www.team.ru
Поиск
sales@team.ru

Supermicro AS -2014CS-TR. Technical specifications

ENG | RUS

This server model is supplied as a ready-made solution only.
Assembled at Supermicro factory, lead time 6-8 weeks.
Minimum configuration: Processor, 4 memory modules, 1 HDD/SSD drive, 1 AIOM module
For optimal performance, the recommended number of memory modules is 8 or 16.
Single-socket server based on AMD EPYC 7002/7003 CPU
Typical application:
- Financial services
- Cloud applications
Network services
- Private clouds
- Content Delivery Networks (CDN)
- Machine learning
- Server for 1C

Previous photo Zoom photo Next photo
Please check availability

Platform characteristics AS -2014CS-TR

Characteristic  Description
PlatformSupermicro AS-2014CS-TR Server Platform
Server BoardSuper H12SSW-AN6
Server ChassisCSE-LA26TS-R920AWP
Form Factor2U, rack mountable
Rails included
Processor1 x AMD EPYC 7002/7003 processor with max TDP 280W
Processor socket Socket SP3, AMD Zen 2 (Rome) / Zen 3 (Milan) architecture, 7 nm process technology
Up to 64 cores, 128 threads, operating frequency up to 3.7 GHz (maximum 4.1 GHz in Boost mode)
Up to 256MB L3 cache per CPU, per core: 512KB L2, 64KB (I)+ 32KB (D) L1
Support for Precision Boost technologies, SMT multi-threading
2 x 128-bit FMAC compute units (4 floating point instructions per cycle)
128 PCIe 4.0 lanes
Supports ECC DDR4-3200 memory, up to 4TB, integrated eight-channel memory controller
ChipsetSystem on Chip (SoC) (the chipset is built into the processor)
System MemoryMemory types: ECC DDR4 Registered DIMM (RDIMM), ECC DDR4 Load Reduced DIMM (LRDIMM)
Memory operating frequency 3200 MT/s
Maximum capacity: for RDIMM - 2048GB (16x128GB), for LRDIMM - 4096GB (16x256GB)
Eight-channel memory controller, 16 DIMM slots (2 modules per channel)
Memory subsystem bandwidth from 85.3 GB/s to 204.8 GB/s depending on the processor model
Network ControllerOne or two AIOM PCIe 4.0 x16 modules of OCP 3.0 standard (1/2/4 ports 1GbE/10GbE/25GbE/100GbE per module)
Dedicated management port RJ45 Dedicated IPMI LAN port
Expansion Slots4 PCIe 4.0 x16/x16 full-height 10.5" long (FHFL) slots via riser cards
Or 6 slots:
2 PCIe 4.0 x16/x16 full-height 10.5" long (FHFL) slots via riser cards
2 x PCIe 4.0 x8/x16 full-height 10.5" long (FHFL) via riser cards
2 x PCIe 4.0 x8/x16 full-height half-length (FHFL) slots via riser cards
Disk Subsystem ControllerIntegrated SATA controller, 16 ports 6Gb/s, connector SLIMLINE x8 , 2 connectorsSLIMLINE x4 Low Profile, combined with 4 NVMe PCIe 4.0 x4 ports
12 NVMe PCIe 4.0 x4 ports, 3 connectorsSLIMLINE x8 , 6 connectorsSLIMLINE x4 LowProfile on the motherboard (8 of 12 ports are used for expansion cards)
2 x M.2 2280/22110 PCIe 4.0 x4 SSD slots on motherboard
Additionally: SAS RAID controllers or SAS/FC HBA adapters from the configurator list in expansion slots
Disk SubsystemUp to 12 hot-swappable 3.5"/2.5" HDD/SSD SAS3/SATA3/NVMe in the basket on the front panel
Cable connection sockets on the basket: 3 socketsSLIMLINE x4 for SAS/SATA drives, 6 connectorsSLIMLINE x8 for NVMe drives
Installing more than 4 NVMe drives in the front panel cage is possible by using the ports that the expansion slots are connected to.
It is also possible to connect additional NVMe drives to 3-Mode controllers.
Additional cables are required to install NVMe drives with motherboard or 3-Mode controller connections.
Additional cables are required to install SAS drives connected to a RAID controller or HBA.
Additionally:
2 x 2.5" SAS/SATA/NVMe drives in rear cage (optional)
Additional StorageUp to 2 M.2 2280/22110 PCIe 4.0 x4 drives in motherboard slots
Up to 2 M.2 2260/2280/22110 drives with PCIe 3.0 x4 interface when installing an additional cage in the form of a PCIe 3.0 x8 expansion card
Up to 4 M.2 2260/2280/22110 drives with PCIe 3.0 x4 interface when installing an additional cage in the form of a PCIe 3.0 x8 expansion card
Up to 2 x M.2 2280/22110 PCIe 3.0 x4 or SATA drives when installed in an expansion card with Boot RAID 0/1 support based on Broadcom SAS3408
Optical StorageNot supported
InterfacesDB-15 video connector, rear panel
up to 8 network ports on the rear panel (depending on the type of AIOM modules selected)
1Gb Ethernet RJ-45 management port, rear panel
2 USB 3.0 ports on the rear panel
2 internal USB 2.0 ports
1 serial port on rear panel
Video AdapterIntegrated ASPEED AST2600 BMC Graphics controller
Control PanelControl buttons: Power On/Off, UID
Indication: Power Status LED, HDD activity LED, 2 x Network activity LED, UID LED
Management and MonitoringIntelligent Platform Management Interface v.2.0 (IPMI 2.0)
Virtual media over LAN, KVM-over-LAN, ASPEED AST2600 Base Management Controller (BMC)
Monitoring voltages, temperatures, fan speeds
Case opening sensor
The server comes with a license for remote BIOS update (SFT-OOB-LIC)
Supported Operating SystemsCurrent list
Power Unitx 920W Platinum Hot-Swap Redundant Power Supplies (AC)
System Cooling3 x 80mm hot-swappable system fans, 13.5K RPM
DimensionsHeight 8.9 cm, width 43.7 cm, depth 64.8 cm
Weight16.1 kg, in packaging 26.8 kg (platform)
Power Supply Parameters200 - 240Vac / 4.5 - 3.8A / 50-60Hz
Operating EnvironmentOperating temperature from +10°C to +35°C
Storage temperature from -40°C to +60°C
Operating relative humidity from 8% to 90%
Relative humidity during storage from 5% to 95%
WarrantyStandard 36 months warranty, service at the service center