| Characteristic |
Description |
 | | | Platform | Server platform Intel Server System R2208WTTYC1R MIC |
| Server Board | Intel Server Board S2600WTTR |
| Form Factor | 2U, rack mountable |
| Processor | 1 or 2 Intel Xeon E5-2600 v3/Intel Xeon E5-2600 v4 processors, TDP no more than 145W per processor
Processor socket FCLGA2011-3 (Socket R3), Intel Haswell EP/Broadwell EP architecture, 22/14nm process technology
DDR4 ECC memory support, up to 18/22 cores, up to 45/55MB LLC cache per processor
Support for Intel Hyper-Threading, Intel Turbo Boost technologies
Up to 72/88 logical CPUs per server with Intel Hyper-Threading Technology |
| Chipset | Intel C612 chipset |
| System Memory | Memory types: DDR4 ECC Registered Memory (RDIMM) 1.2V, DDR4 ECC Load Reduced Memory (LRDIMM) 1.2V
Maximum RAM: for RDIMM - 768 GB (24 x 32 GB), for LRDIMM - 3072 GB (24 x 128 GB)
Memory operating modes: 1600/1866/2133/2400 MT/s (depending on memory type, processor model and number of modules per channel)
For DDR4 RDIMM - 2133/2400 MT/s (1 DIMM per Channel, DPC) / 1866/2133 MT/s (2 DPC) / 1600/1866 MT/s (3 DPC)
For DDR4 LRDIMM - 2133/2400 MT/s (1 DPC & 2 DPC) / 1600/1866 MT/s (3 DPC)
Quad-channel memory controller: 4 channels per CPU, 3 DIMMs per channel, total 24 DIMM slots per server |
| Network Adapters | Integrated network controller Intel Ethernet Controller X540, 2 ports 10Gb Ethernet RJ-45
Dedicated 1 Gb Ethernet RJ-45 management port
Additionally - up to 6 network adapters in standard PCIe 3.0 slots
Additionally - a replaceable Intel I/O module in a special slot on the PCIe 3.0 x8 motherboard:
- Intel Quad RJ-45 port 1Gb Ethernet I/O Module AXX4P1GBPWLIOM ( - Intel Ethernet Controller I350)
- Intel Dual RJ-45 port 10Gb Ethernet I/O Module AXX10GBTWLIOM ( - Intel Ethernet Controller X540)
Intel Dual SFP+ port 10Gb Ethernet I/O Module AXX10GBNIAIOM ( - Intel Ethernet Controller 82599ES)
Intel Single QSFP port 40Gb Ethernet I/O Module AXX1P40FRTIOM (XL710-AM2 Ethernet Controller)
- Intel Dual QSFP port 40Gb Ethernet I/O Module AXX2P40FRTIOM (XL710-AM2 Ethernet Controller)
- Intel Single QSFP port 56Gb FDR InfiniBand I/O Module AXX1FDRIBIOM (MT27504A1-FCCR-FV)
- Intel Dual QSFP port 56Gb FDR InfiniBand I/O module AXX2FDRIBIOM (MT27508A1-FCCR-FV) |
| Expansion Slots | Riser 1: 1 x PCIe 3.0 x16/x16 FHFL CPU1, 1 x PCIe 3.0 x8/x8 FHHL CPU2
Riser 2: 1 PCIe 3.0 x16/x16 FHFL CPU2 slot, 1 PCIe 3.0 x8/x8 FHHL CPU2 slot
Riser 3: 1 x PCIe 3.0 x8/x8 LP CPU2, 1 x PCIe 2.0 x4/x8 LP CPU2 |
| Disk Subsystem Controller | Integrated SATA controller, 6 ports 6Gb/s (2 connectors 7-pin single port, 1 connector 4-port mini-SAS HD)
Integrated SATA controller, 4 ports 6Gb/s, (1 connector 4-port mini-SAS HD)
Integrated controllers support RSTe 4.1 (RAID 0/1/10/5), ESRT2 1.41 (RAID 0/1/10, RAID 5 - optional) technologies
Additionally, an Intel RAID module installed in a special PCIe 3.0 x8 slot on the motherboard:
- Intel RAID SAS Module RMS3JC080, LSI3008, 8P(int) 12 Gb/s, ZM, RAID 0/1/10/1E/JBOD
Intel RAID SAS Module RMS3HC080, LSI3008, 8P(int) 12 Gb/s, ZM, RAID 0/1/10/5/50/JBOD
- Intel RAID SAS Module RMS3CC040, LSI3108, 4P(int) 12 Gb/s, 1GB, RAID 0/1/10/5/50/6/60
Intel RAID SAS Module RMS3CC080, LSI3108, 8P(int) 12 Gb/s, 1GB, RAID 0/1/10/5/50/6/60
