| Characteristic |
Description |
 | |
| Base Configuration | HPE ProLiant DL360 Gen10, part number P40636-B21 |
| Form Factor | 1U, rack mountable |
| CPU | Intel Xeon Silver 4208 processor: 8 cores, 11 MB L3 cache, 2.1 GHz operating frequency, 2 UPI channels 9.6 GT/s
Maximum number of processors per server - 2, 32 logical CPUs per system in Hyper-Threading mode
Maximum RAM frequency supported by the processor, 2400 MHz
Maximum RAM capacity supported by the processor, 1 TB |
| Chipset | Intel C621 Series Chipset |
| RAM | Preinstalled 32 GB memory: 1 HPE 32GB (1x32GB) Dual Rank x4 DDR4-2933 CAS-21-21-21 Registered Smart Memory Kit
Supported memory types:
HPE SmartMemory DDR4 Registered DIMM (RDIMM) - up to 24 modules
HPE SmartMemory DDR4 Load Reduced DIMM (LRDIMM) - up to 24 modules
Maximum RAM 2048 GB (16x128 GB) for LRDIMM, 1536 GB (24x64 GB) for RDIMM
Six-channel memory controller integrated into the CPU: 24 slots per server, 12 slots per CPU, 2 modules per channel
Memory operating frequency 2400 MHz (limited by the processor)
Maximum bandwidth 115.2 GB/s memory subsystem per processor
Support for HPE SmartMemory, Advanced ECC, Online Spare technologies |
| Disk subsystem | Up to 8 Hot Plug 2.5" SFF SAS/SATA HDD/SSD hot-swap drives
Additional in Universal Media Bay on the front panel (one of the following):
- 2-drive cage for hot-swap SAS/SATA SFF HDD/SSD drives
- 2-drive cage for hot-swap NVMe SFF drives (includes Riser1 (x16 FH, x8 LP slots) with 2 NVMe ports and cables);
- 4-drive cage for hot-swap M.2 SATA UFF drives
- DVD-RW or DVD-ROM cage + Display port & USB 2.0.
Additional in the rear panel bay instead of Slot1 Riser1 (one of the following):
- 1-drive hot-swap SAS/SATA SFF HDD/SSD drive
- 2-drive M.2 SATA UFF drives hot-swappable
Additionally up to 2 M.2 SATA 2280 drives with one of the following installation options:
- via optional Riser1 (x16 FH, x16 LP slots);
- via an adapter installed in the PCIe expansion slot.
Optional cage for 10 PCIe x4 NVMe drives (8 SAS/SATA/NVMe drives + 2 NVMe drives).
The cage includes Riser2 (without PCIe slot) with 10 ports for NVMe drives and connection cables. |
| Disk subsystem controller | HPE Smart Array P408i-a 12Gb SAS Controller RAID Module (RAID 1/10/5/50/6/60/HBA) 8 Ports Internal, Smart Path, 2GB Cache, Smart Cache
Controller Cache Protection Battery
Additional:
HPE Smart Array E208e-p 12Gb SAS Controller RAID Controller (RAID 1/10/5/HBA) 8 Ports External, Smart Path
HPE Smart Array P408e-p 12Gb SAS Controller RAID Controller (RAID 1/10/5/50/6/60/HBA) 8 Ports Externel, Smart Path, 4GB Cache, Smart Cache (opt)
Optional low-profile RAID modules when installing a GPU in Riser2:
HPE Smart RAID Module Array E208i-a 12Gb SAS Controller (RAID 1/10/5/HBA) 8 Ports Internal, Smart Path
RAID module HPE Smart Array P408i-a 12Gb SAS Controller (RAID 1/10/5/50/6/60/HBA) 8 Ports Internal, Smart Path, 2GB Cache, Smart Cache (opt)
RAID module HPE Smart Array P816i-a 12Gb SAS Controller (RAID 1/10/5/50/6/60/HBA) 16 Ports Internal, Smart Path, 4GB Cache, Smart Cache
Installing NVMe drives requires additional cages (for 2 or 10 drives).
