| Characteristic |
Description |
 | |
| Base Configuration | HPE ProLiant ML350 Gen10, part number P21789-421 |
| Form Factor | Pedestal, convertible for rack mounting (5U height) |
| CPU | Intel Xeon Silver 4214R processor: 12 cores, 16.5MB L3 cache, 2.4GHz operating frequency, 2 UPI channels 9.6GT/s
Maximum number of processors per server - 2, 48 logical CPUs per system (with Hyper-Threading technology)
Maximum RAM frequency supported by the processor, 2400MHz |
| Chipset | Intel C621 Series Chipset |
| RAM | Preinstalled 32GB memory: 1 HPE 32GB Dual Rank x4 DDR4-2933 CAS-21-21-21 Registered Memory Kit
Supported memory types:
HPE SmartMemory DDR4 Registered DIMM (RDIMM) - up to 24 modules
HPE SmartMemory DDR4 Load Reduced DIMM (LRDIMM) - up to 24 modules
Maximum RAM 2048GB (16x128GB) for LRDIMM, 1536GB (24x64GB) for RDIMM
Six-channel memory controller integrated into the CPU: 24 slots per server, 12 slots per CPU, 2 slots per channel
Memory operating frequency 2400MHz (limited by the processor)
Maximum memory subsystem bandwidth 115.2 GB/s per processor
Support for HPE SmartMemory, Advanced ECC, Online Spare technologies |
| Disk subsystem | Up to 8 Hot Plug 2.5" SFF SATA/SAS HDD/SSD hot-swappable drives.
Additional cages of the following types (up to two additional cages in total):
- 1 or 2 cages for 4 Hot Plug 3.5" LFF SATA/SAS HDD/SSD hot-swappable drives;
- 1 or 2 cages for 8 Hot Plug 2.5" SFF SATA/SAS HDD/SSD hot-swappable drives;
- 1 cage for 8 Hot Plug 2.5" SFF NVMe PCIe x4 SSD hot-swappable drives (includes riser with ports for 8 NVMe drives and cables, occupies slots 1 and 3).
Drive set options: 24 SFF / 8 SFF + 8 LFF / 8 SFF + 8 NVMe + 4 LFF / 16 SFF + 4 LFF / 16 SFF + 8 NVMe (all hot-swap drives).
Additional SAS drives (more than 8) require an additional SAS controller and cables (see configurator).
Additional SATA drives can be connected to the integrated S100i controller (12 ports, cables required, see configurator).
Additional drives:
- up to two fixed-installation M.2 SATA flash drives (requires HPE Universal SATA HHHL 3yr Wty M.2 Kit);
- fixed-installation MicroSD flash drive;
- fixed-installation internal USB drive;
- solid-state accelerators installed in PCIe slots.
Pre-installed drives: none |
| Disk subsystem controller | RAID module HPE Smart Array P408i-a SR Gen10 (8 Int Lanes/2GB Cache) 12G SAS Modular Controller, RAID 0/1/10/5/50/6/60/JBOD
Cache protection battery included.
