| Characteristic |
Description |
 | |
| Base Configuration | HPE ProLiant DL325 Gen10, part number P18603-B21 |
| Form Factor | 1U, rack mountable |
| CPU | AMD EPYC 7262 processor, operating frequency 3.2-3.4GHz, 8 cores, L3 cache 128MB, 155W
Maximum number of processors per server - 1
Maximum effective RAM frequency supported by the processor, 3200 MT/s
Maximum amount of RAM supported by the processor, 4TB |
| Chipset | System on Chip (SoC) design |
| RAM | Preinstalled 16 GB memory: 1 HPE 16GB (1x 16GB) Single Rank x4 DDR4-3200 CAS-22-22-22 Registered Smart Memory Kit
Supported memory types:
HPE SmartMemory DDR4 Registered DIMM (RDIMM) - up to 16 modules
HPE SmartMemory DDR4 Load Reduced DIMM (LRDIMM) - up to 16 modules
Maximum RAM 2048 GB (16x128 GB) for LRDIMM, 1024 GB (16x64 GB) for RDIMM
Eight-channel memory controller integrated into the CPU: 16 slots per server, 16 slots per CPU, 2 modules per channel
Memory operating frequency of 3200 MT/s (1 DPC), 2933 MT/s (2 DPC), DPC - DIMM Per Channel
Maximum memory subsystem bandwidth 205 GB/s
Support for HPE SmartMemory technology |
| Disk subsystem | Up to 4 Hot Plug 3.5" LFF SAS/SATA HDD/SSD hot swappable drives
Additional:
- 2 M.2 SATA drives in expansion slot cage
- internal MicroSD drive in motherboard slot
- internal USB drive in motherboard slot
- PCIe SSD in expansion slot |
| Disk subsystem controller | RAID module HPE Smart Array E208i-a SR Gen10 ( 8 Int Lanes / No Cache) 12G SAS Modular Controller, RAID 0/1/10/5 / JBOD (installed in the slot on the server motherboard)
Integrated S100i controller
Optional in the slot on the motherboard:
RAID module HPE Smart Array P408i-a 12Gb SAS Controller (RAID 1/10/5/50/6/60 / HBA) 8 Ports Internal, Smart Path, 2GB Cache, Smart Cache (opt)
Additionally in expansion slots:
RAID controller HPE Smart Array E208e-p 12Gb SAS Controller (RAID 1/10/5 / HBA) 8 Ports External, Smart Path (opt)
RAID controller HPE Smart Array P408e-p 12Gb SAS Controller (RAID 1/10/5/50/6/60/HBA) 8 Ports Externel, Smart Path, 4GB Cache, Smart Cache (opt) |
| Network controller | Installed HPE Ethernet 1Gb 4-port BASE-T I350-T4 OCP3 Adapter Replaceable I/O Module
Additional network adapters in expansion slots
1GbE management port (Dedicated iLO management port) |
| Expansion slots | Riser Card 1:
Slot 1 PCIe 4.0 x16/x16 Full Length/Full Height Slot
Slot 2 PCIe 4.0 x16/x16 Low Profile Slot
Riser Card 2, optional (one of the following):
Slot 3 PCIe 4.0 x16/x16 Low Profile Slot
Slot 3 PCIe 4.0 x16/x16 Half-Length/Full Height Slot (only if Slot 2 of Riser Card 1 is free) |
| Optical storage | HPE SATA DVD-RW Optical Drive (optional)
Installation kit required |
| Interfaces | Front: 1 x USB 3.1, iLO Service Port
Rear: 2 x USB 3.1, DB-15 Video, 4 x GbE RJ-45, 1GbE RJ-45 Management, Serial (optional)
Internal Ports: Micro SD Slot, USB 3.1 |
| Video adapter | Integrated video adapter, 16MB video memory, 1920 x 1200@60Hz (32 bpp) |
| Power Unit | x 500W hot-swappable power supply with redundancy when installing a second power supply |
| Cooling | hot-swappable, redundant system fans (dual rotor)
Requires additional fan when installing Ride Controller battery |
| Supported Operating Systems | Windows Server 2016
Windows Server 2019
VMware ESXi 6.5 U3
VMware ESXi 6.7 U3
SUSE Linux Enterprise Server (SLES) 12 SP4
SUSE Linux Enterprise Server (SLES) 15 SP1
Red Hat Enterprise Linux (RHEL) |
| Rack mount installation | HPE DL325 Gen10 Plus 1075mm Easy Install Rail Kit
Additional:
- Cable Organizer
- Front Panel Cover with Locking Capability
- Chassis Intrusion Sensor |
| Built-in controls | HPE iLO (HPE Integrated Lights-Out), Firmware HPE iLO5 - status monitoring, alerts and reports, remote management
UEFI - secure server configuration and boot in accordance with the industry standard Unified Extensible Firmware Interface (UEFI)
HPE RESTful API - application developer interface
Intelligent Provisioning - a tool for automated deployment of server infrastructure
Embedded Remote Support - built-in remote support tools that provide automatic transmission of information about hardware events to HP service departments |
| BIOS | HPE Server Unified Extensible Firmware Interface (UEFI) |
| Dimensions | Height 4.28 cm, Width 43.46 cm, Depth 61.49 cm |
| Weight | Minimum 10 kg, maximum 16 kg |
| Power supply | 100/240 VAC, 6.7/3.3 A, 50/60 Hz |
| Operating Environment | Operating temperature from +10°C to +35°C
Storage temperature from -30°C to +60°C
Humidity no more than 90% |
| Noise level | Idle - 36 dBa
Under load - 36 dBa |
| Warranty | HP Standard 3-Year 9x5 Onsite Warranty with Next Business Day Response Time |