| Characteristic |
Description |
 | |
| Base Configuration | HPE ProLiant ML350 Gen10, part number P21786-421 |
| Form Factor | Pedestal, convertible for rack mounting (5U height) |
| CPU | 1 Intel Xeon Bronze 320R processor: 8 cores, 11MB L3 cache, 1.9GHz operating frequency, 2 UPI channels 9.6GT/s
Maximum number of processors per server - 2, 16 logical CPUs per system (Hyper-Threading technology is not supported)
Maximum RAM frequency supported by the processor is 2133MHz |
| Chipset | Intel C621 Series Chipset |
| RAM | Preinstalled 16GB memory: 1 HPE 16GB Single Rank x4 DDR4-2933 CAS-21-21-21 Registered Memory Kit
Supported memory types:
HPE SmartMemory DDR4 Registered DIMM (RDIMM) - up to 24 modules
HPE SmartMemory DDR4 Load Reduced DIMM (LRDIMM) - up to 24 modules
Maximum RAM 2048GB (16x128GB) for LRDIMM, 1536GB (24x64GB) for RDIMM
Six-channel memory controller integrated into the CPU: 24 slots per server, 12 slots per CPU, 2 slots per channel
Memory operating frequency 2133MHz (limited by the processor)
Maximum memory subsystem bandwidth 102.4 GB/s per processor
Support for HPE SmartMemory, Advanced ECC, Online Spare technologies |
| Disk subsystem | Up to 4 Hot Plug 3.5" LFF SATA/SAS HDD/SSD hot-swappable drives (SAS requires an additional controller)
Additional cages of the following types (no more than two additional cages in total):
- cage for 4 Hot Plug 3.5" LFF SATA/SAS HDD/SSD hot-swappable drives;
- cage for 8 Hot Plug 2.5" SFF SATA/SAS HDD/SSD hot-swappable drives.
Maximum number of drives: 12 LFF or 8 LFF + 8 SFF or 4 LFF +16 SFF (all drives are hot-swappable).
SAS drives require a SAS controller and cables (see configurator).
If the number of drives is greater than 12, an additional controller is required (see configurator).
Additional drives:
- up to two M.2 SATA Flash drives with fixed installation (requires installation of HPE Universal SATA HHHL 3yr Wty M.2 Kit);
- Flash-drive of format MicroSD with fixed installation;
- Internal USB-drive with fixed installation;
- Solid-state accelerators with installation in PCIe slots.
Pre-installed drives: no |
| Disk subsystem controller | Integrated RAID controller HPE Smart Array Embedded Software RAID S100i SR Controller
14 SATA 6Gb/s ports, RAID 0/1/10/5 support (Software RAID), Zero Memory, 2 ports are used for M.2 drives in the Riser card (optional)
Additionally in the connector on the motherboard:
RAID module HPE Smart Array E208i-a SR Gen10 ( 8 Int Lanes/No Cache) 12G SAS Modular Controller, RAID 0/1/10/5/JBOD
RAID module HPE Smart Array P408i-a SR Gen10 ( 8 Int Lanes/2GB Cache) 12G SAS Modular Controller, RAID 0/1/10/5/50/6/60/JBOD
RAID-module HPE Smart Array P816i-a SR Gen10 (16 Int 4GB Cache+Smart) 12G SAS Modular Controller, RAID 0/1/10/5/50/6/60/JBOD, Smart Cache
Additionally in PCIe slots:
Raid-controller HPE Smart Array E208i-p SR Gen10 (8 Int Lanes/No Cache) 12G SAS PCIe Plug-in Controller, RAID 0/1/10/5/JBOD
Raid-controller HPE Smart Array E208e-p SR Gen10 (8 Ext Lanes/No Cache) 12G SAS PCIe Plug-in Controller, RAID 0/1/10/5/JBOD
HPE Smart Array Raid Controller P408i-p SR Gen10 ( 8 Int Lanes/2GB Cache) 12G SAS PCIe Plug-in Controller, RAID 0/1/10/5/50/6/60/JBOD
HPE Smart Raid Controller Array P408e-p SR Gen10 (8 Ext Lanes/4GB Cache) 12G SAS PCIe Plug-in Controller, RAID 0/1/10/5/50/6/60/JBOD
Raid controller HPE Smart Array P824i-p MR Gen10 (24 Int Lanes/4GB Cache + CacheCade) 12G SAS PCIe Plug-in Controller, RAID 0/1/10/5/50/6/60/JBOD
When installing additional controllers, appropriate cable sets are required (see configurator). |
| Network controller | Integrated Network Controller HPE Ethernet 1Gb 4-port 369i Adapter