Connecting NVMe drives via a riser card and cables included with the cage. |
| Network controller | HPE Ethernet FlexibleLOM Adapter 1Gb 4-port 366FLR Replacement I/O Module
1GbE Management Port (Dedicated iLO connector) |
| Expansion slots | Riser Card 1 (CPU1):
Slot 1 PCIe 3.0 x16/x16 3/4 Length/Full Height Slot connection to CPU1
Slot 2 PCIe 3.0 x8/x8 Low Profile Slot connection to CPU1
Optional Riser Card 1 with 2 M.2 2280 SATA ports:
Slot 1 PCIe 3.0 x16/x16 3/4 Length/Full Height Slot connection to CPU1
Slot 2 PCIe 3.0 x16/x16 Low Profile Slot connection to CPU1
Optional Riser Card 1 with 2 PCIe x4 NVMe ports (comes with a cage for 2 NVMe drives):
Slot 1 PCIe 3.0 x16/x16 3/4 Length/Full Height Slot connection to CPU1
Slot 2 PCIe 3.0 x8/x8 Low Profile Slot connection to CPU1
Riser Card 2, optional (CPU2):
Slot 3 PCIe 3.0 x16/x16 Low Profile Slot connection to CPU2
Riser Card 2, optional (CPU2), Slot 2 Riser Card 1 is not supported:
Slot 3 PCIe 3.0 x16/x16 3/4 Length/Full Height Slot connection to CPU2
When installing a cage for 10 PCIe x4 NVMe drives, installation of Riser Card 2 is not supported |
| Optical storage | HPE SATA DVD-RW Optical Drive (optional)
Requires installation of DVD-RW or DVD-ROM + Display port & USB 2.0 cage in the Universal Media Bay on the front panel |
| Interfaces | Front: 1 x USB 3.0, iLO Service Port, optional: Display Port, USB 2.0 port
Rear: 2 x USB 3.0, DB-15 Video Connector, 4 x GbE RJ-45, 1GbE RJ-45 Management Port, Serial Port (optional)
Internal Ports: Micro SD Slot, 2 x USB 3.0 |
| Video adapter | Integrated Matrox G200 video standard, 1280 x 1024 (32 bpp), 1920 x 1200 (16 bpp)
Up to two HPE NVIDIA Graphics Accelerator GPUs |
| Power Unit | x HPE 800W Hot-Swappable Redundant Platinum-level Power Supply (94%) OR
2 x HPE 800W Hot-Swappable Redundant Platinum-level Power Supplies (94%) |
| Cooling | hot-swappable, redundant, controllable system fans in 1-processor configurations
7 hot-swappable, redundant, controllable system fans in 2-processor configurations
Optional: High-efficiency cooling system for operation above 35°C. |
| Supported Operating Systems | Windows Server 2019: Essentials, Standard, Datacenter
Windows Server 2016: Essentials, Standard, Datacenter
Windows Server 2012 R2: Essentials, Standard, Datacenter
Microsoft Hyper-V Server: 2012 R2, 2016 & 2019
VMware vSphere: 6.0 U3, 6.5 U2 & 6.7 U1
ClearVM: 7.6 & 8.0
Red Hat Enterprise Linux (RHEL): 7.6 w/ Kbase (64-bit only)
SUSE Linux Enterprise Server (SLES): 12 SP4 and 15 SP1 (includes Xen) (64-bit only) |
| Rack mount installation | HPE 1U Small Form Factor Easy Install Rail Kit
Additional:
- Cable management
- Front panel overlay with locking capability
- HPE 1U Gen10 SFF Ball Bearing Rail Kit |
| Built-in controls | HPE iLO (HPE Integrated Lights-Out) 4GB NAND, Firmware HPE iLO5 - status monitoring, alerts and reports, remote management
UEFI - secure server configuration and boot in accordance with the industry standard Unified Extensible Firmware Interface (UEFI)
HPE RESTful API - application developer interface
Intelligent Provisioning - a tool for automated deployment of server infrastructure
Embedded Remote Support - built-in remote support tools that provide automatic transmission of information about hardware events to HP service departments |
| BIOS | HPE Server Unified Extensible Firmware Interface (UEFI) |
| Dimensions | Height 4.29 cm, Width 43.46 cm, Depth 70.7 cm |
| Weight | Minimum 13 kg, maximum 16 kg |
| Power supply | 100/240 VAC, 6.7/3.3 A, 50/60 Hz |
| Operating Environment | Operating temperature from +10°C to +35°C
Storage temperature from -30°C to +60°C
Humidity no more than 90% |
| Noise level | Idle - 32 dBa (1P) / 36 dBa (2P)
Under load - 35 dBa (1P) / 38 dBa (2P) |
| Warranty | 1 year warranty, service center |