| Characteristic |
Description |
 | |
| Base Configuration | HPE ProLiant DL360 Gen10 Plus, part number P55242-B21 |
| Form Factor | 1U, rack mountable |
| CPU | Intel Xeon Silver 4314 processor: 16 cores, 24 MB L3 cache, 2.4/3.4 GHz operating frequency, 2 UPI 10.4 GT/s channels, TDP 135 W
Maximum number of processors per server - 2, 32 logical CPUs per system in Hyper-Threading mode
Maximum RAM frequency supported by the processor, 2667 MHz
Maximum RAM capacity supported by the processor, 6 TB
Processor socket Socket-P4 (LGA 4189), Intel Ice Lake (Gen3) architecture, 10 nm process technology |
| Chipset | 'Intel C621A Chipset, 20 PCIe 3.0 lanes, up to 14 SATA ports, 14 USB 2.0, 10 USB 3.0, management port |
| RAM | Preinstalled 32 GB memory: 1 HPE 32GB (1x32GB) Dual Rank x4 DDR4-3200 CAS-22-22-22 Registered Smart Memory Kit
Supported memory types:
HPE SmartMemory DDR4 Registered DIMM (RDIMM) - up to 32 modules
HPE SmartMemory DDR4 Load Reduced DIMM (LRDIMM) - up to 32 modules
Maximum RAM 4096 GB (16x256GB) for LRDIMM, 1024 GB (16x64GB) for RDIMM per processor
Four dual-channel memory controllers per processor (8 channels total per CPU), 32 DIMM slots (16 per CPU, 2 memory modules per channel)
Memory operating frequency of 2667 MHz (limited by processor)
Maximum memory subsystem bandwidth of 171 GB/s per processor
Support for HPE SmartMemory, Advanced ECC, Online Spare technologies
Support for Intel Optane persistent memory 200 series (PMem) |
| Disk subsystem | Up to 8 Hot Plug 2.5" SFF SAS/SATA HDD/SSD hot-swap drives in front panel cage
Additional front Universal Media Bay (one of the following):
- 2-drive hot-swap SAS/SATA 2.5" SFF HDD/SSD cage, includes cable;
- 2-drive hot-swap U.3 SAS/SATA/NVMe 2.5" SFF hot-swap drive cage, includes cable (connects to Tri-Mode controller or motherboard NVMe ports, compatible with NVMe drivesU.3)
- basket for 2 NVMe drives U.2 or U.3 2.5" SFF hot-swappable, includes cable (connects to Tri-Mode controller or motherboard NVMe ports, compatible with U.2 and U.3 NVMe drives)
- DVD-RW or DVD-ROM installation cage + Display port & USB 2.0.
Additionally, up to two M.2 PCIe 3.0 boot drives x4 22110 with installation in one of the following ways:
- via optional Riser1 (x16 FH, x16 LP slots, 2 M.2 PCIe 3.0 x4 slots, built-in RAID controller with RAID 1 support);
- via expansion board in any PCIe slot (the board has 2 M.2 PCIe 3.0 x4 slots, built-in RAID controller with RAID 1 support); |
| Disk subsystem controller | RAID module Broadcom MegaRAID MR416i-a Controller for HPE 12Gb SAS (RAID 1/10/5/50/6/60/HBA) 8 Ports Internal, Smart Path, 4GB Cache
Connected to the main cage for 8 SAS/SATA drives
A battery is installed to protect the controller's cache memory
Integrated SATA controller of the chipset (12 ports)
Can be used to connect an additional cage for 2 SAS/SATA drives (SATA drives only)
8 NVMe PCIe 4.0 x4 ports on the motherboard (4 SLIMLINE x8 connectors), support for RAID 0/1/10/5 based on Intel VROC Key
1 connector can be used to connect an additional cage for 2 NVMe drives
Additionally:
HPE Smart Array RAID controller in the expansion slot for connecting an additional 2-drive SAS/SATA enclosure (requires cable)
Tri-Mode controller in expansion slot for connecting an additional 2-drive SAS/SATA/NVMe or NVMe enclosure (requires cable) |
| Network controller | HPE Ethernet 10Gb 2-port BASE-T Broadcom BCM57416 OCP 3.0 I/O Module
1GbE Management Port (Dedicated iLO connector)
