| Characteristic |
Description |
 | | | Base Configuration | HPE ProLiant DL580 Gen10, part number P22709-B21 |
| Form Factor | 4U, rack mountable |
| CPU | 4 Intel Xeon Gold 6230 processors: 20 cores, 27.5MB L3 cache, 2.1GHz operating frequency, 3 UPI channels 10.4GT/s
Maximum number of processors per server - 4, 160 logical CPUs per system with Intel Hyper-Threading technology
Effective operating frequency of RAM 2933MHz |
| Chipset | Intel C621 Series Chipset |
| RAM | Preinstalled memory capacity of 256 GB: 8 modules HPE 32GB Dual Rank x4 DDR4-2933 CAS-21-21-21 Registered Memory Kit
Supported memory types: HPE SmartMemory DDR4 Load Reduced DIMM (LRDIMM), DDR4 Registered DIMM (RDIMM)
Maximum RAM capacity of 4096 GB (32x128 GB) for LRDIMM, 3072 GB (48x64 GB) for RDIMM when installing 4 processors
Six-channel memory controller integrated into the CPU: 48 slots per server, 12 slots per CPU, 2 modules per channel
Operating memory frequency of 2933 MHz
Maximum memory subsystem bandwidth of 140 GB / s per processor
Support for HPE SmartMemory, Advanced ECC, Online technologies Spare |
| Disk subsystem | Installed cage:
- Cage for 8 Hot Plug 2.5" SFF SAS/SATA HDD/SSD drives with hot swap
Possible cage options (up to 6 cages of different types in total):
- Cage for 8 Hot Plug 2.5" SFF SAS/SATA HDD/SSD drives with hot swap (up to 6 cages)
- Cage for 8 Hot Plug 2.5" SFF SAS/SATA drives or 6 SAS/SATA + 2 NVMe hot swap drives (up to 3 cages)
- Cage for 8 Hot Plug 2.5" SFF NVMe drives with hot swap (up to 3 cages)
- Universal media bay: Hot Plug 2.5" SFF SAS/SATA HDD/SSD cage (opt.), optical drive (opt.), 2 USB ports 2.0, Display Port
Maximum number of drives of different types (up to 48 drives in total):
- up to 48 Hot Plug 2.5" SFF SAS/SATA HDD/SSD hot-swappable drives
- up to 20 Hot Plug 2.5" SFF NVMe hot-swappable drives
Additional drives:
- up to two fixed-install M.2 SATA 2280 flash drives (requires HPE Universal SATA HHHL 3yr Wty M.2 Kit);
- up to two M.2 SATA UFF flash drives in SFF bay;
- M.2 SATA AIC flash drive in PCIe slot;
- fixed-install MicroSD flash drive;
- fixed-install internal USB flash drive;
- NVMe solid-state accelerators installed in PCIe slots. |
| Disk subsystem controller | HPE Smart Array P408i-p SR Gen10 Raid Controller (8 Int Lanes/2GB Cache) 12G SAS PCIe Plug-in Controller, RAID 0/1/10/5/50/6/60/JBOD
Cache protection battery included
Additionally in PCIe slots:
HPE Smart Array E208i-p SR Gen10 Raid Controller (8 Int Lanes/No Cache) 12G SAS PCIe Plug-in Controller, RAID 0/1/10/5/JBOD
HPE Smart Array E208e-p SR Gen10 Raid Controller (8 Ext Lanes/No Cache) 12G SAS PCIe Plug-in Controller, RAID 0/1/10/5/JBOD
HPE Smart Array P408e-p SR Gen10 Raid Controller (8 Ext Lanes/4GB Cache) 12G SAS PCIe Plug-in Controller, RAID 0/1/10/5/50/6/60/JBOD
24 SFF SAS/SATA Port Expanders to PCIe Slot |
| Network controller | HPE FlexFabric FlexibleLOM Adapter 10Gb 2-port 533FLR-T Replacement I/O Module
1GbE Management Port (Dedicated iLO connector)
Additional NICs in expansion slots |
| Expansion slots | Three bays for installing riser cards,
Possible options for the Riser-1 bay:
- Riser card for 7 PCIe 3.0 slots: x8, x16, x8 CPU1 FH-3/4L; x8, x16, x8, x16 CPU3 FH-FL (installed by default, all slots work);
- Riser card for 6 PCIe 3.0 slots: x8, x8, x8 CPU1 FH-3/4L; x16, x8, x16 CPU3 FH-FL, 2 x8 ports for 4 NVMe drives (CPU1, CPU3);
- Riser card without PCIe slots: 8 x8 ports for 16 NVMe drives (CPU1, CPU3);
Possible options for Riser-2 andRiser-3 bays (one set for both bays):
- Riser card with 9 PCIe 3.0 slots: x8, x16, x8, x8, x8 CPU2 FH-3/4L; x8, x16, x8, x16 CPU4 FH-FL (installed by default, all slots work);
- Riser card with 8 PCIe 3.0 slots: x8, x8, x8, x8, x8 CPU2 FH-3/4L; x16, x8, x16 CPU4 FH-FL, 2 x8 ports for 4 NVMe drives (CPU2, CPU4); |
| Optical storage | DVD-RW or DVD-ROM optical drive
Requires Universal Media bay installation |
| Interfaces | Front: 2 USB 3.0 ports, iLO Front Service Port
Additional front panel ports when installing Universal Media bay: 2 USB 2.0 ports, Display Port
Rear: 2 USB 3.0 ports, 2 USB 2.0 ports, DB-15 video connector, 4 GbE RJ-45 ports, 1GbE RJ-45 management port, serial port
Internal ports: Micro SD Slot (2nd optional), 1 USB 3.0 port |
| Video adapter | Integrated Matrox G200 video standard, 1280 x 1024 (32 bpp), 1920 x 1200 (16 bpp) |
| Power Unit | 4 x 1600W hot-swappable redundant power supplies, Platinum (94%) |
| Cooling | 12 hot-swappable and redundant system fans |
| Supported Operating Systems | Windows Server 2012 R2
Windows Server 2016
Windows Server 2019
VMware ESXi 6.0 U3
VMware ESXi 6.5 U2
VMware ESXi 6.7 U1
Red Hat Enterprise Linux (RHEL) 7.6 and 8.0
SUSE Linux Enterprise Server (SLES) 12 SP4,12 SP3 and 15 SP1
CentOS 7.6 |
| Rack mount installation | Set of retractable rails with cable organizer
Additionally:
- protective panel with lock |
| Built-in controls | HPE iLO (HPE Integrated Lights-Out) 4GB NAND, Firmware HPE iLO5 - status monitoring, alerts and reports, remote management
UEFI - secure server configuration and boot in accordance with the industry standard Unified Extensible Firmware Interface (UEFI)
HPE RESTful API - application developer interface
Intelligent Provisioning - a tool for automated deployment of server infrastructure
Embedded Remote Support - built-in remote support tools that provide automatic transmission of information about hardware events to HP service departments |
| BIOS | HPE Server Unified Extensible Firmware Interface (UEFI) |
| Dimensions | Height 17.48 cm (4U), Width 44.55 cm, Depth 75.18 cm |
| Weight | Minimum 30 kg, maximum 51 kg |
| Power supply | 100/240 VAC, 8.3/6.6A, 50/60 Hz |
| Operating Environment | Operating temperature from +10°C to +35°C
Storage temperature from -30°C to +60°C
Humidity no more than 90% |
| Warranty | 1 year warranty, service center |
|