| Characteristic |
Description |
 | |
| Platform | Supermicro AS-1115HS-TNR Server Platform |
| Server Board | MBD-H13SSH
One AMD EPYC 9004 processor (Genoa/Bergamo), max TDP 360W
24 slots for installing DDR5-4800 memory modules
16 SATA ports, 3 USB 3.0 ports, IPMI, 2 M.2 PCIe 2280/22110 slots
2 PCIe 5.0 x16 slots for installing riser cards, PCIe 5.0 x16 OCP 3.0 slot, 128 PCIe 5.0 lanes
20 PCIe 5.0 x4 ports for connecting NVMe/SATA drives or riser cards (10 MCIO x8 connectors)
Baseboard Management Controller Aspeed AST2600 |
| Server Chassis | CSE-HS119-R1K24P2-A |
| Form Factor | 1U, rack mountable
Rails included |
| Processor | 1 AMD EPYC 9004 processor with a maximum TDP of 360W, support for AMD 3D V-Cache Technology
Processor socket Socket SP5 (LGA 6096), AMD Zen 4 (Genoa/Bergamo) architecture, 5 nm process technology
Up to 128 cores, 256 threads, operating frequency up to 4.1 GHz (maximum 4.4 GHz in Boost mode)
Up to 1152 MB L3 cache per CPU, per core: 1024 KB L2, 32 KB (I)+ 32 KB (D) L1
Support for AMD Infinity Guard, AMD Infinity Architecture technologies
128 PCIe 5.0 lanes per CPU
Supports ECC DDR5-4800 memory, up to 6 TB per CPU, integrated 12-channel memory controller |
| Chipset | System on Chip (SoC) (the chipset is built into the processor) |
| System Memory | Maximum RAM (the processor supports a maximum of 6TB of RAM):
- for RDIMM - 1536 GB (24 x 64 GB)
for RDIMM 3DS - 6144 GB (24 x 256 GB)
Memory modes: 4800 MT/s (1 DPC), 4000 MT/s (2 DPC)
Integrated 12-channel memory controller (IMC) on the processor
Total 12 channels per CPU, one or two memory modules per channel (1 DPC/2 DPC)
Total 24 memory modules per CPU, 24 memory modules per server
Memory subsystem bandwidth 460.8 GB/s |
| Network Controller | Without integrated network controller
Dedicated 1 Gb Ethernet RJ-45 management port
Additionally:
- network module with installation in a socket on the OCP 3.0 motherboardPCIe 5.0 x16 fromCPU
- up to three network adapters in standard expansion slotsPCIe 5.0 x16 |
| Expansion Slots | 1 slotPCIe 5.0 x16/x16 full height 10.5" long (FHFL) from CPU via riser card
1 slotPCIe 5.0 x16/x16 full height 10.5" long (FHFL) from CPU via riser card
1 slotPCIe 5.0 x16/x16 full height half length (FHHL) fromCPU, via riser card
SlotPCIe 5.0x16 OCP 3.0 on the motherboard for installing a network module, connecting toCPU |
| Disk Subsystem Controller | Integrated SATA controller, 8 ports 6Gb/s, MCIO x8 connector (CPU)
8 NVMe PCIe 5.0 x4 ports, 4 MCIO x8 (CPU) slots
2 x M.2 2280/22110 PCIe 3.0 x4 and x2 SSD slots on motherboard
Additionally (selection in the Configurator fields "Disk subsystem controller" and "HBA adapter):
- RAID controller, HBA adapter or Tri-Mode controller in the PCIe 5.0 expansion slot for SAS3 and/or SATA drives;
- Tri-Mode controller for an alternative option for connecting NVMe drives to PCIe 5.0 expansion slots. |
| Disk Subsystem | Up to 8 hot-swappable 2.5" SAS3/SATA3/NVMe Gen5 U.2/U.3 HDD/SSD drives in a cage on the front panel of the server.
Connectors on the basket for connecting cables:
- 2 SLIMLINE x4 connectorsLP for SAS3/SATA drives;
- 4 MCIO x8 slots for NVMe PCIe 5.0 x4 drives (U.2 or U.3)
Storage device connection options:
For SATA drives:
- to the integrated SATA-controller of the CPU with the cable MCIO x8 -> 2 x SLIMLINE x4LP (up to 8 drives, additional cable required).
For SATA and/or SAS drives:
- to SAS RAID controller or HBA with SLIMLINE x8 -> 2 x SLIMLINE x4 cable LP(up to 8 drives, additional cable required);
- to Tri-Mode controller with cable SLIMLINE x8 -> 2 x SLIMLINE x4LP(up to 8 drives, additional cable required).
For NVMe drives:
- to eight PCIe 5.0 x4 ports via four MCIO x8 connectors on the motherboard fromCPUMCIO x8 -> MCIO x8 cables (up to 8 drives, each pair of drives requires an additional cable) ,compartments 1-8).
- to the Tri-Mode controller using SLIMLINE x8 -> MCIO x8 cables (up to 4 drives per controller, an additional cable is required for each pair of drives). |
| Additional Storage | Up to two M.2 2280/22110 drives installed in slots on the motherboard:
- PCIe 3.0 x4 from CPU
- PCIe 3.0 x2 from CPU
Up to two or four M.2 PCIe 3.0 x4 2280/22110 drives installed on an expansion card in a PCIe slot.
Up to two M.2 SATA / PCIe 4.0 x4 2280/22110 drives installed on a SAS3808-based expansion card with RAID 0/1 support in a PCIe slot. |
| Optical Storage | Not supported |
| Interfaces | DB-15 video connector, rear panel
1Gb Ethernet RJ-45 management port, rear panel
USB 3.0 ports: 2 rear, 1 front |
| Video Adapter | Integrated video controller Aspeed® AST2600 Video Graphic Adapter, 1920x1200@60Hz 32bpp, DDR4 SDRAM
It is possible to install an additional video card, including a double-width one |
| Control Panel | Control buttons: Power On/Off, UID
Indication: Power Status LED, System Information LED, Network activity LED, HDD LED |
| Management and Monitoring | Intelligent Platform Management Interface v.2.0 (IPMI 2.0)
Virtual media over LAN, KVM-over-LAN, ASPEED AST2600 Base Management Controller (BMC)
Monitoring voltages, temperatures, fan speeds
Case opening sensor
The server comes with a license for remote BIOS update (SFT-OOB-LIC) |
| Supported Operating Systems | Current list |
| Power Unit | 2 x 1200W Titanium (AC) redundant hot-swappable power supplies |
| System Cooling | 8 x 40mm fixed mount dual rotor system fans |
| Dimensions | Height 4.3 cm, width 43.7 cm, depth 74.7 cm |
| Weight | 15 kg, in a package 23 kg (platform) |
| Power Supply Parameters | 200-240Vac / 7.5 - 6A / 50-60Hz |
| Operating Environment | Operating temperature from +10°C to +35°C
Storage temperature from -40°C to +70°C
Operating relative humidity from 8% to 90%
Relative humidity during storage from 5% to 95% |
| Warranty | Standard 36 months warranty, service at the service center |