| Characteristic |
Description |
 | |
| Base Configuration | HPE ProLiant ML30 Gen10, part number P16928-421 |
| Form Factor | Pedestal (Tower) |
| CPU | 1 Intel Xeon E-2224 processor: 4 cores, 4 threads, 8MB L3 cache, operating frequency 3.4GHz...4.6GHz (with Intel Turbo Boost Technology 2.0)
Maximum supported RAM frequency 2666MHz
Intel Hyper Threading Technology is not supported |
| Chipset | Intel C246 Series Chipset |
| RAM | Preinstalled memory 16 GB: 1 module HPE 16GB (1x 16GB) Dual Rank x8 DDR4-2666 CAS-19-19-19 Unbuffered Standard Memory Kit
Supported memory types: HPE Memory DDR4 Unbuffered DIMM (UDIMM)
Maximum RAM 64GB (4x16GB)
Dual-channel memory controller integrated into the CPU, 2 modules per channel, 4 modules in total
Memory operating frequency 2666MHz
Maximum memory subsystem bandwidth 42.6GB/s |
| Disk subsystem | Up to 4 Hot Plug 3.5" LFF SAS/SATA HDD/SSD hot swappable drives
(SAS drives require SAS controller and HPE ML30 Gen10 Mini SAS Cable Kit)
Optional: 1 x M.2 NVMe 22110 PCIe (x2)
Optional: Boot flash drive to internal USB
Optional: Boot flash drive to internal microSD |
| Disk subsystem controller | Integrated RAID controller HPE Smart Array Embedded Software RAID S100i SR with 6 SATA ports (RAID 0/1/10/5, Windows only)
6 SATA 6Gb/s ports, RAID 0/1/10/5 support (Software RAID), Zero Memory Cache, HBA Mode support
M.2 PCIe x2 221110 port on the server motherboard for an NVMe drive of the M.2 format
Additionally:
RAID controller HPE Smart Array E208i-p SR Gen10 (8 Int Lanes/No Cache) 12G SAS PCIe Plug-in Controller (in the PCIe expansion slot)
RAID controller HPE Smart Array P408i-p SR Gen10 (8 Int Lanes/2GB Cache) 12G SAS PCIe Plug-in Controller (in the expansion slot PCIe)
RAID-controller HPE Smart Array E208e-p SR Gen10 (8 Ext Lanes/No Cache) 12G SAS PCIe Plug-in Controller (in PCIe expansion slot)
RAID-controller HPE Smart Array P408e-p SR Gen10 (8 Ext Lanes/4GB Cache) 12G SAS PCIe Plug-in Controller (in PCIe expansion slot)
Controller cache protection battery (can be used simultaneously for several controllers) |
| Network controller | Integrated network controller HPE Ethernet 1Gb 2-port 361i Adapter based on Intel i350
Additional network card in expansion slot |
| Expansion slots | Slot 1 PCIe 3.0 x16/x16 Full Heigth Full Length (CPU)
Slot 2 PCIe 3.0 x4/x8 Full Heigth Half Length (Chipset)
Slot 3 PCIe 3.0 x4/x16 Full Heigth Full Length (Chipset)
Slot 4 PCIe 3.0 x4/x8 Full Height Half Length (Chipset) |
| Optical storage | Optional:
One HPE 9.5mm SATA DVD-ROM JackBlack Gen9 Optical Drive OR
One HPE 9.5mm SATA DVD-RW JackBlack Gen9 Optical Drive
(Requires installation kit)
HPE Mobile USB Non Leaded System DVD-RW Drive (for USB 3.0 port only) |
| Interfaces | On the front panel:
- 1 USB 3.0 port
- 1 USB 2.0 port
On the rear panel:
- 4 USB 3.0 ports
- DB-15 video connector
- 2 GbE RJ-45 ports
- serial port (optional)
- dedicated 1Gb management port (optional)
Internal ports:
- 1 USB 3.0 port |
| Compliance with industry standards | • ACPI 6.1 Compliant
• PCIe 3.0 Compliant
• WOL Support
• Microsoft® Logo certifications
• PXE Support
• USB 3.0 Compliant
• USB 2.0 Compliant
• SMBIOS 3.1
• UEFI 2.6 (Unified Extensible Firmware Interface Forum)
• Redfish API
• IPMI 2.0
• Secure Digital 4.0
• TPM 1.2 and 2.0 support
• Advanced Encryption Standard (AES)
• Triple Data Encryption Standard (3DES)
• SNMP v3
• TLS 1.2
• DMTF Systems Management Architecture for Server Hardware Command Line (SMASH CLP)
• Active Directory v1.0
• ASHRAE A3/A4
• Energy Star |
| Video adapter | Integrated Matrox G200 video standard, 1920 x 1200 (32 bpp)
16 MB Video Memory
It is possible to install an additional video card or graphic accelerator |
| Power Unit | x HPE 350W Fixed Install Non-Redundant Power Supply
Available for hot-swappable redundant power supplies
(Requires HPE ML30 Gen9 4U Redundant Power Supply Enablement Kit) |
| Cooling | 1 x Non-redundant, Fixed Mount Rear Panel Controlled System Fan
Additional fan required when installing expansion cards or M.2 storage: ML30 Gen10 PCI Fan and Baffle Kit |
| Supported Operating Systems | Windows Server 2019
Windows Server 2016 (Most Recent Version)
VMware vSphere 6.7 and 6.5 U3 (VMware support is available on Intel Xeon E-Series processors only)
Red Hat Enterprise Linux (RHEL) 7.6 and 8.0
SUSE Linux Enterprise Server (SLES) 15 and 12 SP3
CentOS 7.5
ClearOS/VM 7.5 |
| Rack mount installation | Rack Mount Kit (Optional) |
| Built-in controls | HPE iLO (HPE Integrated Lights-Out) 32 MB Flash, Firmware HPE iLO 5 - status monitoring, alerts and reports, remote management
(dedicated 1Gb management port is optional, the built-in network adapter is used by default)
UEFI - secure server configuration and boot in accordance with the industry standard Unified Extensible Firmware Interface (UEFI)
HPE RESTful API - application developer interface
Intelligent Provisioning - a tool for automated deployment of server infrastructure
Embedded Remote Support - built-in remote support tools that provide automatic transfer of information about hardware events to HP service departments |
| Safety | Power-on password
Serial interface control
Administrator's password
TPM 2.0/1.2
UEFI |
| BIOS | HPE Server Unified Extensible Firmware Interface (UEFI) |
| Dimensions | Height 36.83 cm, Width 17.50 cm, Depth 47.50 cm |
| Weight | Minimum 10 kg
Maximum 17 kg |
| Power supply | 100/240 VAC, 6.0 A, 50/60 Hz |
| Operating Environment | Operating temperature from +10°C to +35°C
Storage temperature from -30°C to +60°C
Humidity no more than 90% |
| Noise level | Idle - 23 dBa
Under load - 23 dBa |
| Warranty | 1 year warranty, service center |