| Characteristic |
Description |
 | |
| Base Configuration | HPE ProLiant DL385 Plus Gen10, part number P07595-B21 |
| Form Factor | 2U, rack mountable |
| CPU | 1 AMD EPYC 7262 processor, operating frequency 3.2-3.4GHz, 8 cores, L3 cache 128MB, 155W
Maximum number of processors per server - 2
Maximum effective RAM frequency supported by the processor, 3200 MT/s
Maximum amount of RAM supported by the processor, 4TB |
| Chipset | System on Chip (SoC) design |
| RAM | Preinstalled 16 GB memory: 1 HPE 16GB (1x 16GB) Dual Rank x8 DDR4-3200 CAS-22-22-22 Registered Smart Memory Kit
Supported memory types:
HPE SmartMemory DDR4 Registered DIMM (RDIMM) - up to 32 modules
HPE SmartMemory DDR4 Load Reduced DIMM (LRDIMM) - up to 32 modules
Maximum RAM 4096 GB (32x128 GB) for LRDIMM, 2048 GB (32x64 GB) for RDIMM
Eight-channel memory controller integrated into the CPU: 32 slots per server, 16 slots per CPU, 2 modules per channel
Memory operating frequency 3200 MT/s (1 DPC), 2933 MT/s (2 DPC), DPC - DIMM Per Channel
Maximum memory subsystem bandwidth 205 GB/s
Support for HPE SmartMemory technology |
| Disk subsystem | Installed cage:
Up to 8 Hot Plug 2.5" SFF SAS/SATA HDD/SSD hot-swappable drives, connected to E208i-a SAS controller (Bay-3)
Additional cages (optional in Bay-2, possible options):
Cage for 8 Hot Plug 2.5" SFF SAS/SATA HDD/SSD hot-swappable drives (RAID controller or port expander required)
Cage for 8 Hot Plug 2.5" SFF SAS/NVMe HDD/SSD hot-swappable drives (NVMe requires cable kit and High-Perf Fans)
Additional cages (optional in Bay-1, possible options):
Cage for 8 Hot Plug 2.5" SFF SAS/SATA HDD/SSD hot-swappable drives (RAID controller or expander required) ports)
8-slot Hot Plug 2.5" SFF SAS/NVMe HDD/SSD hot-swap cage (NVMe requires cable kit, CPU2, High-Perf Fans)
2-slot Hot Plug 2.5" SFF SAS/NVMe HDD/SSD hot-swap cage (requires Universal Media bay)
Additional rear panel cages:
2-slot Hot Plug 2.5" SFF SAS/NVMe HDD/SSD hot-swap cage (up to 2 cages in Riser Card Bays 1 and 2)
Total of 24 2.5" SFF SAS/SATA drives in front, including up to 16 NVMe drives.
Additional up to 4 2.5" SFF SAS/NVMe drives in rear panel cages.
Installed drives: none |
| Disk subsystem controller | HPE Smart Array E208i-a SR Gen10 RAID Module (8 Int Lanes/No Cache) 12G SAS Modular Controller, RAID 0/1/10/5/JBOD (installed in a slot on the server motherboard)
Integrated S100i Controller
Controller options with installation in a slot on the motherboard:
HPE Smart Array P408i-a SR Gen10 RAID Module (8 Int Lanes/2GB Cache) 12G SAS Modular Controller, RAID 0/1/10/5/50/6/60/JBOD
HPE Smart Array P816i-a SR Gen10 RAID Module (16 Int 4GB Cache+Smart) 12G SAS Modular Controller, RAID 0/1/10/5/50/6/60/JBOD, Smart Cache
Additionally in PCIe slots:
Raid controller HPE Smart Array E208i-p SR Gen10 (8 Int Lanes/No Cache) 12G SAS PCIe Plug-in Controller, RAID 0/1/10/5/JBOD
Raid controller HPE Smart Array E208e-p SR Gen10 (8 Ext Lanes/No Cache) 12G SAS PCIe Plug-in Controller, RAID 0/1/10/5/JBOD
Raid controller HPE Smart Array P408i-p SR Gen10 (8 Int Lanes/2GB Cache) 12G SAS PCIe Plug-in Controller, RAID 0/1/10/5/50/6/60/JBOD
HPE Smart Array P408e-p SR Gen10 Raid Controller (8 Ext Lanes/4GB Cache) 12G SAS PCIe Plug-in Controller, RAID 0/1/10/5/50/6/60/JBOD
Port expander for 24 ports 12Gb SAS/SATA with installation in PCIe slot (optional) |
| Network controller | Installed HPE Ethernet 1Gb 4-port BASE-T I350-T4 OCP3 Adapter Replaceable I/O Module
Additional network adapters in expansion slots
1GbE management port (Dedicated iLO management port) |
