| Characteristic |
Description |
 | |
| Platform | Supermicro AS-2024S-TR Server Platform |
| Server Board | Super H12DSi-N6 |
| Server Chassis | CSE-LA26TS-R920LPP1 |
| Form Factor | 2U, rack mountable
Rails included |
| Processor | 2 x AMD EPYC 7002/7003 processors with max TDP 240W each
For each processor:
Processor socket Socket SP3, AMD Zen 2 (Rome) / Zen 3 (Milan) architecture, 7 nm process technology
Up to 64 cores, 128 threads, operating frequency up to 3.7 GHz (maximum 4.1 GHz in Boost mode)
Up to 256MB L3 cache per CPU, per core: 512KB L2, 64KB (I)+ 32KB (D) L1
Support for Precision Boost technologies, SMT multi-threading
2 x 128-bit FMAC compute units (4 floating point instructions per cycle)
128 PCIe 4.0 lanes per CPU, 64 of which are used as interprocessor interface
Supports ECC DDR4-3200 memory, up to 4TB per CPU (up to 8TB total), integrated eight-channel memory controller |
| Chipset | System on Chip (SoC) (the chipset is built into the processor) |
| System Memory | Memory types: ECC DDR4 Registered DIMM (RDIMM), ECC DDR4 Load Reduced DIMM (LRDIMM)
Memory operating frequency 3200 MT/s
Maximum capacity: for RDIMM - 2048GB (16x128GB), for LRDIMM - 4096GB (16x256GB)
Eight-channel memory controller per processor, 16 DIMM slots (8 per CPU)
Memory subsystem bandwidth from 85.3 GB/s to 204.8 GB/s depending on the processor model |
| Network Controller | Integrated network controller, 2 Ethernet 1Gb RJ-45 ports based on BROADCOM BCM5720
Dedicated management port RJ45 Dedicated IPMI LAN port
Additionally:
- up to six network adapters in standard expansion slotsPCIe 4.0 x16 |
| Expansion Slots | 1) PCIe 4.0 x8/x8 Low Profile slot from CPU2
2) PCIe 4.0 x16/x16 Low Profile slot from CPU2
3) PCIe 4.0 x8/x8 Low Profile slot from CPU1
4) PCIe 4.0 x16/x16 Low Profile slot from CPU1
5) PCIe 4.0 x8/x8 Low Profile slot from CPU1
6) PCIe 4.0 x16/x16 Low Profile slot from CPU1 |
| Disk Subsystem Controller | Integrated SATA controller, 10 x 6Gb/s ports (4 from CPU1, 6 from CPU2), 10 x 7-Pin SATA connectors on the motherboard (2 of which support SATA DOM)
4 NVMe PCIe 4.0 x4 ports, 2 SLIMLINE x8 connectors on the motherboard,connection to CPU2
1 x M.2 2280/22110 PCIe 4.0 x4 SSD slot on motherboard, connect to CPU1
Additionally (selection in the Configurator fields "Disk subsystem controller" and "HBA adapter):
- RAID controller, HBA adapter or Tri-Mode controller in the PCIe 4.0 expansion slot for SAS3 and/or SATA drives;
HBA or Tri-Mode controller for connecting NVMe drives to PCIe 4.0 expansion slots. |
| Disk Subsystem | Up to 12 hot-swappable 3.5"/2.5" SAS3/SATA3/NVMe Gen4 U.2/U.3 HDD/SSD drives in the front panel cage of the server.
Connectors on the basket for connecting cables:
- 3 SLIMLINE x4 connectors for SAS3/SATA drives;
- 6 SLIMLINE x8 slots for NVMe PCIe 4.0 x4 drives (U.2 or U.3)
Storage device connection options:
For SATA drives:
- to the integrated SATA controller CPU1 (4 ports) and CPU2 (4 ports) with two cables 4 x 7-Pin SATA -> SLIMLINE x4 (connected for 8 drives, bays 1-8)
For SATA and/or SAS drives:
- to SAS RAID controller or HBA with cables HD Mini-SAS -> SLIMLINE x4 or SLIMLINE x8 -> 2 x SLIMLINE x4(up to 12 drives, additional cables required);
- to the Tri-Mode controller using cables 2 x HD Mini-SAS -> 2 x SLIMLINE x4 or SLIMLINE x8 -> 2 x SLIMLINE x4 (up to 12 drives, additional cables required).
For NVMe drives:
- to 4 PCIe 4.0 x4 ports via two SLIMLINE x8 connectors on the motherboard fromCPU2cables SLIMLINE x8 -> SLIMLINE x8 (connected for 4 drives, bays 9-12);
- to 4 PCIe 4.0 x4 ports of the HBA adapter (installed in the PCIe 4.0 x16 expansion slot) via 2 SLIMLINE x8 connectors with SLIMLINE x8 -> SLIMLINE x8 cables (up to 4 drives per HBA, HBA and additional cables are required);
- to the Tri-Mode controller using SLIMLINE x8 -> SLIMLINE x8 cables (up to 4 drives per controller, an additional cable is required for each pair of drives). |
| Additional Storage | Up to 2 SATA DOM (Disk-On-Module) drives to SATA connectors on motherboard, connecting to CPU2.
One M.2 PCIe 4.0 x4 2280/22110 drive installed in a slot on the motherboard, connected to CPU1.
Up to two M.2 PCIe 3.0 x4 2280/22110 drives installed on an expansion card in a PCIe slot.
Up to two M.2 SATA / PCIe 4.0 x4 2280/22110 drives installed on a SAS3808-based expansion card with RAID 0/1 support in a PCIe slot. |
| Optical Storage | Not supported |
| Interfaces | DB-15 video connector, rear panel
2 x 1Gb Ethernet RJ-45 network ports, on the rear panel
1Gb Ethernet RJ-45 management port, rear panel
2 USB 3.0 ports on the rear panel
2 USB 2.0 ports on the rear panel
1 serial port on rear panel |
| Video Adapter | Integrated ASPEED AST2600 BMC Graphics controller |
| Control Panel | Control buttons: Power On/Off, System Reset
Indication: Power LED, HDD activity LED, 2 x Network activity LED, System Info LED / Power Fail LED |
| Management and Monitoring | Intelligent Platform Management Interface v.2.0 (IPMI 2.0)
Virtual media over LAN, KVM-over-LAN, ASPEED AST2600 Base Management Controller (BMC)
Monitoring voltages, temperatures, fan speeds
Case opening sensor
The server comes with a license for remote BIOS update (SFT-OOB-LIC) |
| Supported Operating Systems | Current list |
| Power Unit | x 920W Platinum Hot-Swap Redundant Power Supplies (AC) |
| System Cooling | 3 x 80mm hot-swappable system fans, 9.4K RPM |
| Dimensions | Height 8.9 cm, width 43.7 cm, depth 64.8 cm |
| Weight | 15.2 kg, in packaging 27.2 kg (platform) |
| Power Supply Parameters | 200-240Vac / 10 - 8A / 50-60Hz |
| Operating Environment | Operating temperature from +10°C to +35°C
Storage temperature from -40°C to +70°C
Operating relative humidity from 8% to 90%
Relative humidity during storage from 5% to 95% |
| Warranty | Standard 36 months warranty, service at the service center |