| Characteristic |
Description |
 | |
| Base Configuration | HPE ProLiant DL160 Gen10, part number P19560-B21 |
| Form Factor | 1U, rack mountable |
| CPU | 1 Intel Xeon Silver 4208 processor: 8 cores, 11MB L3 cache, 2.1GHz operating frequency, 2 UPI channels 9.6GT/s
Maximum number of processors per server - 2, 32 logical CPUs per system (with Hyper-Threading technology)
Maximum RAM frequency supported by the processor, 2400MHz |
| Chipset | Intel C622 Series Chipset |
| RAM | Preinstalled 16 GB memory: 1 HPE 16GB (1x16GB) Single Rank x4 DDR4-2933 CAS-21-21-21 Registered Memory Kit
Supported memory types:
HPE SmartMemory DDR4 Load Reduced DIMM (LRDIMM), DDR4 Registered DIMM (RDIMM)
Maximum RAM 1024GB (16x64GB)
Six-channel memory controller integrated into the CPU: 16 slots per server, 8 slots per CPU
Channels 1.4 - two modules per channel, channels 2,3,5,6 - one module per channel
Memory operating frequency 2400 MHz (limited by the processor)
Maximum memory subsystem bandwidth 115.2 GB/s per processor
Support for HPE technologies SmartMemory, Advanced ECC, Online Spare |
| Disk subsystem | Up to 8 Hot Plug 2.5" SFF SAS/SATA HDD/SSD hot swappable drives
Additional drives: Micro SD, USB |
| Disk subsystem controller | Integrated RAID controller HPE Smart Array Embedded Software RAID S100i SR Controller
14 ports SATA 6Gb/s, support for RAID 0/1/10/5
Additional:
RAID controller HPE Smart Array E208i-a SR Gen10 (8 Int Lanes/No Cache) 12G SAS Modular Controller
RAID controller HPE Smart Array P408i-a SR Gen10 (8 Int Lanes/2GB Cache) 12G SAS Modular Controller
RAID controller HPE Smart Array E208e-p SR Gen10 (8 Ext Lanes/No Cache) 12G SAS PCIe Plug-in Controller
RAID controller HPE Smart Array E208i-p SR Gen10 (8 Int Lanes/No Cache) 12G SAS PCIe Plug-in Controller
Controller Cache Protection Battery |
| Network controller | Integrated network controller HPE Ethernet 1Gb 2-port Adapter
Dedicated management port 1GbE (Dedicated iLO connector)
Additional network cards in expansion slots
Additional replaceable I/O module FlexibleLOM Adapter when installing HPE DL160 Gen10 FlexibleLOM/NVMe Riser Kit |
| Expansion slots | CPU#1 PCIe riser Card:
Slot 1 PCIe 3.0 x16/x16 Half Length/Full Height Slot connection to CPU1
Slot 2 PCIe 3.0 x8/x8 Low Profile Slot connection to CPU1
OR
CPU#1 FlexibleLOM riser Card (optional):
Slot 1 PCIe 3.0 x8/x8 Flexible LOM connection to CPU1
Slot 2 PCIe 3.0 x8/x8 Low Profile Slot connection to CPU1
CPU#2 PCIe riser Card (optional):
Slot 3 PCIe 3.0 x16/x16 Low Profile Slot connection to CPU2 |
| Optical storage | Optional:
HPE 9.5mm SATA DVD-ROM JackBlack Gen9 Optical Drive OR
HPE 9.5mm SATA DVD-RW JackBlack Gen9 Optical Drive
(Requires installation kit) |
| Interfaces | Front: 1 x USB 3.0, iLO Front Service Port
Rear: 2 x USB 3.0, DB-15 Video, 2 x GbE RJ-45, 1GbE RJ-45 Management Port
Internal Ports: Micro SD Slot, USB 3.0 Port |
| Video adapter | Integrated Video Standard, 1920 x 1200@60Hz (32 bpp) |
| Power Unit | 1 x HPE 500W hot-swappable power supply
Second 500W power supply can be installed for redundancy |
| Cooling | hot-swappable, non-redundant, controlled system fans in 1-CPU configurations
6 hot-swappable, non-redundant, controlled system fans when a second processor is installed |
| Supported Operating Systems | Windows Server 2016
Windows Server 2019
VMware ESXi 6.0 U3
VMware ESXi 6.5 U2
VMware ESXi 6.7 U1
Red Hat Enterprise Linux (RHEL) 7.6 (with Kbase)
SUSE Linux Enterprise Server (SLES) 12 SP4
SUSE Linux Enterprise Server (SLES) 15 |
| Rack mount installation | HPE 1U Small Form Factor Easy Install Rail Kit |
| Built-in controls | HPE iLO (HPE Integrated Lights-Out) - status monitoring, alerts and reports, remote management
UEFI - secure server configuration and boot in accordance with the industry standard Unified Extensible Firmware Interface (UEFI)
HPE RESTful API - application developer interface
Intelligent Provisioning - a tool for automated deployment of server infrastructure
Embedded Remote Support - built-in remote support tools that provide automatic transmission of information about hardware events to HP service departments |
| BIOS | HPE Server Unified Extensible Firmware Interface (UEFI) |
| Dimensions | Height 4.29 cm, Width 43.46 cm, Depth 61.49 cm |
| Weight | 13 kg |
| Power supply | 100/240 VAC, 6.7/3.3 A, 50/60 Hz |
| Operating Environment | Operating temperature from +10°C to +35°C
Storage temperature from -30°C to +60°C
Humidity no more than 90% |
| Noise level | Idle - 28 dBa
Under load - 33 dBa |
| Warranty | 1 year warranty, service center |