Management port 1GbE (Dedicated iLO connector) |
| Expansion slots | With one processor:
- Slot 1 PCIe 3.0 x16/x16 Full Length/Full Height Slot connection to CPU1
- Slot 2 PCIe 3.0 x4/x8 Full Length/Full Height Slot connection to CPU1
- Slot 3 PCIe 3.0 x16/x16 Full Length/Full Height Slot connection to CPU1
- Slot 4 PCIe 3.0 x4/x8 Full Length/Full Height Slot connection to CPU1
When installing a second processor:
- Slot 5 PCIe 3.0 x16/x16 Full Length/Full Height Slot connection to CPU2
- Slot 6 PCIe 3.0 x8/x8 Full Length/Full Height Slot connection to CPU2
- Slot 7 PCIe 3.0 x16/x16 Full Length/Full Height Slot connection to CPU2
- Slot 8 PCIe 3.0 x8/x8 Full Length/Full Height Slot connection to CPU2 |
| Optical storage | DVD-RW or DVD-ROM Drive (optional), requires installation kit
Adding a 3rd drive cage to Box-1 is not possible when installing an optical drive
HPE Mobile USB Non Leaded System DVD RW Drive (optional) |
| Interfaces | Front: 2 x USB 3.0, iLO Service Port
Rear: 2 x USB 3.0, DB-15 Video, Display Port, 4 x GbE RJ-45, 1GbE RJ-45 Management Port, Serial Port
Internal Ports: Micro SD Slot, 1 x USB 3.0, 1 x USB 2.0 |
| Video adapter | Integrated Matrox G200 video standard, 1280 x 1024 (32 bpp), 1600 x 1200 (16 bpp)
Up to four HPE NVIDIA Quadro Graphics Accelerator GPUs |
| Power Unit | x HPE 500W Hot-Swappable Power Supply, Platinum (94%)
Optional for a second 500W hot-swappable power supply with redundancy |
| Cooling | non-redundant managed system fans
Requires installation of a hot-swap fan kit (HPE ML350 Gen10 Redundant Fan Cage Kit with 4 Fan Modules)
in the following cases:
- when installing three drive cages;
- when installing NVMe drives;
- when installing two drive cages and any additional devices in Box-1;
- when installing a second processor;
- when installing SAS 10K or larger drives;
- when installing M.2 drives;
- when installing HPE Ethernet 10Gb 2-port 521T Adapter or 25 Gigabit Ethernet adapters;
- when installing graphics accelerators;
- when installing the server in a rack. |
| Supported Operating Systems | Windows Server 2012 R2
Windows Server 2016 LTSC
Windows Server 2019 LTSC
Microsoft Hyper-V Server 2012 R2, 2016 & 2019
VMware vSphere 6.0 U3, 6.5 U2 & 6.7 U1
Red Hat Enterprise Linux (RHEL) 7.6 with Kbase (includes KVM) SUSE Linux Enterprise Server (SLES) 12 SP3, 12 SP4, 15,
ClearOS/ClearVM 7.6, 8.0 |
| Rack mount installation | Rack Mount Kit with Slide-out Rails and Cable Management (Optional) |
| Built-in controls | HPE iLO (HPE Integrated Lights-Out) 4GB NAND, Firmware HPE iLO5 - status monitoring, alerts and reports, remote management
UEFI - secure server configuration and boot in accordance with the industry standard Unified Extensible Firmware Interface (UEFI)
HPE RESTful API - application developer interface
Intelligent Provisioning - a tool for automated deployment of server infrastructure
Embedded Remote Support - built-in remote support tools that provide automatic transmission of information about hardware events to HP service departments |
| BIOS | HPE Server Unified Extensible Firmware Interface (UEFI) |
| Dimensions | Height 46.25 cm, Width 17.4 cm, Depth 64.8 cm (Pedestal)
Height 21.85 cm, Width 44.5 cm, Depth 64.8 cm (When installed in a rack) |
| Weight | Minimum 21 kg, maximum 42 kg |
| Power supply | 100/240 VAC, 6.7/3.3 A, 50/60 Hz |
| Operating Environment | Operating temperature from +10°C to +35°C
Storage temperature from -30°C to +60°C
Humidity no more than 90% |
| Noise level | Idle - 28 dBA
Under load - 29 dBA |
| Warranty | 1 year warranty, service center |