| Characteristic |
Description |
 | |
| Base Configuration | HPE ProLiant DL365 Gen10 Plus, article number P39366-B21 |
| Form Factor | 1U, rack mountable |
| CPU | 1 AMD EPYC 7262 processor, operating frequency 3.2-3.4 GHz, 8 cores, L3 cache 128MB, 155W
Maximum number of processors per server - 2
Maximum effective RAM frequency supported by the processor, 3200 MT/s
Maximum amount of RAM supported by the processor, 4TB |
| Chipset | System on Chip (SoC) design |
| RAM | Preinstalled 32 GB memory: 1 HPE 32GB (1x 32GB) Single Rank x4 DDR4-3200 CAS-22-22-22 Registered Smart Memory Kit
Supported memory types:
HPE SmartMemory DDR4 Registered DIMM (RDIMM) - up to 32 modules
HPE SmartMemory DDR4 Load Reduced DIMM (LRDIMM) - up to 32 modules
Maximum RAM 8192 GB (32x256 GB) for LRDIMM, 2048 GB (32x64 GB) for RDIMM
Eight-channel memory controller integrated into the CPU: 32 slots per server, 16 slots per CPU, 2 modules per channel
Memory operating frequency 3200 MT/s (1 DPC), 3200 MT/s (2 DPC), DPC - DIMM Per Channel
Maximum memory subsystem bandwidth of 205 GB/s (per CPU)
Support for HPE SmartMemory technology |
| Disk subsystem | Up to 8 Hot Plug 2.5" SFF SAS/SATA HDD/SSD hot-swap drives
Optional:
- Up to 2 Hot Plug 2.5" SFF SAS/SATA HDD/SSD hot-swap drives in front panel cage (connect to SAS or SATA controller) OR
- Up to 2 Hot Plug 2.5" SFF SAS/SATA/U.3 HDD/SSD hot-swap drives in front panel cage (connect to Tri-Mode controller or NVMe ports) OR
- Up to 2 Hot Plug 2.5" SFF U.2/U.3 NVMe SSD hot-swap drives in front panel cage (connect to Tri-Mode controller or NVMe ports)
- 2 M.2 PCIe 3.0 x8 22110 drives in PCIe expansion card (RAID support 0/1)
- 2 x M.2 PCIe 3.0 x8 22110 drives in riser card (optional, RAID 0/1 support)
- 2 x M.2 SATA drives in PCIe expansion card (optional)
- MicroSD drive in USB connector, RAID1 support
- PCIe SSDs in expansion slots |
| Disk subsystem controller | RAID module HPE Smart Array P408i-a 12Gb SAS Controller (RAID 1/10/5/50/6/60/HBA) 8 Ports Internal, Smart Path, 2GB Cache, Smart Cache
Controller cache protection battery
Integrated S100i controller
Optional in the connector on the motherboard:
RAID module HPE Smart Array P816i-a SR Gen10 (16 Int 4GB Cache+Smart) 12G SAS Modular Controller, RAID 0/1/10/5/50/6/60/JBOD, Smart Cache
Additionally in expansion slots:
RAID controllers HPE Smart Array or Tri-Mode controller according to the configurator list |
| Network controller | Installed HPE Ethernet 1Gb 4-port BASE-T I350-T4 OCP3 Adapter Replaceable I/O Module
Additional network adapters in expansion slots
1GbE management port (Dedicated iLO management port) |
| Expansion slots | Riser Card 1:
Slot 1 PCIe 4.0 x16/x16 Full Length/Full Height Slot
Slot 2 PCIe 4.0 x16/x16 Low Profile Slot
Riser Card 1 (optional):
Slot 1 PCIe 4.0 x16/x16 Full Length/Full Height Slot
Slot 2 PCIe 4.0 x8/x16 Low Profile Slot
2 PCIe 3.0 x4 slots for M.2 NVMe 22110 drives, RAID 0/1 support
Riser Card 2, optional (one of the following):
Slot 3 PCIe 4.0 x16/x16 Low Profile Slot
Slot 3 PCIe 4.0 x16/x16 Half-Length/Full Height Slot (only when Slot-2 of Riser-card-1 is free) |
| Optical storage | HPE SATA DVD-RW Optical Drive (optional, not compatible with optional drive cage)
Requires installation kit |
| Interfaces | Front: 1 x USB 3.1, iLO Service Port
Rear: 2 x USB 3.1, DB-15 Video, 4 x GbE RJ-45, 1GbE RJ-45 Management Port, Serial Port (optional)
Internal Ports: 2 x USB 3.1
Optional when installing the optical drive cage:
- Display Port
- 2 x USB 2.0 |
| Video adapter | Integrated video adapter, 16MB video memory, 1920 x 1200@60Hz (32 bpp) |
| Power Unit | x 500W hot-swappable power supply with redundancy when installing a second power supply |
| Cooling | 5 hot-swappable, redundant system fans (dual-rotor)
Optional high-performance fan kit |
| Supported Operating Systems | Windows Server 2016
Windows Server 2019 (Most Recent Version)
VMware ESXi 6.7 U3
VMware ESXi 7.0 U1/U2
SUSE Linux Enterprise Server (SLES) 12 SP5
SUSE Linux Enterprise Server (SLES) 15 SP2
Red Hat Enterprise Linux (RHEL)
? AMD EPYC 7003 Series Processors: 8.3
? AMD EPYC 7002 Series Processors: 7.6, 8.0 |
| Rack mount installation | Set of retractable rails for rack mounting
Additional:
- cable organizer
- front panel overlay with locking option
- case opening sensor |
| Built-in controls | HPE iLO (HPE Integrated Lights-Out), Firmware HPE iLO5 - status monitoring, alerts and reports, remote management
UEFI - secure server configuration and boot in accordance with the industry standard Unified Extensible Firmware Interface (UEFI)
HPE RESTful API - application developer interface
Intelligent Provisioning - a tool for automated deployment of server infrastructure
Embedded Remote Support - built-in remote support tools that provide automatic transmission of information about hardware events to HP service departments |
| BIOS | HPE Server Unified Extensible Firmware Interface (UEFI) |
| Dimensions | Height 4.28 cm, Width 43.46 cm, Depth 74.19 cm |
| Weight | Minimum 13 kg, maximum 18 kg |
| Power supply | 100/240 VAC, 6.7/3.3 A, 50/60 Hz |
| Operating Environment | Operating temperature from +10°C to +35°C
Storage temperature from -30°C to +60°C
Humidity no more than 90% |
| Noise level | Idle - 38 dBa
Under load - 38 dBa |
| Warranty | 1 year warranty, service center |