| Characteristic |
Description |
 | |
| Base Configuration | HPE ProLiant DL180 Gen10, part number P19564-B21 |
| Form Factor | 2U, rack mountable |
| CPU | 1 Intel Xeon Silver 4208 processor: 8 cores, 11MB L3 cache, 2.1GHz operating frequency, 2 UPI channels 9.6GT/s
Maximum number of processors per server - 2, 32 logical CPUs per system (with Hyper-Threading technology)
Maximum RAM frequency supported by the processor, 2400MHz |
| Chipset | Intel C622 Series Chipset |
| RAM | Preinstalled 16 GB memory: 1 HPE 16GB (1x16GB) Single Rank x4 DDR4-2933 CAS-21-21-21 Registered Memory Kit
Supported memory types:
HPE SmartMemory DDR4 Load Reduced DIMM (LRDIMM), DDR4 Registered DIMM (RDIMM)
Maximum RAM 1024GB (16x64GB)
Six-channel memory controller integrated into the CPU: 16 slots per server, 8 slots per CPU
Channels 1.4 - two modules per channel, channels 2,3,5,6 - one module per channel
Memory operating frequency 2400 MHz (limited by the processor)
Maximum memory subsystem bandwidth 115.2 GB/s per processor
Support for HPE technologies SmartMemory, Advanced ECC, Online Spare |
| Disk subsystem | Up to 8 Hot Plug 2.5" SFF SAS/SATA hot-swap HDD/SSD drives
Up to 16 Hot Plug 2.5" SFF SAS/SATA hot-swap HDD/SSD drives with HPE DL180 Gen10 8 to 16SFF Upgrade Kit
Up to 24 Hot Plug 2.5" SFF SAS/SATA hot-swap HDD/SSD drives with HPE DL180 Gen10 16 to 24SFF Upgrade Kit
Additional up to 2 Hot Plug 2.5" SFF SATA hot-swap SSD drives with rear cage
Up to 2 M.2 SATA drives supported with optional HPE Universal SATA HHHL 3yr Wty M.2 Kit expansion card
Additional storage: Micro SD, USB |
| Disk subsystem controller | Integrated RAID controller HPE Smart Array Embedded Software RAID S100i SR Controller
14 ports SATA 6Gb/s, support for RAID 0/1/10/5
Additional:
RAID controller HPE Smart Array E208i-a SR Gen10 (8 Int Lanes/No Cache) 12G SAS Modular Controller
RAID controller HPE Smart Array P408i-a SR Gen10 (8 Int Lanes/2GB Cache) 12G SAS Modular Controller
RAID controller HPE Smart Array E208e-p SR Gen10 (8 Ext Lanes/No Cache) 12G SAS PCIe Plug-in Controller
RAID controller HPE Smart Array E208i-p SR Gen10 (8 Int Lanes/No Cache) 12G SAS PCIe Plug-in Controller
Controller Cache Protection Battery |
| Network controller | Integrated network controller HPE Ethernet 1Gb 2-port Adapter
Dedicated management port 1GbE (Dedicated iLO connector)
Additional network cards in expansion slots
Additional replaceable I/O module FlexibleLOM Adapter when installing HPE DL180 Gen10 FlexibleLOM Enablement Kit |
| Expansion slots | Primary Riser Card (CPU#1)
Slot 1 PCIe 3.0 x8/x8 Full Length/Full Height Slot connection to CPU1
Slot 2 PCIe 3.0 x8/x8 Half Length/Full Height Slot connection to CPU1
Slot 3 PCIe 3.0 x8/x8 Half Length/Full Height Slot connection to CPU1
OR (optional)
Slot 1 PCIe 3.0 x8/x8 Full Length/Full Height Slot connection to CPU1
Slot 2 PCIe 3.0 x8/x8 Half Length/Full Height Slot connection to CPU1
Slot 3 PCIe 3.0 x8 FlexibleLOM Slot connection to CPU1
OR (optional)
Slot 1 PCIe 3.0 x16/x16 Full Length/Full Height Slot connection to CPU1
Slot 2 PCIe 3.0 x8/x8 Half Length/Full Height Slot connection to CPU1
Secondary Riser Card (CPU#2, optional):
Slot 1 PCIe 3.0 x8/x8 Full Length/Full Height Slot connection to CPU2
Slot 2 PCIe 3.0 x8/x8 Half Length/Full Height Slot connection to CPU2
Slot 6 PCIe 3.0 x8/x8 Low Profile Slot connection to CPU2
OR (optional)
Slot 1 PCIe 3.0 x16/x16 Full Length/Full Height Slot connection to CPU2
Slot 2 PCIe 3.0 x8/x8 Half Length/Full Height Slot connection to CPU2 |
| Optical storage | Optional:
HPE 9.5mm SATA DVD-ROM JackBlack Gen9 Optical Drive OR
HPE 9.5mm SATA DVD-RW JackBlack Gen9 Optical Drive
(Requires installation kit) |
| Interfaces | Front: 1 x USB 3.0, iLO Front Service Port
Rear: 2 x USB 3.0, DB-15 Video, 2 x GbE RJ-45, 1GbE RJ-45 Management Port
Internal Ports: Micro SD Slot, USB 3.0 Port |
| Video adapter | Integrated Video Standard, 1920 x 1200@60Hz (32 bpp) |
| Power Unit | 1 x HPE 500W hot-swappable power supply
Second 500W power supply can be installed for redundancy |
| Cooling | hot-swappable, redundant, controllable system fans
2 hot-swappable, redundant, controllable system fans when a second processor is installed |
| Supported Operating Systems | Windows Server 2016
Windows Server 2019
VMware ESXi 6.0 U3
VMware ESXi 6.5 U2
VMware ESXi 6.7 U1
Red Hat Enterprise Linux (RHEL) 7.6 (with Kbase)
SUSE Linux Enterprise Server (SLES) 12 SP4
SUSE Linux Enterprise Server (SLES) 15 |
| Rack mount installation | HPE 2U Small Form Factor Easy Install Rail Kit |
| Built-in controls | HPE iLO (HPE Integrated Lights-Out) - status monitoring, alerts and reports, remote management
UEFI - secure server configuration and boot in accordance with the industry standard Unified Extensible Firmware Interface (UEFI)
HPE RESTful API - application developer interface
Intelligent Provisioning - a tool for automated deployment of server infrastructure
Embedded Remote Support - built-in remote support tools that provide automatic transmission of information about hardware events to HP service departments |
| BIOS | HPE Server Unified Extensible Firmware Interface (UEFI) |
| Dimensions | Height 8.73 cm, Width 44.54 cm, Depth 63.47 cm |
| Weight | 13 kg |
| Power supply | 100/240 VAC, 6.7/3.3 A, 50/60 Hz |
| Operating Environment | Operating temperature from +10°C to +35°C
Storage temperature from -30°C to +60°C
Humidity no more than 90% |
| Noise level | Idle - 27 dBa
Under load - 37 dBa |
| Warranty | 1 year warranty, service center |