|
Intel Server System R1208WFTYS archive platform.
Used in server Team Server R1000WF.
Intel Server Board S2600WFT archive platform.
Used in server Team Server R1000WF.
1U, rack mountable archive platform.
Used in server Team Server R1000WF.
Maximum Thermal Design Power (TDP) - 165W per processor (platform limitation)
Supported processors: Intel Xeon Bronze 3000, Silver 4000, Gold 5000, Gold 6000, Platinum 8000
Processor socket FCLGA3647 (Socket P), Intel Skylake (Gen1) / Cascade Lake (Gen2) architecture, 14nm process technology
Supports DDR4-2133/2400/2666/2933 Registered and Load reduced ECC memory, including 3DS
Up to 28 cores and 56 threads per processor, up to 38.5MB L3 cache per processor
Support for Intel Hyper-Threading, Intel Turbo Boost, Intel AVX-512 technologies
Support for processors with integrated Intel Omni-Path HFI 100 Gb/s network interfaces
Up to 112 logical CPUs per server with Intel Hyper-Threading technology
Intel C624 Chipset archive platform.
Used in server Team Server R1000WF.
- DDR4 ECC Registered Memory (RDIMM) 1.2V, DDR4 ECC Registered Memory 3DS (RDIMM 3DS) 1.2V
- DDR4 ECC Load Reduced Memory (LRDIMM) 1.2V, DDR4 ECC Load Reduced Memory 3DS (LRDIMM 3DS) 1.2V
Maximum RAM:
- for RDIMM - 768 GB (24 x 32 GB), for LRDIMM - 1536 GB (24 x 64 GB)
- for RDIMM 3DS - 3072 GB (24 x 128 GB), for LRDIMM 3DS - 3072 GB (24 x 128 GB), support for 128 GB modules only for processors with the "M" index
Memory operating modes: 2133/2400/2666/2933 MT/s (depending on processor model)
Two integrated triple-channel memory controllers (IMC) in each processor
Total 6 channels per CPU, two memory modules per channel (2 DPC)
Total 12 memory modules per CPU, 24 memory modules per server
Integrated Intel Ethernet Controller X557 network controller, 2 x 10 Gb Ethernet RJ-45 ports
Replaceable Intel I/O module in the OCP bay via a connector on the motherboard (one of):
- Intel Dual RJ-45 port 10 Gb Ethernet OCP Module X557T2OCPG1P5 (Intel Ethernet Controller X557-T2)
- Intel Dual SFP+ port 10 Gb Ethernet OCP Module X527DA2OCPG1P5 (Intel Ethernet Controller X527-DA2)
Up to two Intel Omni-Path network interfaces when installing processors with the "F" index
(An additional installation kit is required, including an external port board and a set of cables,
external ports can be installed either in the OCP bay or in the PCI slot).
Additionally - Up to two network adapters in standard PCIe 3.0 slots
(second PCIe 3.0 slot is only functional when a second processor is installed)
- support for RSTe 5.0 RAID 0/1/10/5, ESRT2 1.60 RAID 0/1/10, RAID 5 - optional)
Integrated sSATA controller, 4 x 6Gb/s ports:
- 2 x 6Gb/s ports, (2 x 7-pin SATA connectors without SATA DOM support)
- 2 x M.2 ports for 2280 SATA or PCIe drives (left slot x4, right slot x2)
- support for RSTe 5.0 RAID 0/1, ESRT2 1.60 RAID 0/1 (for SATA drives only)
2 x OCuLink connectors for NVMe drives (PCIe 3.0 x4 interface) with connection to CPU1
2 OCuLink connectors for NVMe drives (PCIe 3.0 x4 interface) with connection to CPU2
Support for Intel Volume Management Device (Intel VMD): hot-swappable and bootable from NVMe drives
Support for Intel Virtual RAID on Chip (Intel VROC): Boot RAID 0/1/10/5, Write-Back Cache, LED Management for NVMe drives (optional)
Additional Intel RAID module with installation in a special PCIe 3.0 x8 connector on the motherboard (OCP bay), except for processors with the "F" index
Additional HBA adapters and/or SAS/SATA/NVMe RAID controllers in expansion slots
Additional Intel 4-Port PCIe 3.0 x8 NVMe Switch Add-In Card, 4 OCuLink ports in the expansion slot
Basement without port expander:
- 2 HD Mini-SAS 12Gb/s connectors - connect up to 8 SAS/SATA drives
- 8 OCuLink connectors - connect up to 8 NVMe drives
Connection options for PCIe NVMe drives:
- to 4 OCuLink ports on the server motherboard
- to 4 OCuLink ports on the Intel 4-Port PCIe 3.0 x8 NVMe Switch Add-In Card, installed in the PCIe slot
- to 2 or 4 internal ports of a RAID controller or Tri-Mode HBA adapter (requires HD Mini-SAS - OCuLink cables)
For NVMe drives Hot swap and boot mode are supported.
RAID support on NVMe drives requires installation of the Intel VROC Upgrade Key
- M.2 2280 drives with SATA interface
- M.2 2280 drives with PCIe x4 (upper slot) and PCIe x2 (lower slot) interface
SSD drives with PCIe interface in standard expansion slots
External only via USB port archive platform.
Used in server Team Server R1000WF.
Rear: DB-15 video connector, RJ-45 serial port A, RJ-45 GbE management port, 3 USB 3.0 ports
Internal ports: Type-A USB 2.0, DH-10 Serial Port B
Integrated 2D video controller, 16MB DDR3 Memory archive platform.
Used in server Team Server R1000WF.
Indication: Power LED, System Status LED, HDD activity LED, 1 & 2 Network activity LEDs, System ID LED
Support for Intel Server Management Software
Built-in RJ-45 GbE remote management port
Advanced remote management functions (KVM, Virtual Media over LAN) via Intel RMM4 Lite module (optional)
Red Hat RHEL 7.3, Red Hat RHEL 6.8, SUSE SLES 12 SP2, SUSE SLES 11 SP4
VMware ESXi 6.0 Update 3, VMware ESXi 6.5, Ubuntu 14.04.3 LTS, CentOS 7.3
Full list
A second 1100W 80 Plus Platinum power supply unit can be installed for redundancy
Power subsystem operating modes: 1+0, 1+1 Redundant Power, 2+0 Combined Power
A 48V DC 750W 80 Plus Gold power supply unit (one or two) can be installed
1 fan per power supply
Height 4.32 cm, width 43.9 cm, depth 71.0 cm (full 79.4 cm) archive platform.
Used in server Team Server R1000WF.
Fixed mount kit (optional)
Cable management (optional)
180-264 VAC, 9-3.5 A, 47-63 Hz archive platform.
Used in server Team Server R1000WF.
Storage temperature from -40°C to +70°C
Relative humidity during storage from 50% to 90%
No more than 70 dBA archive platform.
Used in server Team Server R1000WF.
Standard 36 months warranty, on-site service archive platform.
Used in server Team Server R1000WF.
| 