| Characteristic |
Description |
 | | | Base Configuration | HPE ProLiant DL380 Gen10, part number P40424-B21 |
| Form Factor | 2U, rack mountable |
| CPU | 1 Intel Xeon Gold 6234 processor: 8 cores, 24.75 MB L3 cache, 3.3 GHz operating frequency, 3 UPI 10.4 GT/s channels, 2FMA, 130 W TDP.
Maximum number of processors per server - 2, 64 logical CPUs per system (in Hyper-Threading mode).
Maximum RAM frequency supported by the processor, 2933 MHz.
Maximum amount of RAM supported by the processor, 1024 MB. |
| Chipset | Intel C621 Series Chipset |
| RAM | Preinstalled 32 GB memory: 1 HPE 32GB (1x32GB) Dual Rank x8 DDR4-2933 CAS-21-21-21 Registered Memory Kit
Supported memory types:
HPE SmartMemory DDR4 Registered DIMM (RDIMM) - up to 24 modules
HPE SmartMemory DDR4 Load Reduced DIMM (LRDIMM) - up to 24 modules
Maximum RAM 2048 GB (16x128 GB) for LRDIMM, 1536 GB (24x64 GB) for RDIMM
Six-channel memory controller integrated into the CPU: 24 slots per server, 12 slots per CPU, 2 modules per channel
Memory operating frequency 2933 MHz
Maximum memory subsystem bandwidth 140 GB/s per processor
Support for HPE SmartMemory, Advanced ECC, Online Spare technologies |
| Disk subsystem | Installed basket (Bay-3:
Up to 8 Hot Plug 2.5" SFF SAS/SATA HDD/SSD hot-swappable drives, connected to P408i-a SAS module
Additional baskets (optional in Bay-2andBay-1, possible options):
- Enclosure for 8 Hot Plug 2.5" SFF SAS/SATA HDD/SSD hot-swappable drives (RAID controller required)
- Enclosure for 8 Hot Plug 2.5" SFF SAS/SATA or 6 SAS/SATA + 2 NVMe hot-swappable drives (RAID controller and Riser card with 1 NVMe port required)
- Enclosure for 8 Hot Plug 2.5" SFF NVMe hot-swappable drives (Riser card with 4 NVMe ports, CPU2, High-Perf Fans required)
Additional enclosure (only in the Bay-1):
- Hot Plug 2.5" SFF SAS/SATA HDD/SSD or NVMe hot-swappable drive cage (requires Universal Media bay and 1-port NVMe riser card)
Additional rear panel cages for Riser-1 and Riser-2:
- Rear 2-drive cage for SFF SAS/SATA + x16 FH in Riser 1 / 2 (HPE DL38X Gen10 2SFF SAS/SATA Riser Kit)
Additional rear panel cage for Riser-3:
- 2-drive cage for SFF SAS/SATA (HPE DL38X Gen10 2SFF Front NVMe or Front/Rear SAS/SATA Kit)
Installed drives: no
Total up to 30 2.5" SFF SAS/SATA HDD/SSD drives, including up to 20 NVMe drives. |
| Disk subsystem controller | Integrated RAID controller HPE Smart Array Embedded Software RAID S100i SR Controller
14 SATA 6Gb/s ports, RAID 0/1/10/5 support (Software RAID), Zero Memory, 2 ports are used for M.2 drives in the Riser card (optional)
Additionally in the connector on the motherboard:
RAID module HPE Smart Array E208i-a SR Gen10 ( 8 Int Lanes/No Cache) 12G SAS Modular Controller, RAID 0/1/10/5/JBOD
RAID module HPE Smart Array P408i-a SR Gen10 ( 8 Int Lanes/2GB Cache) 12G SAS Modular Controller, RAID 0/1/10/5/50/6/60/JBOD
RAID-module HPE Smart Array P816i-a SR Gen10 (16 Int 4GB Cache+Smart) 12G SAS Modular Controller, RAID 0/1/10/5/50/6/60/JBOD, Smart Cache
Additionally in PCIe slots:
Raid-controller HPE Smart Array E208i-p SR Gen10 (8 Int Lanes/No Cache) 12G SAS PCIe Plug-in Controller, RAID 0/1/10/5/JBOD
Raid-controller HPE Smart Array E208e-p SR Gen10 (8 Ext Lanes/No Cache) 12G SAS PCIe Plug-in Controller, RAID 0/1/10/5/JBOD
HPE Smart Array Raid Controller P408i-p SR Gen10 ( 8 Int Lanes/2GB Cache) 12G SAS PCIe Plug-in Controller, RAID 0/1/10/5/50/6/60/JBOD
HPE Smart Raid Controller Array P408e-p SR Gen10 (8 Ext Lanes/4GB Cache) 12G SAS PCIe Plug-in Controller, RAID 0/1/10/5/50/6/60/JBOD
Raid controller HPE Smart Array P824i-p MR Gen10 (24 Int Lanes/4GB Cache+CacheCade) 12G SAS PCIe Plug-in Controller, RAID 0/1/10/5/50/6/60/JBOD
Port Expander 24 SFF SAS/SATA for Riser-1/Slot-3 for 24 internal ports 12Gb |
| Network controller | HPE Ethernet 10Gb 2-port FLR-SFP+ BCM57414 Adapter Replacement I/O Module
1GbE Management Port (Dedicated iLO connector)
Additional network adapters in PCIe slots |
| Expansion slots | Three bays for installing riser cards,
Possible riser card options for the Riser-1bay (connected to CPU1):
- Riser card for 3 PCIe 3.0 slots: x8 FHHL, x16 FHFL, x8 FHHL, 2 M.2 SATA 2280 connectors (installed by default);
