| Characteristic |
Description |
 | |
| Base Configuration | HPE ProLiant DL380 Gen10, part number P20172-B21 |
| Form Factor | 2U, rack mountable |
| CPU | 1 Intel Xeon Silver 4208 processor: 8 cores, 11MB L3 cache, 2.1GHz operating frequency, 2 UPI channels 9.6GT/s.
Maximum number of processors per server - 2, 32 logical CPUs per system (in Hyper-Threading mode).
Maximum RAM frequency supported by the processor is 2400MHz.
Maximum amount of RAM supported by the processor is 1024MB. |
| Chipset | Intel C621 Series Chipset |
| RAM | Preinstalled 32 GB memory: 1 HPE 32GB (1x32GB) Dual Rank x8 DDR4-2933 CAS-21-21-21 Registered Memory Kit
Supported memory types:
HPE SmartMemory DDR4 Registered DIMM (RDIMM) - up to 24 modules
HPE SmartMemory DDR4 Load Reduced DIMM (LRDIMM) - up to 24 modules
Maximum RAM 2048 GB (16x128 GB) for LRDIMM, 1536 GB (24x64 GB) for RDIMM
Six-channel memory controller integrated into the CPU: 24 slots per server, 12 slots per CPU, 2 modules per channel
Memory operating frequency 2400 MHz (limited by the processor)
Maximum subsystem bandwidth 115.2 GB/s memory per processor
Support for HPE SmartMemory, Advanced ECC, Online Spare technologies |
| Disk subsystem | Installed cage:
Up to 12 Hot Plug 3.5" LFF SAS/SATA HDD/SSD hot-swappable drives, connected to P408i-a SAS module
Additional cages (optional):
- internal cage for 4 3.5" LFF SAS/SATA drives;
- rear cage for 3 Hot Plug 3.5" LFF SAS/SATA hot-swappable drives (occupies Riser-2 and Riser-3 bays);
- rear cage for 2 Hot Plug 2.5" SFF SAS/SATA hot-swappable drives and 1 PCIe x16 slot (occupies Riser-1 bay);
Total up to 19 3.5" LFF SAS/SATA drives and 2 2.5" SFF SAS/SATA drives.
Installed drives: none |
| Disk subsystem controller | RAID-module HPE Smart Array P416i-a SR Gen10 (8 Int Lanes/4GB Cache) 12G SAS Modular Controller, cache protection battery
16 SATA/SAS 12Gb/s ports, support for RAID 0/1/10/5/50/6/60, 4GB Cache Memory, SmartCache
Additionally in PCIe slots:
Raid-controller HPE Smart Array E208e-p SR Gen10 ( 8 Ext Lanes/No Cache) 12G SAS PCIe Plug-in Controller, RAID 0/1/10/5/JBOD
Raid-controller HPE Smart Array P408e-p SR Gen10 ( 8 Ext Lanes/4GB Cache) 12G SAS PCIe Plug-in Controller, RAID 0/1/10/5/50/6/60/JBOD |
| Network controller | HPE Ethernet FlexibleLOM Adapter 1Gb 4-port 366FLR Replacement I/O Module
1GbE Management Port (Dedicated iLO connector)
Additional network adapters in PCIe slots |
| Expansion slots | Three bays for installing riser cards,
Possible riser card options for the Riser-1bay (connected to CPU1):
- Riser card for 3 PCIe 3.0 slots: x8 FHHL, x16 FHFL, x8 FHHL, 2 M.2 SATA 2280 connectors (installed by default);
- Riser card for 2 PCIe 3.0 slots: x16 FHFL, x16 FHFL (slots 1 and 2);
- Riser card for 2 PCIe 3.0 slots: x16 FHFL, x16 FHFL (slots 2 and 3, for double-width GPUs);
- Riser card for 1 PCIe 3.0 x16 FHHL slot and a cage for 2 2.5" SFF SAS/SATA Hot-Swap drives;
Possible options for riser cards for the Riser-2(connects to CPU2, requires a second processor):
- Riser card for 3 PCIe 3.0 slots: x8 FHHL, x16 FHFL, x8 FHHL;
- Riser card for 2 PCIe 3.0 slots: x16 FHFL, x16 FHFL (slots 1 and 2);
- Riser card for 2 PCIe 3.0 slots: x16 FHFL, x16 FHFL (slots 2 and 3, for double-width GPUs);
Possible riser card options for the Riser-3 bay(connection to CPU2, requires a second processor):
- Riser card for 2 PCIe 3.0 slots: x8 FHHL, x8 FHHL;
- Riser card for 1 PCIe 3.0 slot: x16 FHHL;
When installing a rear cage for 3 LFF drives, the Riser-2 and Riser-3 bays are not used |
| Optical storage | External only via USB port |
| Interfaces | On the front panel: 1 USB 3.0 port
On the rear panel: 2 USB 3.0 ports, DB-15 video connector, 4 GbE RJ-45 ports, 1GbE RJ-45 management port, serial port (optional).
Internal ports: Micro SD Slot, 2 USB 3.0 ports. |
| Video adapter | Integrated Matrox G200 video standard, 1280 x 1024 (32 bpp), 1920 x 1200 (16 bpp)
Up to 5 additional video cards or graphic accelerators. |
| Power Unit | 2 x 800W Platinum-level (94%) redundant and hot-swappable power supplies |
| Cooling | 6 hot-swappable, redundant, and controllable High Performance Fans |
| Supported Operating Systems | Windows Server 2019: Essentials, Standard, Datacenter
Windows Server 2016: Essentials, Standard, Datacenter
Windows Server 2012 R2: Essentials, Standard, Datacenter
Microsoft Hyper-V Server: 2012 R2, 2016 & 2019
VMware vSphere 6.0 U3, 6.5 U2 & 6.7 U1
ClearVM: 7.6 & 8.0
Red Hat Enterprise Linux (RHEL) 7.6 w/ Kbase
SUSE Linux Enterprise Server (SLES) 12 SP4 and 15 SP1 (includes Xen) |
| Rack mount installation | HPE 2U Large Form Factor Easy Install Rail Kit
Cable management for slide rails (optional)
Additional:
- HPE 2U LFF Ball Bearing Rail Kit
- Front panel tamper evident cover |
| Built-in controls | HPE iLO (HPE Integrated Lights-Out) 4GB NAND, Firmware HPE iLO5 - status monitoring, alerts and reports, remote management
UEFI - secure server configuration and boot in accordance with the industry standard Unified Extensible Firmware Interface (UEFI)
HPE RESTful API - application developer interface
Intelligent Provisioning - a tool for automated deployment of server infrastructure
Embedded Remote Support - built-in remote support tools that provide automatic transmission of information about hardware events to HP service departments |
| BIOS | HPE Server Unified Extensible Firmware Interface (UEFI) |
| Dimensions | Height 8.73 cm, Width 44.55 cm, Depth 73.02 cm |
| Weight | Minimum 15 kg, maximum 23 kg |
| Power supply | 100/240 VAC, 6.7/3.3 A, 50/60 Hz |
| Operating Environment | Operating temperature from +10°C to +35°C
Storage temperature from -30°C to +60°C
Humidity no more than 90% |
| Noise level | Idle - 31 dBa
Under load - 31 dBa |
| Warranty | 1 year warranty, service center |