| Characteristic |
Description |
 | |
| Base Configuration | HPE ProLiant DL325 Gen10, part number P17200-B21 |
| Form Factor | 1U, rack mountable |
| CPU | AMD EPYC 7262 processor, operating frequency 3.2-3.4GHz, 8 cores, L3 cache 128MB, 155W
Maximum number of processors per server - 1
Maximum effective RAM frequency supported by the processor, 2933 MT/s |
| Chipset | System on Chip (SoC) design |
| RAM | Preinstalled memory 16 GB: 2 modules HPE 8GB Single Rank x8 DDR4-2933 CAS-21-21-21 Registered Smart Memory Kit
Supported memory types:
HPE SmartMemory DDR4 Registered DIMM (RDIMM) - up to 16 modules
HPE SmartMemory DDR4 Load Reduced DIMM (LRDIMM) - up to 16 modules
Maximum RAM 2048 GB (16x128 GB) for LRDIMM, 1024 GB (16x64 GB) for RDIMM
Eight-channel memory controller integrated into the CPU: 16 slots per server, 16 slots per CPU, 2 modules per channel
Memory operating frequency 2933 MHz (1 DPC), 2666 MHz (2 DPC) (limited by the processor, DPC - DIMM Per Channel)
Maximum memory subsystem bandwidth of 187 GB/s
Support for HPE SmartMemory technology |
| Disk subsystem | Up to 8 Hot Plug 2.5" SFF SAS/SATA HDD/SSD hot swap drives
Optional:
- Up to 2 Hot Plug 2.5" SFF SAS/SATA HDD/SSD hot swap drives in front panel cage OR
- Up to 2 Hot Plug 2.5" SFF NVMe SSD hot swap drives in front panel cage
- 2 M.2 SATA drives in cage in expansion slot
- Internal MicroSD drive in slot on motherboard
- Internal USB drive in slot on motherboard
- PCIe SSD in expansion slot |
| Disk subsystem controller | RAID module HPE Smart Array P408i-a 12Gb SAS Controller (RAID 1/10/5/50/6/60/HBA) 8 Ports Internal, Smart Path, 2GB Cache, Smart Cache
(installed in the connector on the motherboard, not compatible with the additional riser card Slot3)
Or optionally in this connector (the option is not compatible with the additional riser card Slot3):
RAID module HPE Smart Array P816i-a SR Gen10 (16 Int 4GB Cache+Smart) 12G SAS Modular Controller, RAID 0/1/10/5/50/6/60/JBOD, Smart Cache
Additionally in expansion slots:
RAID controller HPE Smart Array E208e-p 12Gb SAS Controller (RAID 1/10/5/HBA) 8 Ports External, Smart Path
RAID Controller HPE Smart Array P408e-p 12Gb SAS Controller (RAID 1/10/5/50/6/60/HBA) 8 Ports External, Smart Path, 4GB Cache, Smart Cache |
| Network controller | HPE Ethernet FlexibleLOM Adapter 1Gb 4-port 366FLR replaceable I/O module installed
Additional network adapters in expansion slots
1GbE management port (Dedicated iLO connector) |
| Expansion slots | Riser Card 1:
Slot 1 PCIe 3.0 x16/x16 Full Length/Full Height Slot
Slot 2 PCIe 3.0 x8/x8 Low Profile Slot |
| Optical storage | HPE SATA DVD-RW Optical Drive (optional)
Installation kit required |
| Interfaces | Front: 1 x USB 3.0, iLO Service Port
Rear: 2 x USB 3.0, DB-15 Video, 4 x GbE RJ-45, 1GbE RJ-45 Management, Serial in Slot3 (optional)
Internal Ports: Micro SD Slot, USB 3.0 |
| Video adapter | Integrated video adapter, 16MB video memory, 1920 x 1200@60Hz (32 bpp) |
| Power Unit | x 500W hot-swappable power supply with redundancy when installing a second power supply |
| Cooling | 5 hot-swappable, redundant, controllable system fans (dual-rotor) |
| Supported Operating Systems | • Windows Server 2019
• VMware ESXi 6.5 U3
• VMware ESXi 6.7 U3
• Red Hat Enterprise Linux (RHEL) 7.6
• SUSE Linux Enterprise Server (SLES) 12 SP4
• SUSE Linux Enterprise Server (SLES) 15 SP1 |
| Rack mount installation | HPE 1U Small Form Factor Easy Install Rail Kit
Additional:
- Cable management
- Front panel overlay with locking capability
- Chassis intrusion switch |
| Built-in controls | HPE iLO (HPE Integrated Lights-Out), Firmware HPE iLO5 - status monitoring, alerts and reports, remote management
UEFI - secure server configuration and boot in accordance with the industry standard Unified Extensible Firmware Interface (UEFI)
HPE RESTful API - application developer interface
Intelligent Provisioning - a tool for automated deployment of server infrastructure
Embedded Remote Support - built-in remote support tools that provide automatic transmission of information about hardware events to HP service departments |
| BIOS | HPE Server Unified Extensible Firmware Interface (UEFI) |
| Dimensions | Height 4.29 cm, Width 43.46 cm, Depth 61.49 cm |
| Weight | Minimum 10 kg, maximum 16 kg |
| Power supply | 100/240 VAC, 6.7/3.3 A, 50/60 Hz |
| Operating Environment | Operating temperature from +10°C to +35°C
Storage temperature from -30°C to +60°C
Humidity no more than 90% |
| Noise level | Idle - 34 dBa
Under load - 38 dBa |
| Warranty | HP Standard 3-Year 9x5 Onsite Warranty with Next Business Day Response Time |