| Characteristic |
Description |
 | |
| Platform | Server platform Intel Server System R2208WF0ZSR |
| Server Board | Intel Server Board S2600WF0R |
| Form Factor | 2U, rack mountable |
| Processor | 1 or 2 Intel® Xeon® Scalable Processors
Maximum thermal design power (TDP) - 205W per processor
Supported processors: Intel Xeon Bronze 3000, Silver 4000, Gold 5000, Gold 6000, Platinum 8000
Processor socket FCLGA3647 (Socket P), Intel Skylake (Gen1) / Cascade Lake (Gen2) architecture, 14nm process technology
Supports DDR4-2133/2400/2666/2933 Registered and Load reduced ECC memory, including 3DS
Up to 28 cores and 56 threads per processor, up to 38.5MB L3 cache per processor
Support for Intel Hyper-Threading, Intel Turbo Boost, Intel AVX-512 technologies
Support for processors with integrated Intel Omni-Path HFI 100 Gb/s network ports
Up to 112 logical CPUs per server with Intel Hyper-Threading Technology
Maximum amount of RAM supported by the processor:
- for Xeon Scalable Gen1: 768GB for all models
- for Xeon Scalable Gen2: 2TB for models with index "M", 4.5TB for models with index "L", 1TB for all other models.
Supports Intel® Optane™ DC Persistent Memory in Memory Mode, APP Direct Mode, Mixed Mode (Xeon Scalable Gen2 only). |
| Chipset | Intel C624 Chipset |
| System Memory | Memory types:
- DDR4 ECC Registered Memory (RDIMM) 1.2V, DDR4 ECC Registered Memory 3DS (RDIMM 3DS) 1.2V
- DDR4 ECC Load Reduced Memory (LRDIMM) 1.2V, DDR4 ECC Load Reduced Memory 3DS (LRDIMM 3DS) 1.2V
Maximum RAM:
- for RDIMM - 768 GB (24 x 32 GB), for LRDIMM - 1536 GB (24 x 64 GB)
- for RDIMM 3DS - 3072 GB (24 x 128 GB), for LRDIMM 3DS - 3072 GB (24 x 128 GB),support for 128 GB modules only for processors with index "M"
Memory operating modes: 2133/2400/2666/2933 MT/s (depending on processor model)
Two integrated triple-channel memory controllers (IMC) on each processor
Total 6 channels per CPU, two memory modules per channel (2 DPC)
Total 12 memory modules per CPU, 24 memory modules per server |
| Network Adapters | Dedicated 1 Gb Ethernet RJ-45 management port
Replacement Intel I/O module into OCP bay via motherboard connector (one of):
- Intel Dual RJ-45 port 10Gb Ethernet OCP Module X557T2OCPG1P5 (Intel Ethernet Controller X557-T2)
- Intel Dual SFP+ port 10Gb Ethernet OCP Module X527DA2OCPG1P5 (Intel Ethernet Controller X527-DA2)
- Intel Quad SFP+ port 10Gb Ethernet OCP Module X527DA4OCPG1P5 (Intel Ethernet Controller X527-DA4)
Intel Quad RJ-45 port 1Gb Ethernet OCP Module I357T4OCPG1P5 (Intel Ethernet Controller I357-T4)
Up to two Intel Omni-Path network interfaces when installing processors with the "F" index
(Requires additional installation kit including external port board and cable kit,
External ports can be installed either in the OCP bay or in the PCI slot).
Additionally - up to eight network adapters in standard PCIe 3.0 slots
Installed network ports - no |
| Expansion Slots | Riser 1: 2 x PCIe 3.0 x8/x16 FHFL CPU1, 1 x PCIe 3.0 x8/x8 FHHL CPU2
Riser 2: 2 x PCIe 3.0 x8/x16 FHFL CPU2, 1 x PCIe 3.0 x8/x8 FHHL CPU2
Riser 3: 1 x PCIe 3.0 x8/x8 LP CPU2, 1 x DMI 3.0 x4/x8 LP CPU2
Optionally, instead of Riser 1 and/or Riser 2, it is possible to install alternative riser cards:
Riser card with 1 PCIe 3.0 x16/x16 FHFL and 1 PCIe 3.0 x8/x8 FHHL slot |
| Disk Subsystem Controller | Integrated SATA controller, 8 ports 6Gb/s (2 connectors 4-port mini-SAS HD):
support RSTe 5.0 RAID 0/1/10/5, ESRT2 1.60 RAID 0/1/10, RAID 5 - optional)
Integrated sSATA controller, 4 ports 6Gb/s:
- 2 x 6Gb/s ports, (2 x 7-pin SATA connectors without SATA DOM support)
- 2 x M.2 ports for 2280 SATA or PCIe drives (left slot x4, right slot x2)
- support RSTe 5.0 RAID 0/1, ESRT2 1.60 RAID 0/1 (only for SATA drives)
2 x OCuLink NVMe storage connectors (PCIe 3.0 x4 interface) with connection to CPU1
2 x OCuLink NVMe slots (PCIe 3.0 x4 interface) with CPU2 connection
Intel Volume Management Device (Intel VMD) support: hot-swappable and bootable from NVMe drives
