| Characteristic |
Description |
 | |
| Platform | Supermicro AS-2024US-TRT Server Platform |
| Server Board | MBD-H12DSU-iN |
| Server Chassis | CSE-829U2TS-R1K62P3-T |
| Form Factor | 2U, rack mountable
Rails included |
| Processor | 2 AMD EPYC 7002/7003 processors with a maximum TDP of 280W each
For each processor:
Processor socket Socket SP3, AMD Zen 2 (Rome) / Zen 3 (Milan) architecture, 7 nm process technology
Up to 64 cores, 128 threads, operating frequency up to 3.7 GHz (maximum 4.1 GHz in Boost mode)
Up to 256MB L3 cache per CPU, per core: 512KB L2, 64KB (I)+ 32KB (D) L1
Support for Precision Boost technologies, SMT multi-threading
2 x 128-bit FMAC compute units (4 floating point instructions per cycle)
128 PCIe 4.0 lanes per CPU, 64 of which are used as interprocessor interface
Supports ECC DDR4-3200 memory, up to 4TB per CPU (up to 8TB total), integrated eight-channel memory controller |
| Chipset | System on Chip (SoC) (the chipset is built into the processor) |
| System Memory | Memory types: ECC DDR4 Registered DIMM (RDIMM), ECC DDR4 Load Reduced DIMM (LRDIMM)
Memory operating frequency 3200 MT/s
Maximum capacity: for RDIMM - 4096GB (32x128GB), for LRDIMM - 8192GB (32x256GB)
Eight-channel memory controller per processor, 32 DIMM slots (16 per CPU)
Memory subsystem bandwidth from 85.3 GB/s to 204.8 GB/s depending on the processor model |
| Network Controller | Integrated network controller, 2 Ethernet 10Gb RJ-45 ports based on Intel® X710-AT2
Dedicated management port RJ45 Dedicated IPMI LAN port |
| Expansion Slots | Slots from CPU#1 via a riser card combined with a network input/output module (2U Ultra Riser with 2-port 10G RJ45):
- 1 x PCIe 4.0 x16/x16 full height 9.5" long (FHFL DW)
- 1 x PCIe 4.0 x8/x16 full height 9.5" long (FHFL DW)
- 1 PCIe 4.0 x8/x16 low profile 6.6" (LPHL) internal slot
Slots from CPU#2 via riser card:
- 1 PCIe 4.0 x16/x16 low-profile 6.6" (LPHL) slot, right riser card
- 2 x PCIe 4.0 x16/x16 full height 10.5" long (FHFL DW), left riser card |
| Disk Subsystem Controller | Integrated SATA controller, 16 ports 6Gb/s, Slimline x8(CPU#1), x4(CPU#2), x4(CPU#2) connectors on the motherboard,
Of these, 12 ports are connected to the front panel cage (the SATA ports are combined with 4 NVMe PCIe 4.0 x4 ports that are not used).
4 NVMe PCIe 4.0 x4 ports, Slimline x8(CPU#1), x8(CPU#2) connectors on the motherboard,
All 4 ports are connected to the last 4 bays of the front panel basket.
2 x 7-pin SATA ports with SATA DOM support with integrated power on the motherboard.
2 x M.2 2280/22110 PCIe 3.0 x4 SSD slots on optional expansion card.
1 USB 3.0 (Type A) connector on motherboard for eUSB storage.
Additionally: SAS RAID controllers or SAS/FC HBA adapters from the configurator list in expansion slots. |
| Disk Subsystem | Front panel 12-drive 3.5" drive cage.
Cable connection sockets on the basket: 3 socketsSLIMLINE x4 for SAS/SATA drives, 6 connectorsSLIMLINE x8 for NVMe drives
All 12 bays are connected to the integrated SATA controller via connectors on the motherboard,
Of these, the last 4 bays are also connected to NVMe ports (2 from CPU#1, 2 from CPU#2) via connectors on the motherboard.
Possible hot-swap drive options for installation in the front panel cage:
- up to 12 3.5/2.5" drivesSATA3 HDD/SSD with connection to the integrated SATA controller of the motherboard or
to an additional RAID controller or HBA (additional cables required);
- up to 12 3.5/2.5" drivesSAS3HDD/SSD with connection to additional RAID controller or HBA
(additional cables required);
- up to 4 2.5" drivesNVMe SSD with connection to PCIe 4.0 bus via Slimline ports on the motherboard,
(it is also possible to connect to an additional Tri-Mode controller for hardware RAID support).
To install 2.5" SATA/SAS/NVMe drives, 2.5"->3.5" adapter sleds are required.
Additionally, up to 2 hot-swappable 2.5" SATA3/SAS3 SSD drives in an additional basket in the riser card slot. |
| Additional Storage | Up to 2 SATA DOM (Disk-On-Module) drives to SATA connectors on the motherboard.
Up to 2 M.2 2260/2280/22110 drives with PCIe 3.0 x4 interface when installing an additional cage (PCIe 3.0 x8 expansion card). |
| Optical Storage | Not supported |
| Interfaces | DB-15 video connector, rear panel
x 10Gb Ethernet RJ-45 network ports, on the rear panel
1Gb Ethernet RJ-45 management port, rear panel
4 USB 3.0 ports: 2 rear, 1 internal Type A, 1 front
1 serial port on rear panel |
| Video Adapter | Integrated ASPEED AST2500 BMC Graphics controller |
| Computing Modules | Up to 2 GPU or video cards. |
| Control Panel | Control buttons: Power On/Off, System Reset
Indication: Power LED, HDD activity LED, 2 x Network activity LED, System Overheat LED / Fan Fail LED / UID LED |
| Management and Monitoring | Intelligent Platform Management Interface v.2.0 (IPMI 2.0)
Virtual media over LAN, KVM-over-LAN, ASPEED AST2500 Base Management Controller (BMC)
Monitoring voltages, temperatures, fan speeds
Case opening sensor
The server comes with a license for remote BIOS update (SFT-OOB-LIC) |
| Supported Operating Systems | Current list |
| Power Unit | 2 x 1600W Titanium (AC) redundant hot-swappable power supplies |
| System Cooling | x 80mm hot-swappable system fans, 13.5K RPM |
| Dimensions | Height 8.9 cm, width 43.7 cm, depth 72.3 cm |
| Weight | 16.4 kg, in packaging 32.7 kg (platform) |
| Power Supply Parameters | 200-240Vac / 10 - 8A / 50-60Hz |
| Operating Environment | Operating temperature from +10°C to +35°C
Storage temperature from -40°C to +70°C
Operating relative humidity from 8% to 90%
Relative humidity during storage from 5% to 95% |
| Warranty | Standard 36 months warranty, service at the service center |