFI)
HPE RESTful API - application developer interface
Intelligent Provisioning - a tool for automated deployment of server infrastructure
Embedded Remote Support - built-in remote support tools that provide automatic transmission of information about hardware events to HP service departments |
| BIOS | HPE Server Unified Extensible Firmware Interface (UEFI) |
| Dimensions | Height 4.29 cm, Width 43.46 cm, Depth 70.7 cm |
| Weight | Minimum 13 kg, maximum 16 kg |
| Power supply | 100/240 VAC, 6.7/3.3 A, 50/60 Hz |
| Operating Environment | Operating temperature from +10°C to +35°C
Storage temperature from -30°C to +60°C
Humidity no more than 90% |
| Noise level | Idle - 32 dBa (1P) / 36 dBa (2P)
Under load - 35 dBa (1P) / 45 dBa (2P) |
| Warranty | 1 year warranty, service center |