Intel Virtual RAID on Chip (Intel VROC) support: Boot RAID 0/1/10/5, Write-Back Cache, LED Management for NVMe drives (optional)
Additionally, an Intel RAID module with installation in a special PCIe 3.0 x8 slot on the motherboard (OCP bay), except for processors with the "F" index
Additionally, HBA adapters and/or SAS/SATA/NVMe RAID controllers in expansion slots
Additional Intel 4-Port PCIe 3.0 x8 NVMe Switch Add-In Card, 4 OCuLink ports in expansion slot
Additional Intel 8-Port PCIe 3.0 x8 NVMe Switch Add-In Card, 8 OCuLink ports in expansion slot
SAS 12 Gb/s port expander with 28 internal ports and 8 external ports in PCIe slot (optional)
SAS 12 Gb/s Port Expander with 36 Internal Ports (Optional) |
| Disk Subsystem | Up to 16 hot-swappable 2.5" SAS/SATA HDDs or 2.5" SAS/SATA/NVMe SSDs
One or two 8-drive cages each without port expander (second cage optional):
- 2 HD Mini-SAS 12Gb/s connectors - connection of up to 8 SAS/SATA drives per basket
- 8 OCuLink connectors - connect up to 8 2.5" SSD drives with NVMe interface per cage
Possible to install cages for 2.5" SAS/SATA 12Gb/s Dual Port drives (without NVMe support)
Up to 2 x 2.5" SATA SSDs with fixed installation
Up to 2 x 2.5" SATA hot-swappable SSDs in rear panel cage (optional)
Options for connecting drives with PCIe NVMe interface:
- to the OCuLink ports on the server motherboard (4 ports)
- to the OCuLink ports of the Intel 4-Port PCIe 3.0 x8 NVMe Switch Add-In Card installed in the PCIe slot
- to the OCuLink ports of the Intel 8-Port PCIe 3.0 x8 NVMe Switch Add-In Card installed in the PCIe slot
- to the ports of a RAID controller or Tri-Mode HBA adapter (requires HD Mini-SAS - OCuLink cables)
Hot swap and boot mode are supported for NVMe drives.
RAID support on NVMe drives requires installation of the Intel VROC Upgrade Key |
| Additional Storage | Up to two internal drives in M.2 2280 ports, possible options:
- M.2 2280 drives with SATA interface
- M.2 2280 drives with PCIe x4 (upper slot) and PCIe x2 (lower slot) interface
PCIe SSD drives in standard expansion slots |
| Optical Storage | External only via USB port |
| Interfaces | On the front panel: DB-15 video connector, 2 USB 3.0 connectors
Rear panel: DB-15 video connector, 2 RJ-45 10GbE ports, RJ-45 serial port A, RJ-45 GbE management port, 3 USB 3.0 ports
Internal ports: Type-A USB 2.0, DH-10 Serial Port B |
| Video Adapter and GPU | Integrated 2D video controller, 16MB DDR3 Memory |
| Control Panel | Control buttons: Power, Reset, System ID, NMI
Indication: Power LED, System Status LED, HDD activity LED, 1 & 2 Network activity LEDs, System ID LED |
| Management and Monitoring | Integrated Baseboard Management Controller, IPMI 2.0 Compliant
Intel Server Management Software Support
Built-in RJ-45 GbE remote management port
Advanced remote management functions (KVM, Virtual Media over LAN) via Intel RMM4 Lite module (optional) |
| Supported Operating Systems | Windows Server 2016, Windows Server 2012 R2, Windows® 10 version 1511
Red Hat RHEL 7.3, Red Hat RHEL 6.8, SUSE SLES 12 SP2, SUSE SLES 11 SP4
VMware ESXi 6.0 Update 3, VMware ESXi 6.5, Ubuntu 14.04.3 LTS, CentOS 7.3
Full list |
| Power Unit | 1 x 1300W 80 Plus Titanium Removable Power Supply
A second 1300W 80 Plus Titanium power supply can be installed for redundancy
Power subsystem operating modes: 1+0, 1+1 Redundant Power, 2+0 Combined Power
Possible to install 48V DC 750W 80 Plus Gold power supplies (one or two) |
| System Cooling | x 60mm redundant, hot-swappable system fans
1 fan in each power supply |
| Dimensions | Height 8.9 cm, width 43.9 cm, depth 71.2 cm (full 79.4 cm) |
| Rack Mount Installation | Slide-out rails for rack mounting (optional)
Fixed mounting kit (optional)
Cable manager (optional) |
| Power Supply Parameters | 180-264 VAC, 13-5.1 A, 47-63 Hz |
| Operating Environment | Operating temperature from +10°C to +35°C
Storage temperature from -40°C to +70°C
Relative humidity during storage from 5% to 90% |
| Noise Level | No more than 70 dBA |
| Warranty | Standard warranty 36 months, 9 x 5, service at the service center |