| Characteristic |
Description |
 | |
| Base Configuration | HPE ProLiant DL325 Gen10, part number P17199-B21 |
| Form Factor | 1U, rack mountable |
| CPU | AMD EPYC 7262 processor, operating frequency 3.2-3.4GHz, 8 cores, L3 cache 128MB, 155W
Maximum number of processors per server - 1
Maximum effective RAM frequency supported by the processor, 2933 MT/s |
| Chipset | System on Chip (SoC) design |
| RAM | Preinstalled 16 GB memory: 1 HPE 16GB (1x 16GB) Single Rank x4 DDR4-2933 CAS-21-21-21 Registered Smart Memory Kit
Supported memory types:
HPE SmartMemory DDR4 Registered DIMM (RDIMM) - up to 16 modules
HPE SmartMemory DDR4 Load Reduced DIMM (LRDIMM) - up to 16 modules
Maximum RAM 2048 GB (16x128 GB) for LRDIMM, 1024 GB (16x64 GB) for RDIMM
Eight-channel memory controller integrated into the CPU: 16 slots per server, 16 slots per CPU, 2 modules per channel
Memory operating frequency 2933 MHz (1 DPC), 2666 MHz (2 DPC) (limited by processor, DPC - DIMM Per Channel)
Maximum memory subsystem bandwidth 187 GB/s
Support for HPE SmartMemory technology |
| Disk subsystem | Up to 4 Hot Plug 3.5" LFF SAS/SATA HDD/SSD hot swap drives (additional controller required for SAS)
Additional:
- 2 M.2 SATA drives in expansion slot cage
- internal MicroSD drive in motherboard slot
- internal USB drive in motherboard slot
- PCIe SSD in expansion slot |
| Disk subsystem controller | Integrated RAID controller HPE Smart Array Embedded Software RAID S100i SR Controller, 4 SATA ports
Additionally in the connector on the motherboard (the option is not compatible with the additional riser card Slot3):
RAID-module HPE Smart Array E208i-a 12Gb SAS Controller (RAID 0/1/10/5/HBA) 8 Ports Internal, Smart Path
RAID-module HPE Smart Array P408i-a 12Gb SAS Controller (RAID 1/10/5/50/6/60/HBA) 8 Ports Internal, Smart Path, 2GB Cache, Smart Cache (opt)
Additionally in expansion slots:
Raid-controller HPE Smart Array E208i-p SR Gen10 ( 8 Int Lanes/No Cache) 12G SAS PCIe Plug-in Controller, RAID 0/1/10/5/JBOD
Raid controller HPE Smart Array P408i-p SR Gen10 (8 Int Lanes/2GB Cache) 12G SAS PCIe Plug-in Controller, RAID 0/1/10/5/50/6/60/JBOD
RAID controller HPE Smart Array E208e-p 12Gb SAS Controller (RAID 1/10/5/HBA) 8 Ports External, Smart Path (opt)
RAID controller HPE Smart Array P408e-p 12Gb SAS Controller (RAID 1/10/5/50/6/60/HBA) 8 Ports External, Smart Path, 4GB Cache, Smart Cache (opt) |
| Network controller | HPE Ethernet FlexibleLOM Adapter 1Gb 4-port 366FLR replaceable I/O module installed
Additional network adapters in expansion slots
1GbE management port (Dedicated iLO connector) |
| Expansion slots | Riser Card 1:
Slot 1 PCIe 3.0 x16/x16 Full Length/Full Height Slot
Slot 2 PCIe 3.0 x8/x8 Low Profile Slot
Riser Card 2, optional:
Slot 3 PCIe 3.0 x16/x16 Low Profile Slot (not compatible with installed RAID module) |
| Optical storage | HPE SATA DVD-RW Optical Drive (optional)
Installation kit required |
| Interfaces | Front: 1 x USB 3.0, iLO Service Port
Rear: 2 x USB 3.0, DB-15 Video, 4 x GbE RJ-45, 1GbE RJ-45 Management, Serial in Slot3 (optional)
Internal Ports: Micro SD Slot, USB 3.0 |
| Video adapter | Integrated video adapter, 16MB video memory, 1920 x 1200@60Hz (32 bpp) |
| Power Unit | x 800W hot-swappable power supply with redundancy when installing a second power supply |
| Cooling | 5 hot-swappable, redundant, controllable system fans (single-rotor) |
| Supported Operating Systems | • Windows Server 2019
• VMware ESXi 6.5 U3
• VMware ESXi 6.7 U3
• Red Hat Enterprise Linux (RHEL) 7.6
• SUSE Linux Enterprise Server (SLES) 12 SP4
• SUSE Linux Enterprise Server (SLES) 15 SP1 |
| Rack mount installation | HPE 1U Small Form Factor Easy Install Rail Kit
Additional:
- Cable management
- Front panel overlay with locking capability
- Chassis intrusion switch |
| Built-in controls | HPE iLO (HPE Integrated Lights-Out), Firmware HPE iLO5 - status monitoring, alerts and reports, remote management
UEFI - secure server configuration and boot in accordance with the industry standard Unified Extensible Firmware Interface (UEFI)
HPE RESTful API - application developer interface
Intelligent Provisioning - a tool for automated deployment of server infrastructure
Embedded Remote Support - built-in remote support tools that provide automatic transmission of information about hardware events to HP service departments |
| BIOS | HPE Server Unified Extensible Firmware Interface (UEFI) |
| Dimensions | Height 4.29 cm, Width 43.46 cm, Depth 61.49 cm |
| Weight | Minimum 10 kg, maximum 16 kg |
| Power supply | 100/240 VAC, 6.7/3.3 A, 50/60 Hz |
| Operating Environment | Operating temperature from +10°C to +35°C
Storage temperature from -30°C to +60°C
Humidity no more than 90% |
| Noise level | Idle - 32 dBa
Under load - 37 dBa |
| Warranty | HP Standard 3-Year 9x5 Onsite Warranty with Next Business Day Response Time |