| Expansion slots | Three bays for installing riser cards,
Possible riser card options for the Riser-1 bay (connection to CPU1):
- Riser card for 3 PCIe 4.0 slots: x8 FHHL, x16 FHFL, x8 FHHL (installed by default);
- Riser card for 2 PCIe 4.0 slots: x16 FHFL, x16 FHFL (slots 1 and 2);
- Riser card for 2 PCIe 4.0 slots: x16 FHFL, x16 FHFL (slots 2 and 3, for double-width GPUs);
- Riser card for 1 PCIe 4.0 slot: x16 FHFL (additional slot 1 for riser card with slots 2 and 3)
Possible riser card options for the bay Riser-2 (connects to CPU2, requires a second processor):
- Riser card for 3 PCIe 4.0 slots: x8 FHHL, x16 FHFL, x8 FHHL;
- Riser card for 2 PCIe 4.0 slots: x16 FHFL, x16 FHFL (slots 1 and 2);
- Riser card for 2 PCIe 4.0 slots: x16 FHFL, x16 FHFL (slots 2 and 3, for double-width GPU);
- Riser card for 1 PCIe 4.0 slot: x16 FHFL (additional slot 1 for riser card with slots 2 and 3)
Possible Riser Card Options for Riser-3 (connects to CPU2, requires a second processor):
- Riser card for 2 slots PCIe 4.0: x8 FHFL, x8 FHFL;
- Riser card for 1 PCIe 4.0 slot: x16 FHFL; |
| Optical storage | DVD-RW or DVD-ROM Drive (optional, requires Universal Media bay)
HPE Mobile USB Non Leaded System DVD RW Drive (optional) |
| Interfaces | On the front panel: 1 USB 3.1 port, iLO Front Service Port.
Additional when installing Universal Media Bay: Display Port, 2 USB 2.0 connectors.
On the rear panel: 2 USB 3.1 ports, DB-15 video connector, 4 GbE RJ-45 ports, 1GbE RJ-45 management port, serial port (optional).
Internal ports: Micro SD Slot, 2 USB 3.1 ports. |
| Video adapter | Integrated Matrox G200 video standard, 1280 x 1024 (32 bpp), 1920 x 1200 (16 bpp)
Up to 5 additional video cards or graphic accelerators. |
| Power Unit | x 500W Platinum-level power supply (94%)
Additional second power supply for redundancy with hot-swappable capability |
| Cooling | hot-swappable, redundant, managed system fans on 1-socket configurations
6 hot-swappable, redundant, managed system fans on 2-socket configurations
Optional: High-Performance Cooling (required on NVMe or GPU configurations) |
| Supported Operating Systems | Windows Server 2016
Windows Server 2019
VMware ESXi 6.5 U3
VMware ESXi 6.7 U3
SUSE Linux Enterprise Server (SLES) 12 SP4
SUSE Linux Enterprise Server (SLES) 15 SP1
Red Hat Enterprise Linux (RHEL) |
| Rack mount installation | HPE DL38X Gen10 Plus 2U SFF Easy Install Rail Kit
Additional:
- Cable management
- HPE DL38X Gen10 Plus 2U SFF Ball Bearing Rail Kit
- Front panel tamper evident cover |
| Built-in controls | HPE iLO (HPE Integrated Lights-Out) 4GB NAND, Firmware HPE iLO5 - status monitoring, alerts and reports, remote management
UEFI - secure server configuration and boot in accordance with the industry standard Unified Extensible Firmware Interface (UEFI)
HPE RESTful API - application developer interface
Intelligent Provisioning - a tool for automated deployment of server infrastructure
Embedded Remote Support - built-in remote support tools that provide automatic transmission of information about hardware events to HP service departments |
| BIOS | HPE Server Unified Extensible Firmware Interface (UEFI) |
| Dimensions | Height 8.73 cm, Width 44.54 cm, Depth 71.1 cm |
| Weight | Minimum 15 kg, maximum 20 kg |
| Power supply | 100/240 VAC, 6.7/3.3 A, 50/60 Hz |
| Operating Environment | Operating temperature from +10°C to +35°C
Storage temperature from -30°C to +60°C
Humidity no more than 90% |
| Noise level | Idle - 32 dBa
Under load - 32 dBa |
| Warranty | HP Standard 3-Year 9x5 Onsite Warranty with Next Business Day Response Time |