Optional in the connector on the motherboard:
RAID module HPE Smart Array P816i-a SR Gen10 (16 Int 4GB Cache+Smart) 12G SAS Modular Controller, RAID 0/1/10/5/50/6/60/JBOD, Smart Cache
Additional in slots PCIe:
HPE Smart Array E208i-p SR Gen10 Raid Controller (8 Int Lanes/No Cache) 12G SAS PCIe Plug-in Controller, RAID 0/1/10/5/JBOD
HPE Smart Array E208e-p SR Gen10 Raid Controller (8 Ext Lanes/No Cache) 12G SAS PCIe Plug-in Controller, RAID 0/1/10/5/JBOD
Raid controller HPE Smart Array P408i-p SR Gen10 (8 Int Lanes/2GB Cache) 12G SAS PCIe Plug-in Controller, RAID 0/1/10/5/50/6/60/JBOD
Raid controller HPE Smart Array P408e-p SR Gen10 (8 Ext Lanes/4GB Cache) 12G SAS PCIe Plug-in Controller, RAID 0/1/10/5/50/6/60/JBOD
Raid controller HPE Smart Array P824i-p MR Gen10 (24 Int Lanes/4GB Cache + CacheCade) 12G SAS PCIe Plug-in Controller, RAID 0/1/10/5/50/6/60/JBOD
When installing additional controllers, appropriate cable kits are required (see configurator). |
| Network controller | Integrated Network Controller HPE Ethernet 1Gb 4-port 369i Adapter
Management port 1GbE (Dedicated iLO connector) |
| Expansion slots | With one processor:
- Slot 1 PCIe 3.0 x16/x16 Full Length/Full Height Slot connection to CPU1
- Slot 2 PCIe 3.0 x4/x8 Full Length/Full Height Slot connection to CPU1
- Slot 3 PCIe 3.0 x16/x16 Full Length/Full Height Slot connection to CPU1
- Slot 4 PCIe 3.0 x4/x8 Full Length/Full Height Slot connection to CPU1
When installing a second processor:
- Slot 5 PCIe 3.0 x16/x16 Full Length/Full Height Slot connection to CPU2
- Slot 6 PCIe 3.0 x8/x8 Full Length/Full Height Slot connection to CPU2
- Slot 7 PCIe 3.0 x16/x16 Full Length/Full Height Slot connection to CPU2
- Slot 8 PCIe 3.0 x8/x8 Full Length/Full Height Slot connection to CPU2 |
| Optical storage | DVD-RW or DVD-ROM Drive (optional), requires installation kit
Adding a 3rd drive cage to Box-1 is not possible when installing an optical drive
HPE Mobile USB Non Leaded System DVD RW Drive (optional) |
| Interfaces | Front: 2 x USB 3.0, iLO Service Port
Rear: 2 x USB 3.0, DB-15 Video, Display Port, 4 x GbE RJ-45, 1GbE RJ-45 Management Port, Serial Port
Internal Ports: Micro SD Slot, 1 x USB 3.0, 1 x USB 2.0 |
| Video adapter | Integrated Matrox G200 video standard, 1280 x 1024 (32 bpp), 1600 x 1200 (16 bpp)
Up to four HPE NVIDIA Quadro Graphics Accelerator GPUs |
| Power Unit | x HPE 800W Hot-Swappable Platinum (94%) Power Supply
Optional for a second 800W hot-swappable power supply with redundancy |
| Cooling | 6 hot-swappable, redundant, controllable system fans |
| Supported Operating Systems | Windows Server 2012 R2
Windows Server 2016 LTSC
Windows Server 2019 LTSC
Microsoft Hyper-V Server 2012 R2, 2016 & 2019
VMware vSphere 6.0 U3, 6.5 U2 & 6.7 U1
Red Hat Enterprise Linux (RHEL) 7.6 with Kbase (includes KVM) SUSE Linux Enterprise Server (SLES) 12 SP3, 12 SP4, 15,
ClearOS/ClearVM 7.6, 8.0 |
| Rack mount installation | Rack Mount Kit with Slide-out Rails and Cable Management (Optional) |
| Built-in controls | HPE iLO (HPE Integrated Lights-Out) 4GB NAND, Firmware HPE iLO5 - status monitoring, alerts and reports, remote management
UEFI - secure server configuration and boot in accordance with the industry standard Unified Extensible Firmware Interface (UEFI)
HPE RESTful API - application developer interface
Intelligent Provisioning - a tool for automated deployment of server infrastructure
Embedded Remote Support - built-in remote support tools that provide automatic transmission of information about hardware events to HP service departments |
| BIOS | HPE Server Unified Extensible Firmware Interface (UEFI) |
| Dimensions | Height 46.25 cm, Width 17.4 cm, Depth 64.8 cm (Pedestal)
Height 21.85 cm, Width 44.5 cm, Depth 64.8 cm (When installed in a rack) |
| Weight | Minimum 21 kg, maximum 42 kg |
| Power supply | 100/240 VAC, 6.7/3.3 A, 50/60 Hz |
| Operating Environment | Operating temperature from +10°C to +35°C
Storage temperature from -30°C to +60°C
Humidity no more than 90% |
| Noise level | Idle - 31 dBA
Under load - 32 dBA |
| Warranty | 1 year warranty, service center |