| Characteristic |
Description |
 | |
| Base Configuration | HPE ProLiant DL360 Gen10, part number P24740-B21 |
| Form Factor | 1U, rack mountable |
| CPU | 1 Intel Xeon Gold 5218R processor: 20 cores, 27.5 MB L3 cache, 2.1 GHz operating frequency, 2 UPI 10.4 GT/s channels, 125 W TDP
Maximum number of processors per server - 2, 80 logical CPUs per system in Hyper-Threading mode
Maximum RAM frequency supported by the processor, 2666 MHz
Maximum RAM capacity supported by the processor, 1 TB |
| Chipset | Intel C621 Series Chipset |
| RAM | Preinstalled 32 GB memory: 1 HPE 32GB (1x32GB) Dual Rank x4 DDR4-2933 CAS-21-21-21 Registered Smart Memory Kit
Supported memory types:
HPE SmartMemory DDR4 Registered DIMM (RDIMM) - up to 24 modules
HPE SmartMemory DDR4 Load Reduced DIMM (LRDIMM) - up to 24 modules
Maximum RAM 2048 GB (16x128 GB) for LRDIMM, 1536 GB (24x64 GB) for RDIMM
Six-channel memory controller integrated into the CPU: 24 slots per server, 12 slots per CPU, 2 modules per channel
Memory operating frequency 2666 MHz (limited by the processor)
Maximum bandwidth 128 GB/s memory subsystems per processor
Support for HPE SmartMemory, Advanced ECC, Online Spare technologies |
| Disk subsystem | Up to 8 Hot Plug 2.5" SFF SAS/SATA HDD/SSD hot-swap drives
Additional in Universal Media Bay on the front panel (one of the following):
- 2-drive cage for hot-swap SAS/SATA SFF HDD/SSD drives
- 2-drive cage for hot-swap NVMe SFF drives (includes Riser1 (x16 FH, x8 LP slots) with 2 NVMe ports and cables);
- 4-drive cage for hot-swap M.2 SATA UFF drives
- DVD-RW or DVD-ROM cage + Display port & USB 2.0.
Additional in the rear panel bay instead of Slot1 Riser1 (one of the following):
- 1-drive hot-swap SAS/SATA SFF HDD/SSD drive
- 2-drive M.2 SATA UFF drives hot-swappable
Additionally up to 2 M.2 SATA 2280 drives with one of the following installation options:
- via optional Riser1 (x16 FH, x16 LP slots);
- via an adapter installed in the PCIe expansion slot.
Optional cage for 10 PCIe x4 NVMe drives (8 SAS/SATA/NVMe drives + 2 NVMe drives).
The cage includes Riser2 (without PCIe slot) with 10 ports for NVMe drives and connection cables. |
| Disk subsystem controller | Integrated S100i SW controller, 14 ports SATA 6Gb/s, support for RAID 0/1/10/5, Software RAID, UEFI Mode
Additional:
RAID module HPE Smart Array E208i-a 12Gb SAS Controller (RAID 1/10/5/HBA) 8 Ports Internal, Smart Path
RAID module HPE Smart Array P408i-a 12Gb SAS Controller (RAID 1/10/5/50/6/60/HBA) 8 Ports Internal, Smart Path, 2GB Cache, Smart Cache (opt)
RAID module HPE Smart Array P816i-a 12Gb SAS Controller (RAID 1/10/5/50/6/60/HBA) 16 Ports Internal, Smart Path, 4GB Cache, Smart Cache
RAID Controller HPE Smart Array E208i-p 12Gb SAS Controller (RAID 1/10/5/HBA) 8 Ports Internal, Smart Path
RAID Controller HPE Smart Array E208e-p 12Gb SAS Controller (RAID 1/10/5/HBA) 8 Ports External, Smart Path
RAID Controller HPE Smart Array P408i-p 12Gb SAS Controller (RAID 1/10/5/50/6/60/HBA) 8 Ports Internal, Smart Path, 2GB Cache, Smart Cache (opt)
RAID Controller HPE Smart Array P408e-p 12Gb SAS Controller (RAID 1/10/5/50/6/60/HBA) 8 Ports Externel, Smart Path, 4GB Cache, Smart Cache (opt)
Installing NVMe drives requires additional cages (2 or 10 drives).
