| Characteristic |
Description |
 | |
| Base Configuration | HPE ProLiant MicroServer Gen10 Plus, article number P16006-421 |
| Form Factor | Ultra Micro Tower |
| CPU | 1 Intel Xeon E-2224 processor
4 cores, 4 threads, 8MB L3 cache, operating frequency of 3.4 - 4.6 GHz
Lithography 14 nm, TDP 71W
Maximum supported RAM frequency 2666 MT/s, DDR4-2666 ECC Unbuffered |
| Chipset | Intel C242 Chipset |
| RAM | Preinstalled memory 16 GB: 1 module HPE 16GB (1x 16GB) Dual Rank x8 DDR4-2666 CAS-19-19-19 Unbuffered Standard Memory Kit
Supported memory types: HPE Memory DDR4 Unbuffered DIMM (UDIMM)
Maximum RAM 32GB (2x16GB)
Dual-channel memory controller integrated into the CPU, 1 module per channel, 2 modules in total
Memory operating frequency 2666MHz
Maximum memory subsystem bandwidth 42.7GB/s |
| Disk subsystem | Up to 4 Non Hot Plug 3.5" LFF SATA drives with fixed installation
Installation of 2.5" SFF SATA HDD drives possible (via 2.5" -> 3.5" adapter, optional) |
| Disk subsystem controller | Integrated RAID controller HPE Smart Array S100i SR Gen10 Software RAID with 4 SATA ports (RAID 0/1/10/5, Windows only)
4 SATA 6Gb/s ports, RAID 0/1/10/5 support (Software RAID), Zero Memory Cache, HBA Mode support
Additionally:
RAID controller HPE Smart Array E208i-p SR Gen10 (8 Int Lanes/No Cache) 12G SAS PCIe Plug-in Controller (in PCIe expansion slot) |
| Network controller | Integrated network controller Embedded 1Gb 4-Port Intel i350-AM4 Controller, 4 ports RJ-45
Additional network card in the expansion slot |
| Expansion slots | Slot 1 PCIe 3.0 x16/x16 Low Profile, via riser card |
| Optical storage | Not applicable |
| Interfaces | On the front panel: 2 USB 3.2 Gen2 Type-A ports
On the rear panel:
- 4 USB 3.2 Gen1 Type-A ports
- DB-15 video connector (VGA Port)
- DisplayPort 1.0 video connector
- 4 1 GbE RJ-45 network ports
Internal ports: USB 2.0 Type-A port
Additional:
- dedicated iLO Dedicated NIC port (when installing the iLO Enablement Kit option) |
| Compliance with industry standards | ACPI V6.1 Compliant
- PCIe 3.0 Compliant
- PXE Support
- WOL Support
- EMC Class B
- Microsoft® Logo certifications
- VGA Port
- DP Port
- SMBIOS 3.1
- UEFI 2.6
- Redfish API
- IPMI 2.0
- Advanced Encryption Standard (AES)
- Triple Data Encryption Standard (3DES)
- SNMP v3
- TLS 1.2
- DMTF Systems Management Architecture for Server Hardware Command Line Protocol (SMASH CLP)
- Active Directory v1.0
- ASHRAE A2
- UEFI (Unified Extensible Firmware Interface Forum)
- USB 2.0 Compliant
- USB 3.2 Compliant
- SATA 6Gb/s |
| Video adapter | Chipset integrated graphics controller
Video connectors: 1 VGA port, 1 Display port |
| Power Unit | x 180W fixed-mount power supply without redundancy |
| Cooling | 1 x fixed-mount, non-redundant, controlled system fan |
| Supported Operating Systems | Microsoft Windows Server 2016 and 2019
Red Hat Enterprise Linux (RHEL) 7.6, 7.7, 8.0, 8.1
VMware ESXi 6.5 U3 and 6.7 U3
ClearOS |
| Rack mount installation | Not applicable |
| Built-in controls | With the optional HPE MicroServer Gen10 Plus iLO Enablement Kit installed:
- HPE iLO (HPE Integrated Lights-Out) - remote management, health monitoring, alerts and reports
- dedicated management port
- remote console with Virtual Media support |
| Dimensions | Height 11.9 cm, Width 24.5 cm, Depth 24.5 cm |
| Weight | 4.2 - 7.2 kg depending on the configuration |
| Power supply | 100/240 VAC, 2.5 A, 50/60 Hz |
| Operating Environment | Operating temperature from +10°C to +35°C
Storage temperature from -30°C to +60°C
Humidity no more than 90% |
| Noise level | Idle - 21 dBa
Under load - 21 dBa |
| Warranty | 1 year warranty, service center |