| Characteristic |
Description |
 | |
| Base Configuration | HPE ProLiant DL20 Gen10, part number P17080-B21 |
| Form Factor | 1U, rack mountable |
| CPU | 1 Intel Xeon E-2224 processor: 4 cores, 4 threads, 8MB L3 cache, operating frequency 3.4GHz...4.6GHz (with Intel Turbo Boost Technology 2.0)
Maximum supported RAM frequency 2666MHz
Intel Hyper Threading Technology is not supported |
| Chipset | Intel C242 Series Chipset |
| RAM | Preinstalled memory 16 GB: 1 module HPE 16GB (1x 16GB) Dual Rank x8 DDR4-2666 CAS-19-19-19 Unbuffered Standard Memory Kit
Supported memory types: HPE Memory DDR4 Unbuffered DIMM (UDIMM)
Maximum RAM 64GB (4x16GB)
Dual-channel memory controller integrated into the CPU, 2 modules per channel, 4 modules in total
Memory operating frequency 2666MHz
Maximum memory subsystem bandwidth 42.6GB/s |
| Disk subsystem | Up to 4 or 6 Hot Plug 2.5" SFF SAS3/SATA3 HDD/SSD hot swappable drives (6 drives require additional 2-drive cage)
Optional: Up to 2 M.2 SATA 2280 drives connected to integrated SATA S100i controller
(Requires HPE Universal SATA HHHL 3yr Wty M.2 Kit to be installed in expansion slot)
Optional: 1 M.2 NVMe 22110 drive connected to PCIe bus (x2)
(Requires HPE DL20/ML30 Gen10 M.2/Dedicated iLO and Serial Port Kit - "PCIe and other options" field in Configurator)
Optional: Bootable flash drive to internal USB port
Optional: Bootable flash drive to internal microSD |
| Disk subsystem controller | Integrated RAID controller HPE Smart Array Embedded Software RAID S100i SR with 14 SATA ports (RAID 0/1/10/5, Windows only)
12 SATA 6Gb/s ports, RAID 0/1/10/5 support (Software RAID), Zero Memory Cache, HBA Mode support
2 ports are used to connect M.2 SATA 2280 drives on the optional HPE Universal SATA HHHL 3yr Wty M.2 Kit expansion card
Additionally:
RAID controller HPE Smart Array E208i-a SR Gen10 (8 Int Lanes/No Cache) 12G SAS Modular Controller LH (into the connector on the motherboard, does not take up the PCIe slot)
RAID controller HPE Smart Array P408i-a SR Gen10 (8 Int Lanes/2GB Cache) 12G SAS Modular Controller LH (into the connector on the motherboard, does not occupy the PCIe slot)
RAID-controller HPE Smart Array E208e-p SR Gen10 (8 Ext Lanes/No Cache) 12G SAS PCIe Plug-in Controller (into the PCIe expansion slot)
RAID-controller HPE Smart Array P408e-p SR Gen10 (8 Ext Lanes/4GB Cache) 12G SAS PCIe Plug-in Controller (into the PCIe expansion slot)
Controller cache protection battery (can be used simultaneously for several controllers)
HBA-adapters from the configurator list |
| Network controller | Integrated network controller HPE Ethernet 1Gb 2-port 361i Adapter based on Intel i350
Additional network cards in expansion slots (2 max)
Additional replaceable I/O module FlexibleLOM Adapter
(Requires replacement of riser card with HPE DL20 Gen10 FlexibleLOM Riser Kit (1 PCIe 3.0 x8/x8 FlexibleLOM LP slot, 1 PCIe 3.0 x8/x16 FHHL slot) |
| Expansion slots | Pre-installed Riser Card, expansion slots:
Slot 1 PCIe 3.0 x8/x16 Full Height Half Length Slot
Slot 2 PCIe 3.0 x8/x8 Low Profile Half Length Slot
Riser Card can be replaced with FlexibleLOM Riser Card, expansion slots:
Slot 1 PCIe 3.0 x8/x16 Full Height Half Length Slot
Slot 2 PCIe 3.0 x8/x8 Flexible LOM Slot |
| Optical storage | Optional (4SFF configurations without optional 2-drive cage only):
One HPE 9.5mm SATA DVD-ROM JackBlack Gen9 Optical Drive OR
One HPE 9.5mm SATA DVD-RW JackBlack Gen9 Optical Drive OR
(Requires installation kit)
HPE Mobile USB Non Leaded System DVD-RW Drive (for USB 3.0 port only) |
| Interfaces | On the front panel:
- 1 USB 3.0 port
- 1 iLO Service Port (USB)
On the rear panel:
- 2 USB 3.0 ports
- DB-15 video connector
- 2 GbE RJ-45 ports
- serial port (optional)
- dedicated 1Gb management port (optional)
Internal ports:
- 1 USB 3.0 port |
| Compliance with industry standards | • ACPI 6.1 Compliant
• PCIe 3.0 Compliant
• WOL Support
• Microsoft® Logo certifications
• PXE Support
• USB 3.0 Compliant
• USB 2.0 Compliant
• SMBIOS 3.1
• UEFI 2.6 (Unified Extensible Firmware Interface Forum)
• Redfish API
• IPMI 2.0
• Secure Digital 4.0
• TPM 1.2 and 2.0 support
• Advanced Encryption Standard (AES)
• Triple Data Encryption Standard (3DES)
• SNMP v3
• TLS 1.2
• DMTF Systems Management Architecture for Server Hardware Command Line (SMASH CLP)
• Active Directory v1.0
• ASHRAE A3/A4
• Energy Star |
| Video adapter | Integrated Matrox G200 video standard, 1920 x 1200 (32 bpp)
16 MB Video Memory |
| Power Unit | 1 x HPE 500W hot-swappable power supply (when installing a second PSU)
Optional second PSU for redundancy
Optional 800W DC power supplies |
| Cooling | 3 x non-redundant, fixed-mount, controlled system fans |
| Supported Operating Systems | Windows Server 2019
Windows Server 2016 (Most Recent Version)
VMware vSphere 6.7 and 6.5 U3 (VMware support is available on Intel Xeon E-Series processors only)
Red Hat Enterprise Linux (RHEL) 7.6 and 8.0
SUSE Linux Enterprise Server (SLES) 15 and 12 SP3
CentOS 7.5
ClearOS/VM 7.5 |
| Rack mount installation | HPE 1U Short Friction Rail Kit |
| Built-in controls | HPE iLO (HPE Integrated Lights-Out) 32 MB Flash, Firmware HPE iLO 5 - status monitoring, alerts and reports, remote management
(dedicated 1Gb management port is optional, the built-in network adapter is used by default)
UEFI - secure server configuration and boot in accordance with the industry standard Unified Extensible Firmware Interface (UEFI)
HPE RESTful API - application developer interface
Intelligent Provisioning - a tool for automated deployment of server infrastructure
Embedded Remote Support - built-in remote support tools that provide automatic transfer of information about hardware events to HP service departments |
| Safety | Power-on password
Serial interface control
Administrator's password
TPM 2.0/1.2
UEFI |
| BIOS | HPE Server Unified Extensible Firmware Interface (UEFI) |
| Dimensions | Height 4.32 cm, Width 43.46 cm, Depth 38.22 cm |
| Weight | Minimum 8 kg |
| Power supply | 100/240 VAC, 5.5 A, 50/60 Hz |
| Operating Environment | Operating temperature from +10°C to +35°C
Storage temperature from -30°C to +60°C
Humidity no more than 90% |
| Noise level | Idle - 21 dBa
Under load - 29 dBa |
| Warranty | 1 year warranty, service center |