www.team.ru
Поиск
sales@team.ru

HPE P9H95A. Technical specifications [EOL]

ENG | RUS

HPE P9H95A base configuration discontinued.
Used in server HPE ProLiant ML110 Gen10.

Previous photo Zoom photo Next photo

Platform characteristics P9H95A

Characteristic  Description
Base ConfigurationHPE ProLiant ML110 Gen9, part number P9H95A
Form FactorPedestal
CPU1 Intel Xeon E5-2609 v3 processor: 6 cores, 15MB L3 cache, 1.9GHz operating frequency (Turbo Boost is not supported)
Maximum number of processors per server - 1, 6 logical CPUs per system (Hyper-Threading technology is not supported)
Maximum RAM frequency supported by the processor is 1600MHz
ChipsetIntel C610 Series Chipset
RAMPreinstalled 16 GB memory: 2 HPE 8GB (1x 8GB) Single Rank x8 DDR4-2133 CAS-15-15-15 Registered Memory Kit
Supported memory types: HPE SmartMemory DDR4 Load Reduced DIMM (LRDIMM), DDR4 Registered DIMM (RDIMM)
Maximum RAM 256GB (8x32GB) for LRDIMM, 256GB (8x32GB) for RDIMM
Quad-channel memory controller integrated into CPU, 2 modules per channel, 8 modules per CPU, 8 modules per server
Memory operating frequency 1600 MHz (limited by processor)
Maximum memory subsystem bandwidth 51.2 GB / s per processor
Support for HPE SmartMemory, Advanced ECC, Online Spare technologies
Disk subsystemUp to 4x Non-Hot Plug 3.5" LFF SATA HDDs with Fixed Installation
Installed Drives: None
Disk subsystem controllerIntegrated RAID controller HPE Dynamic Smart Array B140i Controller
10 ports SATA 6Gb/s, RAID 0/1/10/5 support (Software RAID), Zero Memory Cache, HBA Mode support
Additional:
HBA adapter HPE H241 12Gb SAS Smart Host Bus Adapter (RAID 0/1/10/5) 8 Ports External
RAID controller HPE Smart Array P441/4GB FBWC 12Gb SAS Controller (RAID 1/10/5/50/6/60) 8 Ports External
RAID controller HPE Smart Array P841/4GB FBWC 12Gb SAS Controller (RAID 1/10/5/50/6/60) 16 Ports External
Controller cache protection battery
Network controllerIntegrated network controller HPE Ethernet 1Gb 2-port Broadcom 5717C0 Adapter
Additional network cards in expansion slots (maximum 5 expansion slots)
Optional 1GbE management port (Dedicated iLO connector)
Expansion slots1 slot - PCIe 3.0 x16/x16 Full Height 3/4 Length
2 slot - PCIe 3.0 x4/x4 Full Height Half Length
3 slot - PCIe 3.0 x8/x8 Full Height Half Length
4 slot - PCIe 3.0 x4/x4 Full Height Half Length
5 slot - PCIe 3.0 x8/x8 Full Height Half Length
Optical storageOne HPE 9.5mm SATA DVD-RW JackBlack Gen9 Optical Drive
InterfacesFront: 2 x USB 3.0
Rear: 2 x USB 3.0, 2 x USB 2.0, DB-15 Video, 2 x GbE RJ-45, RJ-45 Management Port (Optional)
Internal Ports: Micro SD Slot, USB 3.0, USB 2.0
Compliance with industry standardsACPI 2.0b Compliant
PCIe 3.0 Compliant
PXE Support
WOL Support
Novell Certified
IPMI 2.0, SMASH CLP, DCMI 1.0 compliant
Microsoft® Logo certifications
USB 3.0 Support
SMBIOS 2.7.1
ASHRAE A3
Video adapterIntegrated Matrox G200eH2 video standard, 1280 x 1024 (32 bpp), 1920 x 1200 (16 bpp)
Power Unitx HPE 750W Hot-swap Redundant Power Supply
Optional second power supply for redundancy
Coolingx non-hot-swappable, non-redundant system fan
1 x additional fan when expansion cards are installed (optional)
Supported Operating SystemsMicrosoft Windows Server
Canonical Ubuntu
Red Hat Enterprise Linux (RHEL)
SUSE Linux Enterprise Server (SLES)
VMware
Rack mount installationNot supported
Built-in controlsHPE iLO (HPE Integrated Lights-Out) 2GB NAND, Firmware HPE iLO4 2.0 - status monitoring, alerts and reports, remote management
(No dedicated management port, uses the built-in network adapter)
UEFI - secure server configuration and boot in accordance with the industry standard Unified Extensible Firmware Interface (UEFI)
HPE RESTful API - application developer interface
Intelligent Provisioning - a tool for automated deployment of server infrastructure
Embedded Remote Support - built-in remote support tools that provide automatic transmission of information about hardware events to HP service departments
SafetyPower-on password
Setup password
Serial interface control
Power switch security
Administrator's password
TPM 1.2
UEFI
BIOSHPE Server Unified Extensible Firmware Interface (UEFI) / Legacy BIOS Boot Mode
DimensionsHeight 44.0 cm, Width 19.5 cm, Depth 48.05 cm
WeightMinimum 12 kg, maximum 24 kg (depending on configuration)
Power supply100/240 VAC, 6.7/3.3 A, 50/60 Hz
Operating EnvironmentOperating temperature from +10°C to +35°C
Storage temperature from -30°C to +60°C
Humidity no more than 90%
Noise levelIdle - 25 dBa
Under load - 27 dBa
WarrantyHP 3-year 9x5 Standard Warranty with First Year Onsite Service, Next Business Day Response Time