| Characteristic |
Description |
 | |
| Base Configuration | HPE ProLiant DL385 Gen10, part number P16693-B21 |
| Form Factor | 2U, rack mountable |
| CPU | AMD EPYC - 7452 processor: 32 cores, 128 MB L3 cache, 2.35/3.35 GHz operating frequency, 155/180 W
Maximum number of processors per server - 2
Maximum effective RAM frequency supported by the processor, 2933 MT/s |
| Chipset | System on Chip (SoC) design |
| RAM | Preinstalled 16 GB memory: 1 HPE 16GB (1x 16GB) Dual Rank x8 DDR4-2933 CAS-21-21-21 Registered Smart Memory Kit
Supported memory types:
HPE SmartMemory DDR4 Registered DIMM (RDIMM) - up to 32 modules
HPE SmartMemory DDR4 Load Reduced DIMM (LRDIMM) - up to 32 modules
Maximum RAM 4096 GB (32x128 GB) for LRDIMM, 2048 GB (32x64 GB) for RDIMM
Eight-channel memory controller integrated into the CPU: 32 slots per server, 16 slots per CPU, 2 modules per channel
Memory operating frequency 2933 MHz (1 DPC), 2666 MHz (2 DPC), DPC - DIMM Per Channel)
Maximum memory subsystem bandwidth 187 GB/s
Support for HPE SmartMemory technology |
| Disk subsystem | Installed cage (Bay-3) and replacement options:
8-slot Hot Plug 2.5" SFF SAS/SATA HDD/SSD hot-swap cage (installed, connected to port expander)
8-slot Hot Plug 2.5" SFF SAS/SATA or 6 SAS/SATA + 2 NVMe hot-swap cage (requires riser card with 1 NVMe port)
8-slot Hot Plug 2.5" SFF NVMe hot-swap cage (requires riser card with 4 NVMe ports)
Installed cage (Bay-2) and replacement options:
8-slot Hot Plug 2.5" SFF SAS/SATA HDD/SSD hot-swap cage (installed, connected to port expander)
8-slot cage Hot Plug 2.5" SFF SAS/SATA or 6 SAS/SATA + 2 NVMe hot-swap drives (requires riser card with 1 NVMe port)
Hot Plug 2.5" SFF NVMe hot-swap 8-drive cage (requires riser card with 4 NVMe ports)
Installed cage (Bay-1) and replacement options:
Hot Plug 2.5" SFF SAS/SATA HDD/SSD hot-swap 8-drive cage (installed, connected to port expander)
Hot Plug 2.5" SFF SAS/SATA or 6 SAS/SATA + 2 NVMe hot-swap 8-drive cage (requires riser card with 1 NVMe port)
Hot Plug 2.5" SFF NVMe hot-swap 8-drive cage (requires 4-port NVMe Riser Card, CPU2)
Additional Rear Panel Cages:
2-Slot Hot Plug 2.5" SFF SAS/SATA HDD/SSD Hot Swap Cage (in Riser Card Slots 1, 2, and 3)
Total up to 24 2.5" SFF SAS/SATA drives in front, including up to 24 NVMe drives.
Additional up to 6 2.5" SFF SAS/SATA drives in rear panel cages.
Installed Drives: None |
| Disk subsystem controller | HPE Smart Array P408i-a SR Gen10 RAID Module (8 Int Lanes/2GB Cache) 12G SAS Modular Controller
8 SATA/SAS 12Gb/s ports, RAID 0/1/10/5/50/6/60 support, 2GB Cache Memory, battery included (installed in the server motherboard slot)
Port expander for 24 12Gb SAS/SATA ports with installation in the PCIe slot.