- Intel RAID SAS Module RMS25JB040, LSI2308, 4P(int) 6 Gb/s, ZM, RAID 0/1/10/1E/JBOD
- Intel RAID SAS Module RMS25JB080, LSI2308, 8P(int) 6 Gb/s, ZM, RAID 0/1/10/1E/JBOD
- Intel RAID SAS Module RMS25CB040, LSI2208, 4P(int) 6 Gb/s, 1GB, RAID 0/1/10/5/50/6/60
- Intel RAID SAS Module RMS25CB080, LSI2208, 8P(int) 6 Gb/s, 1GB, RAID 0/1/10/5/50/6/60
- Intel RAID SATA Module RMT3CB080, LSI2208, 8P(int) 6 Gb/s, 512, RAID 0/1/10/5/50/6/60
Additionally, HBA adapters and/or RAID controllers from Intel, LSI or Adaptec in PCIe 3.0 expansion slots
SAS 12 Gb/s Port Expander with 28 Internal Ports and 8 External Ports (Optional)
SAS 12 Gb/s Port Expander with 36 Internal Ports (Optional) |
| Disk Subsystem | Up to 8 hot-swappable 2.5" SAS/SATA HDD/SSD drives
Up to 2 x 2.5" SATA SSDs with fixed installation
Up to 2 x 2.5" SATA hot-swappable SSDs in rear panel cage (optional)
Total of up to 24 hot-swappable 2.5" SAS/SATA HDD/SSD drives (with two additional cages)
Optional up to 8 x 2.5" PCIe SFF drives when installing NVMe cages (dual CPU configurations only) |
| Additional Storage | Up to two internal low-profile SATA DOM drives
Additional internal eUSB storage |
| Optical Storage | Slim DVD-RW optical drive (optional) |
| Interfaces | On the front panel: DB-15 video connector, 2 USB 3.0 connectors
Rear panel: DB-15 video connector, 2 RJ-45 10GbE ports, RJ-45 serial port A, RJ-45 GbE management port, 3 USB 3.0 ports
Internal ports: Type-A USB 2.0, DH-10 Serial Port B |
| Video Adapter and GPU | Integrated 2D video controller, 16MB DDR3 Memory |
| Control Panel | Control buttons: Power, Reset, System ID, NMI
Indication: Power LED, System Status LED, HDD activity LED, 1 & 2 Network activity LEDs, System ID LED
Additionally, a control panel with a display and 2 USB 3.0 ports |
| Management and Monitoring | Integrated Baseboard Management Controller, IPMI 2.0 Compliant
Intel Server Management Software Support
Built-in RJ-45 GbE remote management port
Advanced remote management functions (KVM, Virtual Media over LAN) via Intel RMM4 Lite module (optional) |
| Supported Operating Systems | Compatibility and stress: Windows 2012 R2, Windows 2012 R2 EFI, Windows 2012 R2 Hyper-V, RHEL 6.5, SLES 11 SP3
Basic installation and compatibility: VMware ESXI 5.5, Windows 2008 R2 SP1, Windows 7 SP1, Ubuntu 13.04
Basic installation: FreeBSD 9.2, CentOS 6.5 |
| Power Unit | 2 x 1100W 80 Plus Platinum Removable Power Supplies
Power subsystem operating modes: 1+1 Redundant Power, 2+0 Combined Power |
| System Cooling | x 60mm redundant, hot-swappable system fans
1 fan in each power supply |
| Dimensions | Height 8.9 cm, width 43.9 cm, depth 71.2 cm (full 79.4 cm) |
| Rack Mount Installation | Slide-out rails for rack mounting (optional)
Fixed mounting kit (optional)
Cable manager (optional)
Front panel cover to prevent unauthorized access (optional) |
| Power Supply Parameters | 180-264 VAC, 13-5.1 A, 47-63 Hz |
| Operating Environment | Operating temperature from +10°C to +35°C
Storage temperature from -40°C to +70°C
Relative humidity during storage from 5% to 90% |
| Noise Level | No more than 70 dBA |
| Warranty | Standard 36 months warranty, on-site service |
|