- Riser card for 2 PCIe 3.0 slots: x16 FHFL, x16 FHFL (slots 1 and 2);
- Riser card for 2 PCIe 3.0 slots: x16 FHFL, x16 FHFL (slots 2 and 3, for double-width GPUs);
- 4-port riser card for connecting up to 8 NVMe drives in a cage in Box-3;
- Riser card for 1 PCIe 3.0 x16 FHHL slot and a cage for 2 2.5" SFF SAS/SATA Hot-Swap drives;
Possible Riser Card Options for the Riser-2 bay. font-style: normal;">(connects to CPU2, requires a second processor):
- 3-slot PCIe 3.0 riser card: x8 FHHL, x16 FHFL, x8 FHHL;
- 3-slot PCIe 3.0 riser card: x8 FHHL, x8 FHHL, x8 FHHL, 1 port for connecting 2 NVMe drives in a cage in the Universal Media Bay;
- 2-slot PCIe 3.0 riser card: x16 FHFL, x16 FHFL (slots 1 and 2);
- 2-slot PCIe 3.0 riser card: x16 FHFL, x16 FHFL (slots 2 and 3, for double-wide GPUs);
- 4-port riser card for connecting up to 8 NVMe drives in basket in the Box-2 compartment;
- Riser card for 1 PCIe 3.0 x16 FHHL slot and a basket for 2 2.5" SFF SAS/SATA Hot-Swap drives;
Possible options for riser cards for the Riser-3bay (connection to CPU2, a second processor is required):
- Riser card for 2 PCIe 3.0 slots: x8 FHHL, x8 FHHL;
- Riser card for 1 PCIe 3.0 slot: x16 FHHL;
- Riser card for 2 NVMe ports for connecting up to 2 NVMe drives in the basket in the Universal Media Bay.
- instead of a riser card, it is possible to install a basket for 2 SFF SAS/SATA drives (HPE DL38X Gen10 2SFF Front NVMe or Front/Rear SAS/SATA Kit) |
| Optical storage | DVD-RW Optical Drive (Optional)
Requires installation of Universal Media Bay in Bay-1 |
| Interfaces | On the front panel: 1 USB 3.0 port, iLO Front Service Port
Additional when installing Universal Media Bay: Display Port, 2 USB 2.0 connectors.
On the rear panel: 2 USB 3.0 ports, DB-15 video connector, 4 GbE RJ-45 ports, 1GbE RJ-45 management port, serial port (optional).
Internal ports: Micro SD Slot, 2 USB 3.0 ports. |
| Video adapter | Integrated Matrox G200 video standard, 1280 x 1024 (32 bpp), 1920 x 1200 (16 bpp)
Up to 5 additional video cards or graphic accelerators. |
| Power Unit | x 800W Platinum-level power supply (94%)
Additional second power supply for redundancy with hot-swappable capability |
| Cooling | 4 hot-swappable, redundant, managed system fans on 1-socket configurations
6 hot-swappable, redundant, managed system fans on 2-socket configurations
Optional: High-Performance Cooling (required on configurations with NVMe drives or GPUs) |
| Supported Operating Systems | Windows Server 2019: Essentials, Standard, Datacenter
Windows Server 2016: Essentials, Standard, Datacenter
Windows Server 2012 R2: Essentials, Standard, Datacenter
Microsoft Hyper-V Server: 2012 R2, 2016 & 2019
VMware vSphere 6.0 U3, 6.5 U2 & 6.7 U1
ClearVM: 7.6 & 8.0
Red Hat Enterprise Linux (RHEL) 7.6 w/ Kbase
SUSE Linux Enterprise Server (SLES) 12 SP4 and 15 SP1 (includes Xen) |
| Rack mount installation | HPE 2U Small Form Factor Easy Install Rail Kit
Cable management for slide rails
Optional:
- HPE 2U SFF Ball Bearing Rail Kit
- Cable management for slide rails
- Front bezel tamper evident cover |
| Built-in controls | HPE iLO (HPE Integrated Lights-Out) 4GB NAND, Firmware HPE iLO5 - status monitoring, alerts and reports, remote management
UEFI - secure server configuration and boot in accordance with the industry standard Unified Extensible Firmware Interface (UEFI)
HPE RESTful API - application developer interface
Intelligent Provisioning - a tool for automated deployment of server infrastructure
Embedded Remote Support - built-in remote support tools that provide automatic transmission of information about hardware events to HP service departments |
| BIOS | HPE Server Unified Extensible Firmware Interface (UEFI) |
| Dimensions | Height 8.73 cm, Width 44.55 cm, Depth 67.94 cm |
| Weight | Minimum 15 kg, maximum 23 kg |
| Power supply | 100/240 VAC, 6.7/3.3 A, 50/60 Hz |
| Operating Environment | Operating temperature from +10°C to +35°C
Storage temperature from -30°C to +60°C
Humidity no more than 90% |
| Noise level | Idle - 31 dBa
Under load - 31 dBa |
| Warranty | 1 year warranty, service center |
|