Additional network adapters in expansion slots |
| Expansion slots | Riser Card 1 (Primary Riser, CPU1), installed by default:
Slot 1 PCIe 4.0 x16/x16 9.5" Length/Full Height Slot connection to CPU1
Slot 2 PCIe 4.0 x16/x16 9.5" Length/Low Profile Slot connection to CPU1
Optional Riser Card 1 with 2 PCIe 3.0 x4 ports for M.2 22110 drives (RAID1 support):
Slot 1 PCIe 4.0 x16/x16 9.5" Length/Full Height Slot connection to CPU1
Slot 2 PCIe 4.0 x8/x8 9.5" Length/Low Profile Slot connection to CPU1
Optional Riser Card 1 with 2 PCIe 4.0 x4 ports NVMe, SLIMLINE x8 connector (in 10-drive NVMe configurations)
Slot 1 PCIe 4.0 x16/x16 9.5" Length/Full Height Slot connection to CPU1
Slot 2 PCIe 4.0 x8/x8 9.5" Length/Low Profile Slot connection to CPU1
Secondary Riser (CPU2), optional:
Slot 3 PCIe 4.0 x16/x16 9.5" Length/Low Profile Slot connection to CPU2
Secondary Riser (CPU2), optional, Slot 2 Riser Card 1 is not supported:
Slot 3 PCIe 4.0 x16/x16 9.5" Length/Full Height Slot connection to CPU2 |
| Optical storage | DVD-RW or DVD-ROM optical drive (optional)
Requires installation of Universal Media Bay (DVD-RW/DVD-ROM Slot, Display port, USB 2.0) in the front panel bay |
| Interfaces | Front: 1 x USB 3.0, iLO Service Port, optional: Display Port (disables rear video), USB 2.0
Rear: 2 x USB 3.0, DB-15 Video, 2 x 10GbE RJ-45, 1GbE RJ-45 Management Port, optional Serial
Internal Ports: 2 x USB 3.0 |
| Video adapter | Integrated video standard, 1920 x 1200 @ 60 Hz (32 bpp)
Up to two HPE NVIDIA T4 Graphics Accelerator GPUs |
| Power Unit | x HPE 800W Hot-Swappable Redundant Platinum-level Power Supply (94%) OR
2 x HPE 800W Hot-Swappable Redundant Platinum-level Power Supplies (94%) |
| Cooling | hot-swappable, redundant, controllable system fans on 1-CPU configurations
7 hot-swappable, redundant, controllable system fans on 2-CPU configurations
Optional: High-Performance Cooling System, required when certain options are selected |
| Supported Operating Systems | Windows Server 2016: Essentials, Standard, Datacenter
Windows Server 2019: Essentials, Standard, Datacenter
Microsoft Hyper-V Server: 2016 & 2019
VMware vSphere: 6.7 U3 w/P03, 7.0 U2
Red Hat Enterprise Linux (RHEL): 7.9, 8.2 (64 bit, includes KVM)
SUSE Linux Enterprise Server (SLES): 12 SP5, 15 SP2 (64 bit, includes KVM & Xen) |
| Rack mount installation | Set of retractable rails
Additionally:
- cable organizer
- front panel overlay with locking option |
| Built-in controls | HPE iLO (HPE Integrated Lights-Out) 4GB NAND, Firmware HPE iLO5 - status monitoring, alerts and reports, remote management
UEFI - secure server configuration and boot in accordance with the industry standard Unified Extensible Firmware Interface (UEFI)
HPE RESTful API - application developer interface
Intelligent Provisioning - a tool for automated deployment of server infrastructure
Embedded Remote Support - built-in remote support tools that provide automatic transmission of information about hardware events to HP service departments |
| BIOS | HPE Server Unified Extensible Firmware Interface (UEFI) |
| Dimensions | Height 4.29 cm, Width 43.46 cm, Depth 74.19 cm |
| Weight | Minimum 13 kg, maximum 18 kg |
| Power supply | 100/240 VAC, 6.7/3.3 A, 50/60 Hz |
| Operating Environment | Operating temperature from +10°C to +35°C, humidity no more than 90%
Storage temperature from -30°C to +60°C, humidity no more than 95%
Humidity no more than 90% |
| Noise level | Idle - 39 dBa
Under load - 47 dBa |
| Warranty | 1 year warranty, service center |