Controller options with installation in the motherboard slot:
HPE Smart Array P816i-a SR Gen10 RAID Module (16 Int 4GB Cache+Smart) 12G SAS Modular Controller, RAID 0/1/10/5/50/6/60/JBOD, Smart Cache
Additional in slots PCIe:
HPE Smart Array E208i-p SR Gen10 Raid Controller ( 8 Int Lanes/No Cache) 12G SAS PCIe Plug-in Controller, RAID 0/1/10/5/JBOD
HPE Smart Array E208e-p SR Gen10 Raid Controller ( 8 Ext Lanes/No Cache) 12G SAS PCIe Plug-in Controller, RAID 0/1/10/5/JBOD
HPE Smart Array Raid Controller P408i-p SR Gen10 ( 8 Int Lanes/2GB Cache) 12G SAS PCIe Plug-in Controller, RAID 0/1/10/5/50/6/60/JBOD
HPE Smart Raid Controller Array P824i-p MR Gen10 (24 Int 4GB C+CacheCade) 12G SAS PCIe Plug-in Controller, RAID 0/1/10/5/50/6/60/JBOD
HPE Smart Array P408e-p SR Gen10 Raid Controller (8 Ext Lanes/4GB Cache) 12G SAS PCIe Plug-in Controller, RAID 0/1/10/5/50/6/60/JBOD |
| Network controller | HPE Ethernet FlexibleLOM Adapter 1Gb 4-port 366FLR replaceable I/O module installed
Additional network adapters in expansion slots
1GbE management port (Dedicated iLO connector) |
| Expansion slots | Three bays for installing riser cards,
Possible riser card options for the Riser-1 bay (connection to CPU1):
- Riser card for 3 PCIe 3.0 slots: x8 FHHL, x16 FHFL, x8 FHHL, 2 M.2 ports (installed by default);
- Riser card for 3 PCIe 3.0 slots: x8 FHHL, x8 FHHL, x8 FHHL, 1 port for connecting 2 NVMe drives;
- Riser card for 2 PCIe 3.0 slots: x16 FHFL, x16 FHFL (slots 1 and 2);
- Riser card for 2 PCIe 3.0 slots: x16 FHFL, x16 FHFL (slots 2 and 3, for double-width GPUs);
- 4-port riser card for connecting up to 8 NVMe drives in a cage in Box-2;
Possible riser card options for the Riser-2 bay (connection to CPU2, requires a second processor):
- Riser card for 3 PCIe 3.0 slots: x8 FHHL, x16 FHFL, x8 FHHL;
- Riser card for 3 PCIe 3.0 slots: x8 FHHL, x8 FHHL, x8 FHHL, 1 port for connecting 2 NVMe drives in a cage in Universal Media Bay;
- Riser card for 2 PCIe 3.0 slots: x16 FHFL, x16 FHFL (slots 1 and 2);
- Riser card for 2 PCIe 3.0 slots: x16 FHFL, x16 FHFL (slots 2 and 3, for double-wide GPUs);
- 4-port riser card for connecting up to 8 NVMe drives in a cage in Box-1;
Possible riser card options for Riser-3 (connection to CPU2, a second processor is required):
- Riser card for 2 PCIe 3.0 slots: x8 FHHL, x8 FHHL;
- Riser card for 1 PCIe 3.0 slot: x16 FHHL;
- 2-port NVMe riser card for connecting up to 4 NVMe drives in Box1;
- a cage for 2 SFF SAS/SATA drives can be installed instead of a riser card (HPE DL38X Gen10 2SFF Front NVMe or Front/Rear SAS/SATA Kit) |
| Optical storage | Internal optical drive not supported
HPE Mobile USB Non Leaded System DVD RW Drive (optional) |
| Interfaces | On the front panel: 1 USB 3.0 port
On the rear panel: 2 USB 3.0 ports, DB-15 video connector, 4 GbE RJ-45 ports, 1GbE RJ-45 management port, serial port (optional).
Internal ports: Micro SD Slot, 2 USB 3.0 ports. |
| Video adapter | Integrated Matrox G200 video standard, 1280 x 1024 (32 bpp), 1920 x 1200 (16 bpp)
Up to 5 additional video cards or graphic accelerators. |
| Power Unit | x 800W Platinum-level power supply (94%)
Additional second power supply for redundancy with hot-swappable capability |
| Cooling | 6 high-efficiency, redundant, hot-swappable system fans |
| Supported Operating Systems | • Windows Server 2019
• VMware ESXi 6.5 U3
• VMware ESXi 6.7 U3
• Red Hat Enterprise Linux (RHEL) 7.6
• SUSE Linux Enterprise Server (SLES) 12 SP4
• SUSE Linux Enterprise Server (SLES) 15 SP1 |
| Rack mount installation | HPE 2U Small Form Factor Easy Install Rail Kit
Additional:
- Cable management
- HPE 2U LFF Ball Bearing Rail Kit
- Cable management for ball bearing rails
- Front bezel tamper evident cover |
| Built-in controls | HPE iLO (HPE Integrated Lights-Out) 4GB NAND, Firmware HPE iLO5 - status monitoring, alerts and reports, remote management
UEFI - secure server configuration and boot in accordance with the industry standard Unified Extensible Firmware Interface (UEFI)
HPE RESTful API - application developer interface
Intelligent Provisioning - a tool for automated deployment of server infrastructure
Embedded Remote Support - built-in remote support tools that provide automatic transmission of information about hardware events to HP service departments |
| BIOS | HPE Server Unified Extensible Firmware Interface (UEFI) |
| Dimensions | Height 8.73 cm, Width 44.55 cm, Depth 67.94 cm |
| Weight | Minimum 15 kg, maximum 23 kg |
| Power supply | 100/240 VAC, 6.7/3.3 A, 50/60 Hz |
| Operating Environment | Operating temperature from +10°C to +35°C
Storage temperature from -30°C to +60°C
Humidity no more than 90% |
| Noise level | Idle - 31 dBa
Under load - 31 dBa |
| Warranty | HP Standard 3-Year 9x5 Onsite Warranty with Next Business Day Response Time |