Connecting NVMe drives via the riser card and cables included with the cage. |
| Network controller | HPE Ethernet 10Gb 2-port FLR-T X550-AT2 Adapter Replacement I/O Module
1GbE Management Port (Dedicated iLO connector) |
| Expansion slots | Riser Card 1 (CPU1):
Slot 1 PCIe 3.0 x16/x16 3/4 Length/Full Height Slot connection to CPU1
Slot 2 PCIe 3.0 x8/x8 Low Profile Slot connection to CPU1
Optional Riser Card 1 with 2 M.2 2280 SATA ports:
Slot 1 PCIe 3.0 x16/x16 3/4 Length/Full Height Slot connection to CPU1
Slot 2 PCIe 3.0 x16/x16 Low Profile Slot connection to CPU1
Optional Riser Card 1 with 2 PCIe x4 NVMe ports (comes with a cage for 2 NVMe drives):
Slot 1 PCIe 3.0 x16/x16 3/4 Length/Full Height Slot connection to CPU1
Slot 2 PCIe 3.0 x8/x8 Low Profile Slot connection to CPU1
Riser Card 2, optional (CPU2):
Slot 3 PCIe 3.0 x16/x16 Low Profile Slot connection to CPU2
Riser Card 2, optional (CPU2), Slot 2 Riser Card 1 is not supported:
Slot 3 PCIe 3.0 x16/x16 3/4 Length/Full Height Slot connection to CPU2
When installing a cage for 10 PCIe x4 NVMe drives, installation of Riser Card 2 is not supported |
| Optical storage | HPE SATA DVD-RW Optical Drive (optional)
Requires installation of DVD-RW or DVD-ROM + Display port & USB 2.0 cage in the Universal Media Bay on the front panel |
| Interfaces | Front: 1 x USB 3.0, iLO Service Port, optional: Display Port, USB 2.0 port
Rear: 2 x USB 3.0, DB-15 Video Connector, 4 x GbE RJ-45, 1GbE RJ-45 Management Port, Serial Port (optional)
Internal Ports: Micro SD Slot, 2 x USB 3.0 |
| Video adapter | Integrated Matrox G200 video standard, 1280 x 1024 (32 bpp), 1920 x 1200 (16 bpp)
Up to two HPE NVIDIA Graphics Accelerator GPUs |
| Power Unit | x HPE 800W Hot-Swappable Redundant Platinum-level Power Supply (94%) OR
2 x HPE 800W Hot-Swappable Redundant Platinum-level Power Supplies (94%) |
| Cooling | hot-swappable, redundant, controllable system fans in 1-processor configurations
7 hot-swappable, redundant, controllable system fans in 2-processor configurations
Optional: High-efficiency cooling system for operation above 35°C. |
| Supported Operating Systems | Windows Server 2019: Essentials, Standard, Datacenter
Windows Server 2016: Essentials, Standard, Datacenter
Windows Server 2012 R2: Essentials, Standard, Datacenter
Microsoft Hyper-V Server: 2012 R2, 2016 & 2019
VMware vSphere: 6.0 U3, 6.5 U2 & 6.7 U1
ClearVM: 7.6 & 8.0
Red Hat Enterprise Linux (RHEL): 7.6 w/ Kbase (64-bit only)
SUSE Linux Enterprise Server (SLES): 12 SP4 and 15 SP1 (includes Xen) (64-bit only) |
| Rack mount installation | HPE 1U Small Form Factor Easy Install Rail Kit
Additional:
- Cable management
- Front panel overlay with locking capability
- HPE 1U Gen10 SFF Ball Bearing Rail Kit |
| Built-in controls | HPE iLO (HPE Integrated Lights-Out) 4GB NAND, Firmware HPE iLO5 - status monitoring, alerts and reports, remote management
UEFI - secure server configuration and boot in accordance with the industry standard Unified Extensible Firmware Interface (UEFI)
HPE RESTful API - application developer interface
Intelligent Provisioning - a tool for automated deployment of server infrastructure
Embedded Remote Support - built-in remote support tools that provide automatic transmission of information about hardware events to HP service departments |
| BIOS | HPE Server Unified Extensible Firmware Interface (UEFI) |
| Dimensions | Height 4.29 cm, Width 43.46 cm, Depth 70.7 cm |
| Weight | Minimum 13 kg, maximum 16 kg |
| Power supply | 100/240 VAC, 6.7/3.3 A, 50/60 Hz |
| Operating Environment | Operating temperature from +10°C to +35°C
Storage temperature from -30°C to +60°C
Humidity no more than 90% |
| Noise level | Idle - 32 dBa (1P) / 36 dBa (2P)
Under load - 35 dBa (1P) / 38 dBa (2P) |
| Warranty | 1 year warranty, service center |